Processors

The SL−1N is a master room controller that can operate over Ethernet (LAN) with control ports that include two bidirectional RS−232, two IR and three relay. It controls devices such as scalers, video displays, audio amplifiers, DVD players, sensors, screens, shades, door locks, and lights. Multiple Kramer Ethernet gateways can be used to add remote I/O ports.

The SL−1N includes a KNET™ connector interface which enables access to the master controller from auxiliary room controllers such as control keypads. The SL−1N can also provide power to auxiliary room controllers via the KNET™ connectors.

• 1 Ethernet Port — Connector for IP–enabled devices and control gateways for adding remote I/O ports
• 1 K–NET™ Connector — Enables communication between the master controller and auxiliary room controllers such as control keypads
• K–NET™ Single Link Connection — Enables a single connection for both power and control to auxiliary controllers
• 2 RS–232 Bi–directional Control Ports — Serial control protocol for compatible devices
• 2 IR Emitter Control Ports — Infrared control for compatible devices
• 3 Relay Control Ports — Contact closure control for actions such as rolling up and down screens, drapes, shades, and blinds
• Simultaneous IP Control Communication — With up to 15 IP control clients.
• Kramer K–Config™ Compatible — Intuitive Windows–based configuration application for fast and easy design of room control systems
• Kramer Site–CTRL™ Compatible — Remote customer site control and management over customer's IP network
• IR Sensor and IR Input Ports — