Accessories
KDock−4 is a USB−C hub multiport adapter specially designed to support mobile devices and is an ideal accessory for MacBook, laptops equipped with USB Type−C, smartphones, and tablets. KDock−4 enables you to connect your USB−C device to HDMI™, DisplayPort, and VGA video outputs, 2 USB 3.0 ports, 1 USB 2.0 ports, an Ethernet port, SD and micoSD card port and USB−C charging pass−through.
Note: Video output for smartphones is supported only for smartphones that support DisplayPort Alt mode through USB−C.
KDock−3 is a USB−C hub multiport adapter specially designed to support mobile devices and is an ideal accessory for MacBook, laptops equipped with USB Type−C, mobile phones, and tablets. KDock−3 enables you to connect your USB−C device to HDMI™ and DisplayPort video outputs, 2 USB 3.0 ports, an Ethernet port, SD card port and USB−C data and charging pass−through.
Note: Video output for smartphones is supported only for smartphones that support DisplayPort Alt mode through USB−C.
KDock−2 is a USB−C hub multiport adapter specially designed to support mobile devices and is an ideal accessory for MacBook, laptops equipped with USB Type−C, smartphones, and tablets. KDock−2 enables you to connect your USB−C device to an HDMI™ video output, 2 USB 3.0 ports, an Ethernet port, SD card port and USB−C port for data transmission and charging.
Note: Video output for smartphones is supported only for smartphones that support DisplayPort Alt mode through USB−C.
Description
Deliver the professional touch to your broadcast video, radio or audio recording studio with the Sescom FSL-1 On-Air light. This warning light keeps potential interruptions clear as you broadcast live on-air or over the internet. The Sescom FSL-1 triple sided light features On-Air on all sides. Perfect for video production studios, voiceover booths and podcasting, this light has been the trusted go to at NBC, CBS, ABC, ESPN, CNN and others for decades.The Sescom FSL-1 is made with an impact resistant housing, can be surface mounted over standard electrical junction boxes and is AC 110V operated. It includes a 25W red E26 incandescent bulb. Because it is a hard-wired light, you can easily tie on/off functionality to your control room.
Recommended Installation: Hardwire to 110v Junction Box
Features
- White Shell with Red Lettering
- Ceiling or Wall Mount Hard-Wired
- One-piece, UV-stabilized Polycarbonate Lens
- Medium Base Socket (standard incandescent)
Specifications:
- Lens: UV-stabilized Injection Molded Polycarbonate
- Baseplate: Rust Resistant, Tempered Marine-Grade Aluminum
- Thermal Insulation: Fiberglass Pad Controls Temperature Rise
- Gasket: Closed Cell Neoprene Gasket
- Mount Plate Dimensions: 8.75"H x 5.75"W
- Overall Light Dimensions: 9"H x 6"W x 4.75"D
Item Includes:
- FSB- Red Bulb
- Hardware for Connection to Electrical Box
- Foam Gasket
Warranty
- 1 Year
Many schools are using outdoor spaces for lessons to help distance students and a whiteboard is a key component in setting up an outdoor classroom. This handy easel is lightweight, has a comfortable shoulder strap for hands-free carrying, a marker pocket and a kickstand to set it up at an angle. It can sit on the ground, picnic tables or be used anywhere in a school and can also be hung by attaching the strap to the hooks (hangs portrait or landscape). Store inside.
For tips on setting up your outdoor classroom, read Copernicus Education's Real & Ready Classroom Stories blog post here.
Features
- Dry-erase and magnetic whiteboard
- 1 ½” wide adjustable nylon strap for carrying
- Strap can be attached to hooks to hang board in portrait or landscape orientation
- Storage pocket on the back to hold dry-erase markers
- Metal kickstand for standing up
Deliver the professional touch to your outside live streaming events with the portable FSL-10 On-Air-Streaming light. This warning light keeps potential interruptions clear as you broadcast live over the internet. Perfect for home studios, voiceover and podcasting the Sescom FSL-10 triple sided light features On-Air on the front and Streaming on the right and left sides. Its impact resistant housing can easily be surface mounted an operates on AC 110V with a plug-in cord and thumb switch. Bright cool white E12 LED candelabra bulb included.
Features:
- Portable Design Can be Placed Anywhere Using Included 3M Dual Lock Fasteners or Slotted Mounting Hole
- Plug In Cord with Thumb Switch
- White Shell with Red Lettering
- One-piece, UV-stabilized Polycarbonate Lens
Specifications:
- Lens: UV-stabilized Injection Molded Polycarbonate
- Back Plate:Lightweight, Laser Cut Plastic
- Overall Light Dimensions: 9"H x 6"W x 4.75"D
Item Includes:
- White LED Bulb
Warranty:
- 1 Year
Description
The School Bus Simulator from Dedicated Presentation Solutions is a custom-built, rack-mounted, interactive panel that emulates some of the lighting components of a modern school bus.
Each School Bus Simulator includes:
- Ignition key for power on and off
- Custom designed and fabricated metal panel, powder coated yellow, with cutouts for:
- Dome light
- Three clearance lights (one red, two yellow)
- Exterior light monitor
- Pilot light indicators for amber and red warning lights
- Switches for all electrical accessories, including door switch
- Custom bus unit number engraved in top-right corner
- Incandescent stop arm
- 12 volt power supply
- Rolling rack case for easy transport
As each school bus simulator is custom made by hand, it's customizable with your preferences. Contact us for other options beyond those shown on this ordering page.
