Public Address and Intercom
The RS-150 single button indoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. The 4cm (1.57in) speaker provides clear audio and the single black call button allows for simple call-in operation. The call button can be programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The RS-180 panic vandal resistant single button outdoor call panel substation is ADA compliant and is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a 4cm (1.57in) speaker for clear audio and a single vandal resistant red anodized metal call button, with button bezel, allowing for simple call-in operation. The call button can be programmed to report to any master station based on job specification. Additionally the substation’s front faceplate is made from thick 11 gauge stainless steel stock for added durability and the circuit boards have been weather treated for moisture exposed installations. Visual call-in progress feedback is achieved with a red LED above the call switch. An open collector trigger is provided for local triggering by the call-in button for devices such as a strobe light or other indicator while a call is in progress. The substation requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The RS-170 vandal resistant single button outdoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a 4cm (1.57in) speaker for clear audio and a single vandal resistant metal call button, with button bezel, allowing for simple call-in operation. Additionally the substation’s front faceplate is made from thick 11 gauge stainless steel stock for added durability and the circuit boards have been weather treated for moisture exposed installations. The call button can be programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The N-8000AL is a Telephone interface unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It has a single telephone line interface, allowing an analog telephone to be connected. Connecting the unit to the LAN permits the analog telephone to be operated in the same manner as the intercom master station. It can be mounted in an EIA equipment rack (1U size) with the use of an optional rack mounting bracket or installed on a wall using an optional wall mounting bracket
Power Source | 120 V AC, 50/60 Hz |
---|---|
Power Consumption | 8 W (max.) |
Telephone Interface | Number of telephone line: 1 line Selective signal type: DTMF signal Monitoring function: Line Loop detection Control function: Caller ID function Wiring method: 1 pair of twisted pair cables Short-circuit current: 120 mA Open voltage: 24 V DC Calling signal output voltage: Max. 80 V (0-p) AC (16 Hz) |
Network Section | Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation) Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP Audio packet transmission system: Unicast, Multicast Number of paging destinations: Unicast (max. 8), Multicast (max. 191) Connector: RJ45 connector Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software) Quantifying bit number: 16-bit Voice encoding method: Sub-band ADPCM, Cryptosystem Voice packet loss recovery: Silence insertion Audio delay time: 80 ms, 320 ms (controllable on the software) |
Indication | Network LNK/ACT indication, Status lamp, Power-on indication lamp, Telephone status lamp |
Other | Firmware update function, System data hold function, Time of day hold facility, Reset switch (front panel) |
Setting Method | Rack, Desk, Surface mount |
Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) |
Operating Humidity | 90 %RH or less (no condensation) |
Finish | Pre-coated steel plate, black, 30 % gloss |
Dimensions | 210 (W) × 44.3 (H) × 267 (D) mm (8.27" × 1.74" × 10.51") |
Weight | 1.7 kg (3.75 lb) |
Accessory | Power cord (2 m (6.56 ft)) …1, CD (for PC setting, maintenance use) …1, Mini-clamp plug (2 pins) …2, Plastic foot …4, Screw for fitting plastic foot …4 |
Option | Rack mounting bracket: MB-15B-BK (for rack mounting one N-8000AL unit) MB-15B-J (for rack mounting two N-8000AL units) Wall mounting bracket: YC-850 |
The N-SP80 series SIP Video Intercom System offers flexible audio and video communications using standard SIP and Onvif protocols. It can integrate with external SIP compatible systems through a SIP server. Peer-to-Peer mode is also available for easy system configuration without a SIP server. TOA’s N-8000SG SIP gateway software is fully compatible with TOA’s N-8000 IP intercom system. The N-SP80MS1 can communicate with master and door stations, and control door station contact closure outputs.
Phone Features | Web support multi-language Auto-answer Volume control Direct IP call without SIP proxy Auto-Provision DTMF modes: Inband, RFC2833, SIP INFO Audio Features: VAD, CNG, AEC, G.165/G.168 |
Network Features | 2x10/100Mbps Ethernet Port 1xPoE(IEEE803.2af) Security: Password Protection, IP address filtering, SIP over TLS, HTTPS encryption, user access log Protocols support: IPv4, HTTP, HTTPS, FTP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP IP assignment: Static IP, DHCP, PPPoE |
SIP Features | SIP v1(RFC2543), SIP v2(RFC3261) Audio codecs: G.711a, G.711μ, G.722, G.723, G.729a/b, iLBC, AMR-NB/WB, OPUS Video codecs: H.263, H.264 Speech Quality: 7kHz Audio Echo Cancellation Voice Activation Detection Comfort Noise Generator |
Others | Android 4.2 Management by LCD Menu Configuration, WebUI Download content from the specified server Information receiving, storing, and rendering capabilities Web browser Contacts and Call records management Support playing local or online video |
Graphic Display | 7 inch capacitive touch screen TFT LCD, 800x480 pixels , 16:9 wide screen aspect ratio |
Camera | 2M pixels C-MOS camera, free rotation |
Resolution | up to 1080p |
Video Features | QCIF, QVGA, CIF, 4CIF, VGA Video bitrate: 64kbps~2Mbps PIP Full Screen local video ON/OFF control |
Hands-Free | Microphone and Speaker built-in |
Hand-set | Connected with a carl-cord |
External Interface | IEEE802.11 b/g/n, USB 2.0, 3.5mm headset jack, HDMI |
Power Source | PoE |
Power Consumption | less than 12W |
Installation | Desktop |
Operating Temperature | 0 °C 40 °C (32 °F- 104 °F) |
Finish | ABS |
Dimension | 240 (H) x 213 (W) x 120( D)mm (9.44" x 8.39" x 4.72" |
The N-SP80AS1 SIP Audio Door Station is designed to provide clear and intelligible communication to a Multimedia Station over an Ethernet network. It is equipped with an assignable call switch and two control relay outputs.
The N-SP80 series SIP Video Intercom System offers flexible audio and video communications using standard SIP and Onvif protocols. It can integrate with external SIP compatible systems through a SIP server. Peer-to-Peer mode is also available for easy system configuration without a SIP server. TOA’s N-8000SG SIP gateway software is fully compatible with TOA’s N-8000 IP intercom system.
Phone Features | Web support multi-language Auto-answer Volume control Direct IP call without SIP proxy Auto-Provision |
Network Features | 2x10/100Mbps Ethernet Port Security: Password Protection, IP address filtering, SIP over TLS, HTTPS encryption,user access log, SRTP (Secure RTP) Protocols support: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP |
SIP Features | SIP v1(RFC2543), SIP v2(RFC3261) Audio codecs: G.711a, G.711μ, G.722, G.729 Speech Quality: 7kHz Audio Echo Cancellation Voice Activation Detection Comfort Noise Generator |
Switches | 1 Call button, 1 reset button (on board) |
Microphone | 1 integrated microphone, IP67 |
Speaker | 1W, IP66 |
Control Input | 2 input relays for alarm/ (Voltage, Current) |
Control Output | 2 output relays for door opener/ (Voltage, Current) |
Indication | Status lamp (colours: red, green, blue) |
Power Source | 12V DC |
IP Grade | IP65 |
Installation | Flush-mounted, Fit in Clipsal 164/4 back box |
Operating Temperature | -20 ° ~ 55 °C (-4 °F - 131° F) |
Finish | Plate: Stainless steel |
Dimension | 210 (H) x1 20 (W) x 45.6 (D)mm (8.27" x 4.72" x 1.8") |
The N-SP80VS1 SIP Video Door Station is designed to provide clear and intelligible communication to a Multimedia Station over an Ethernet network. It is equipped with an assignable call switch, a night-view camera and two control relay outputs.
The N-SP80 series SIP Video Intercom System offers flexible audio and video communications using standard SIP and Onvif protocols. It can integrate with external SIP compatible systems through a SIP server. Peer-to-Peer mode is also available for easy system configuration without a SIP server. TOA’s N-8000SG SIP gateway software is fully compatible with TOA’s N-8000 IP intercom system.
one Features | Web support multi-language Auto-answer Volume control Direct IP call without SIP proxy Auto-Provision |
Network Features | 2x10/100Mbps Ethernet Port Security: Password Protection, IP address filtering, SIP over TLS, HTTPS encryption, user access log Protocols support: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP |
SIP Features | SIP v1(RFC2543), SIP v2(RFC3261) Audio codecs: G.711a, G.711μ, G.722, G.729 Video codecs: H.264 MPEG-4/MJEG (E21V only) Speech Quality: 7kHz Audio Echo Cancellation Voice Activation Detection Comfort Noise Generator |
Switches | 1 Call button, 1 reset button (on board) |
Camera | 3M pixels |
Resolution | up to 1080p |
Microphone | 1 integrated microphone, IP67 |
Speaker | 1W, IP66 |
Control Input | 2 input relays for alarm/ (Voltage, Current) |
Control Output | 2 output relays for door opener/ (Voltage, Current) |
Indication | Status lamp (colors: red, green, blue) |
Power Source | 12V DC |
Power Consumption | less than 12W |
IP Grade | IP65 |
Installation | Flush-mounted, Fit in Clipsal 164/4 back box |
Operating Temperature | -20 ° ~ 55 °C (-4 °F - 131° F) |
Finish | Plate: Stainless steel |
Dimension | 210 (H) x 120 (W )x 45.6 (D)mm (8.27" x 4.72" x 1.8") |
These Plena Economy mixer amplifiers are professional public address units with modern state-of-the-art features. They are easy to use, taking the complexity away from the user and putting it where it belongs, inside the equipment. Providing a crisp call or clear music is as easy as turning on the radio. Offering the essentials of public address in an affordable package.
Microphone and line inputs
All Mic/line inputs can be switched between microphone level and line level sensitivity. The inputs are balanced but can be used unbalanced. Phantom power can be switched on to provide power to condenser microphones.
Input channel 1 can take priority over all other microphone and music inputs: Input 1 can be activated by contact closure on the PTT (push to talk). A 2-tone chime can be configured to precede an announcement.
Music inputs
A separate music input is available with its volume control. The user can choose a music source like a CD player or radio (like the PLN-DVDT), and set the level of music.
Personalized settings
More unique features are available such as detachable labels where the user can write the names for inputs, music sources and zones. These labels can then be mounted on the front, protected by the clear window. Another useful feature is to indicate preferred settings on the front panel by inserting colored pins at the preset levels of all knobs. You can then instruct a user to set all the controls to the silver pins to configure the system for their particular use. A second user can set all controls to the red pins for their configuration.
Power
The mixer amplifiers come in 60, 120 and 240 Watt output power. This power is directly available on 70V constant voltage connections and on a low impedance connection for a 4 ohm load. Moreover, the amplifiers have a separate 70V call-only output channel for addressing areas where only priority announcements are required. The call-only output can also be used for 3-wire remote, volume control override.
Output status
An LED VU meter monitors the master output. A headphone socket, below the VU meter, provides the mixer output. For total reliability and ease of use, a limiter is integrated into the output stage to restrict output if the user applies too much signal.
Features:
- 4 microphone / line inputs, plus music source input
- Announcement only output, 3-wire volume override
- Wide range of output power (60, 120 and 240 Watts)
- 2-tone chime
The Plena tabletop microphone is a stylish, high-quality tabletop unidirectional condenser microphone, intended for making calls in a public address system. Its heavy metal base and rubber feet ensure stability on any flat surface. The special design also allows the unit to be neatly flush-mounted in desktops.
The PTT-key (press-to-talk), not only switches on the microphone, but also provides priority contacts, that are compatible with the Plena range of amplifiers. The switching characteristic of the PTT-key can be configured internally for PTT-mode (on as long as pressed) or toggle-mode (press to switch on, press again to switch off).
It is equipped with a fixed, flexible 2 m cable and a 5-pin Euro style connector for the balanced signal and the priority contact. If the priority contact is not required, the microphone can be connected to amplifiers with 3-pin Euro style connector. A green LED indicates when the microphone is active.
Features:
- PTT-key for calls for activation
- Momentary or toggle
- Green LED, indicating microphone active
- Stable metal base design with fixed 2 m cable and lockable Euro style connector
- Phantom powered by amplifier
Specifications:
- Phantom power supply Voltage range: 12 to 48 V
- Phantom power supply Current consumption: <8 mA
- Sensitivity: 0.7 mV @ 85 dB SPL (2 mV/Pa)
- Maximum input sound level: 110 dB SPL
- Distortion: <0.6% (maximum input)
- Input noise level (equiv.): 28 dB SPLA (S/N 66 dBA ref. 1 Pa)
- Frequency response: 100 Hz to 16 kHz
- Output impedance: 200 ohm
- Base dimensions (H x W x D): 1.57 x 3.97 x 9.25
- Weight: 2.2
- Color: Charcoal with silver
- Stem length with mic.: 15.35
- Cable length: 6.56
Description
Vandal-resistant call switch for intercom systems (general purpose signaling and switching) features a large red mushroom-style button with a heavy duty 11-gauge brushed stainless steel wall plate.
Compatible with Dukane, Rauland, Simplex, Telecor, most Bogen, Valcom, and other intercom systems
A & E Specs
The vandal-resistant call switch shall be Lowell model CSV-M, which shall be a single pole, single throw (SPST) momentary (normally open) switch with a rating of 2A 48VDC. It shall be mounted in a 1-gang 11-gauge stainless steel wall plate with brushed finish. The plate shall feature a red mushroom push button switch. It shall include vandal-resistant screws and driver bit.
Technical
- SPST call switch
- Rating: 2A 48VDC
- Function: Momentary (normally open)
- Push button: Red mushroom
- Pigtail connections
- Wall Plate: Heavy duty 11-gauge stainless steel with brushed finish
- Size: 1-gang
- 4.5 in. x 2.75 in. x 1.9 in.
Description
The vandal-resistant SPST call switch, for use with intercom systems, features a one-gang heavy duty stainless steel wall plate with brushed finish. The heavy duty construction is ideal for installation in areas prone to vandalism and includes tamper-resistant screws and a compatible driver bit. For general purpose signaling and switching, activation is via a silver-tone push button.
Compatible with Dukane, Rauland, Simplex, Telecor, most Bogen, Valcom, and other intercom systems
A & E Specs
The vandal-resistant call switch shall be Lowell model CSV, which shall be a single pole, single throw (SPST) momentary (normally open) switch with a rating of 2A 48VDC. It shall be mounted in a 1-gang 11-gauge stainless steel wall plate with brushed finish. The plate shall feature a silver push button switch. It shall feature screw terminals and include vandal-resistant screws and driver bit.
Technical
- SPST switch
- Rating: 2A 48VDC
- Function: Momentary (normally open)
- Push button: Silver
- Screw terminal connections
- Wall Plate: Heavy duty 11-gauge stainless steel with brushed finish
- Size: 1-gang
- 4.5 in. x 2.75 in. x 1.17 in.
Description
Call switch for use with intercom systems, general purpose signaling and switching, features a single pole, single throw (SPST) momentary rocker switch and one-gang wall plate. Stainless steel.
Compatible with Dukane, Rauland, Simplex, Telecor, most Bogen, Valcom and other intercom systems
Technical
- SPST rocker switch
- Rating: 24VDC 500mA
- Function: Momentary (normally open)
- Screw terminal connections
- Wall Plate: 1-gang standard
- Finish: Stainless Steel
- Lettering: PRESS TO CALL
- 4.5 in. x 2.75 in. x 0.875 in.