Kramer

The VM−24H is a distribution amplifier for HDMI signals. The unit reclocks and equalizes one of two selectable input signals and distributes it to four identical outputs.

• Max. Data Rate — 6.75Gbps (2.25Gbps per graphic channel).
• HDTV Compatible.
• HDCP Compliant.
• HDMI Support — Deep Color, x.v.Color™, Lip Sync, CEC.
• 3D Pass–Through.
• EDID Pass–through — Pass–through algorithm ensures Plug and Play operation for HDMI source and display systems.
• Active Output LED Indicators.
• Control — Front panel, RS–232, IR switching.
• Worldwide Power Supply — 100–240V AC.
• Standard 19” Rack Mount Size — 1U. Rack “ears” included.

The VM−22H is a distribution amplifier for HDMI signals. The unit reclocks and equalizes one of two selectable input signals and distributes it to two identical outputs.

• Max. Data Rate — 6.75Gbps (2.25Gbps per graphic channel).
• HDCP Compliant.
• HDMI Support — Deep Color, x.v.Color™, Lip Sync, CEC.
• 3D Pass–Through.
• EDID Pass–through — Pass–through algorithm ensures Plug and Play operation for HDMI source and display systems.
• Active Output LED Indicators.
• Control — Front panel or IR remote switching.
• Kramer Equalization & re–Klocking™ Technology — Rebuilds the digital signal integrity to travel longer distances.
• Compact DigiTOOLS® — 3 units can be rack mounted side–by–side in a 1U rack space with the recommended rack adapter.

VA−4X is a versatile 4K@60Hz (4:4:4) HDMI multi−channel extender that equalizes and reclocks TMDS data before re−transmitting the signal, thus increasing the HDMI cable range for all 4 outputs. It is a true 4−channel HDMI "Toolbox", with functionality including 4 independent test−pattern generators, chroma sub−sampling down−conversion and EDID management options, and, of course, video extension.

• Extension without Loss of Quality — Kramer Equalization & re–Klocking™ Technology rebuilds the digital signal integrity to travel longer distances. Typically extends 4K@60Hz (4:4:4) signals 20m from point to point (10m on the input and 10m on the output).
• Zero–latency compression — Enables reducing 4K@60Hz resolution from 4:4:4 to 4:2:2 or 4:2:0 chroma sampling on up to four HDMI signals.
• Easy EDID Management — Via a user–friendly software application or OSD menu, select from the following EDID options: default (internal), external (sink) or user defined EDID.
• Content Protection Compatibility — Interoperability between HDCP 2.2 and HDCP 1.4 systems for up to 4 HDMI sources simultaneously.
• Comprehensive Signal Testing — Independent pattern generator on each output with a variety of patterns and resolutions to choose from.
• Local Control and Configuration — Use the OSD menu via front panel buttons for management and control of the EDID, chroma reduction and pattern generator, and for firmware upgrade and factory reset. Convenient USB port for EDID application control and firmware upgrade.
• Easy Installation — Compact MegaTOOLS® fan–less enclosure for surface mounting or side–by–side mounting of 2 units in a 1U rack space with the recommended rack adapter.

The TP−574 is a DGKat™ twisted pair receiver for HDMI, bidirectional RS−232 and infrared signals. The TP−573 converts the input signals to a twisted pair signal and the TP−574 converts it back to HDMI, RS−232 and infrared signals.

• Max. Data Rate — 4.95Gbps (1.65Gbps per graphic channel).
• HDTV Compatible.
• HDCP Compliant.
• HDMI Support — x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS–HD.
• 3D Pass–Through.
• EDID PassThru — Passes EDID signals between the source and display.
• Bidirectional RS–232 & IR Interface. — 38400 max baud rate.
• System Range — Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and display used. If using third–party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly.
• DGKat™ Signal Integration — Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
• Power Connect System™ — A single connection to the transmitter powers both units.
• Compact DigiTOOLS® — 3 units can be rack mounted side–by–side in a 1U rack space with the recommended rack adapter.

The TP−573 is a DGKat™ twisted pair transmitter for HDMI, bidirectional RS−232 and infrared signals. The TP−573 converts the input signals to a twisted pair signal and the TP−574 converts it back to HDMI, RS−232 and infrared signals.

• Max. Data Rate — 4.95Gbps (1.65Gbps per graphic channel).
• HDTV Compatible.
• HDCP Compliant.
• DGKat™ Signal Integration — Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
• HDMI Support — x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS–HD.
• 3D Pass–Through.
• EDID PassThru — Passes EDID signals between the source and display.
• Bidirectional RS–232 & IR Interface. — 38400 max baud rate.
• System Range — Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and display used. If using third–party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly.
• Power Connect System™ — A single connection to the transmitter powers both units.
• Compact DigiTOOLS® — 3 units can be rack mounted side–by–side in a 1U rack space with the recommended rack adapter.

The FC-332 is a high-performance format converter for video signals up to 3G HD-SDI. The unit converts the input video format (with embedded audio) to two HDMI outputs.

• HDTV Compatible.
• Looping Input.
• Multi–Standard Operation — SDI (SMPTE 259M), HD–SDI (SMPTE 292M) and 3G HD–SDI (SMPTE 424M) compliance and support for data rates of 270Mbps, 1483.5Mbps, 1485Mbps and 2970Mbps.
• Embedded Audio Group Select Rotary Switch.
• Active Input Indication™ Reporting — Green indicates a standard definition (SDI) input signal and blue indicates a high definition (HD–SDI) input signal.
• Compact DigiTOOLS™ — 3 units can be rack mounted side–by–side in a 1U rack space with the recommended rack adapter.

HDMI (F−F) right−angled gender changer − includes 10 individual adapters.

The VP−439 is a high−performance digital scaler for computer graphics video, composite and HDMI signals, including audio. It up/down scales the selected HDMI, CV or computer graphics video/YPbPr input and outputs it to HDMI on a DVI−I connector.

• Maximum Resolution — Up to 1080p/WUXGA.
• HDTV Compatible.
• HDCP Compliant.
• Auto Switching — Searches for a valid signal when the input signal is lost.
• Automatic Input Audio Detection and Selection — Selects embedded audio for HDMI inputs, or analog audio when DVI is detected.
• Auto–Power Down — If no input signal is detected for 2 to 3 minutes, output is shut down.
• Analog Audio Inputs — For CV, PC and HDMI.
• Lip Sync Delay
• On–Screen Display (OSD) — For easy setup and adjustment, accessible via the front–panel buttons.
• Flexible Control Options — Front panel buttons, OSD (on–screen display), Web page, Ethernet, RS–232.
• Built–in ProcAmp — For convenient adjustment of video parameters, such as brightness, contrast, color, sharpness and hue.
• Non–Volatile Memory — Saves final settings.

RK−4PT−B is a 19−inch rack adapter for mounting 4 Kramer Pico TOOLS™ size devices in a 1U rack space.

PA−50HZ (PA−50Z) is a compact Hi−Z (70V/100V) power amplifier with line−level output, ideal for small to medium−size meeting spaces and classrooms.

• Simple and flexible speaker array installation.
• Line level output for cascading, recording or conferencing scenarios.
• Small form factor and convection cooling for simple installation.
• 50W of power into a 70V or 100V line.

FC−101Net is a compact 2−channel Dante™ decoder with 2 balanced mono audio outputs. It enables connecting non−Dante devices, such as amplifiers and powered speakers, to a Dante network and enables volume control. FC−101Net is powered over Ethernet from any standard PoE providing network switch.

• Dante Network Interface.
• PoE Acceptor.
• Interoperability — Supports AES67 and Dante allowing high–performance interoperability between IP–based audio networking systems.
• Interoperability — Supports AES67 and Dante allowing high–performance interoperability between IP–based audio networking systems.
• Input — 2 Dante channels on an RJ–45 connector.
• Outputs — 2 balanced mono audio on a 3–pin terminal blocks.
• Output Volume Control.
• Versatile Control — Via the Dante IP control matrix and Kramer Protocol 3000 via RS–232 connection.
• Professional, Studio Grade Signal Conversion Technology — Includes the latest generation 32–bit advanced Digital Analog Converter architecture to achieve excellent dynamic performance and improved tolerance to clock jitter. Maintains the quality of the original audio signal with selectable sampling rates up to 96 kHz.