Great Equipment up to $2500

The BX-41F is a Flush Mount Backbox for the MW-41BT Audio Interface. It is designed to mount to a 2-gang box in indoor or in mild wet environments when sealed correctly.

The in-wall design and elegant appearance make this panel ideal for saving space and integrating with various facilities requiring a microphone, auxiliary, USB, or Bluetooth audio input.

Elite ProAV® Tension Pro, 300" Diag. 16:9, Tab-Tensioned Electric Motorized Drop Down Projection Screen, TP300XWH2

Camera, 8 MP, Joint arm, Auto Focus, LED lights, Mic, 1080p, HDMI, VGA , USB, SD card slot

Portable, Articulating arm, USB2.0, 8MP, Auto Focus, LED light, PC, 1080p

The vandal-resistant intercom station with optional call switch features a heavy duty 2-gang stainless steel wall plate, vandal-resistant screws, and driver bit.

The N-8640DS is an IP65, impact resistant IP door station with a separate microphone and speaker, allowing full duplex conversations with Master Stations.

The N-8000EX IP Intercom Exchange uses packet audio technology to permit connection of up to 16 N-8000 series 2-wire master or door stations.

The N-8650DS is an indoor IP door station with a separate microphone and speaker, allowing full duplex conversations with Master Stations

The N-8010EX IP Intercom Exchange uses packet audio technology to permit connection of up to 16 N-8000 series 2-wire master or door stations.

The N-8000RS Substation Interface Unit uses packet audio technology to permit connection of up to 16 RS-1xx series call switches or door stations.

Converts the output signal of the interface unit into a line level audio signal or a 25V line speaker output

The N-8000AF provides either an analog audio input/output bridge to the N-8000 system, a bell schedule generator with internal tones, or record functionality for archival purposes.

The N-8000CO is a C/O interface unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It has an analog central office line circuit, allowing the intercom station to make and receive calls to and from the telephone line.

The N-8000DI is a Direct select unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It is equipped with each 32 contact inputs and outputs, and the indicators on the front panel indicate the output statuses.

The N-8000MI is a multisource interface for the N-8000 intercom system.

The N-8011MS is a hands-free master station that connects to an N-8000EX or N-8010EX intercom exchange by a single twisted pair wire.

The N-8031SB is a PCB kit version of the N-8031MS for custom installations where a custom interface is desired. It connects to an N-8000EX or N-8010EX exchange by a single twisted pair cable.

The RS-140 dual button call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides Call (Red) and Privacy (white) buttons.

The N-8050SB is a printed circuit board unit for the N-8050DS Door Station, You can make the sub station suitable for applications using the N-8050SB in combination with the operation panel section to be prepared separately.