Features
- Custom built to order with your preferences
- Easily transportable in a rolling rack case
- External parts such as stop arm and optional defogger fan detach and store inside
- 12-foot power cord
- Accessible power strip for plugging in additional accessories at trade shows, etc...
- Constructed with industry-standard parts makes service easy
Uses
- Trade shows
- Job fairs
- Driver and monitor recruiting events
- Driver training
- Mechanic training
- Collector's item for school bus and transit enthusiasts
Sequence of Operation
The school bus simulator is manufactured with New York State specifications in mind. Anytime the door switch is turned to the Open position, with the Master Flasher switch on, the red lights flash.
- Plug in power, turn key to On position.
- Turn on Master switch.
- Press Amber start switch. Amber warning lights flash, if so equipped.
- Turn door switch to Open position. Amber lights go out, red lights flash.
- Turn door switch to Closed position. Red lights go out.
The dome lights, clearance lights, bus number light (operated by the Destination Sign switch), and optional defogger fan operate independent of the warning light controls.
Turning the key switch off turns off power to the entire unit. If equipped with the Child Checkmate system, it activates accordingly.
Please note that the photos on this product page represent an early test design. The finished product you'll receive is fully enclosed and easily portable.
KWC−1 (Kramer Wireless Charging) is a built−in table mounted charging spot that enables you to charge your mobile device by simply placing it on the charging spot. It mounts flush with the table surface for an unobtrusive wireless charging solution.
If your mobile device does not feature wireless charging, you can connect it to a charging dongle (sold separately) and then place it on the charging spot.
- Elegant in–Table Solution
- Easy to Install — Drill a hole 4.17" to 4.25" (106 to 108mm) in tables less than 3" (76mm) thick.
- Qi Standard Compliant
This optional accessory creates a clean look for your installation while hiding signal cables and the power cord. See the Related Products tab for compatible projector models.
Also fits the following NEC projector models: NP-PA653U, NP-PA653U-41ZL, NP-PA653U-R, NP-PA803U, NP-PA803U-41ZL, NP-PA803U-R, NP-PA853W, NP-PA853W-41ZL, NP-PA853W-R, NP-PA903X, NP-PA903X-41ZL, NP-PA903X-R
A large 3.5-inch, built-in touchpad makes vertical scrolling intuitive. And multi-touch navigation makes it easier than ever to point and scroll your way through the web. Setup couldn't be easier - you simply plug the tiny wireless receiver into a USB port and enjoy. Even the hot keys work right out of the box without software. Whether you're surfing the web or e-mailing a friend, typing is just plain easy with sleek, low-profile keys that feel good and barely make a sound.
Key Selling Points
- Large 3.5-inch, built-in touchpad
- Plug-and-Play simplicity
- Comfortable, quiet typing
- Advanced 2.4 GHz wireless
- 128-bit AES encryption
- Easy-to-read keys
- Sleek and compact design
- Media hot keys
- Vertical storage
The Primacoustic VoxGuard is a portable acoustic screen designed to reduce the ambient noise around a microphone when recording. This helps to eliminate excess echo and reverb, allowing the engineer to reintroduce the desired effects during mixing or post-production. The VoxGuard DT is the free standing model designed to surround
microphones on desks and tables. Simply rest it behind your microphone as a table-top gobo to reduce ambience and echo.
The VoxGuard features high-density open cell acoustic foam that provides maximum absorption throughout the vocal range. An extra large high impact ABS outer shell keeps unwanted noise out, while innovative slotted ports prevent excess bass buildup and resonance commonly associated with stand-mounted absorbers. Once mounted, a rear access cable port allows any hand held or studio microphone to be articulated and directed at a specific source. The VoxGuard has been updated for 2015 and now features a window that allows the vocalist to maintain visual communication between the engineer, producer or other band members.
Unlike other similar offerings that employ heavy and cumbersome steel parts, the VoxGuard is lightweight and easy to use. The outer shell simply slides over the threads of the microphone stand and is held in place by the clip, shock mount, or included threaded adapters. For additional flexibility, an extension bar is included for infinite mic placement possibilities. The lightweight design and simple mounting hardware makes positioning the VoxGuard easy without the usual fear of the stand falling over and damaging the microphone.
Thanks to its simple and lightweight design, the VoxGuard can also be used as a portable acoustic gobo in front of amplifiers, acoustic instruments, or anywhere that basic isolation is required. This makes it and ideal tool for recording studios, film and television, pod casting, and mobile recording.
Features:
- Now features a window for improved sightlines
- Controls ambient space around the mic
- Creates intimate sound field
- Delivers cleaner, articulated vocal track
- High density acoustic foam liner
- High impact ABS outer shell
- Innovative rear access cable port
- Stand mounted version for most vocal mics
- Table-Top version for podcasting, interviews, etc.
- Larger surface area than competitive products
- Applications: Recording a podcast in the field, isolating instrument mic in studio, and recording vocals in the control room
Specifications:
- Baffel Material: SP-9010 ABS plastic shell, 3/16" (4.5mm) thick Black with textured finish
- Absorber Material: 1" High-density open cell acoustic foam, 2.2 lb/per cu-ft, charcoal color
- Dimensions: 14" (wide) x 12" (tall) x 7.5" (deep)
- Weight Distribution: Excellent
- Stability: Excellent
- Weight: 2.5 lbs
Item Includes:
- VoxGuard DT absorber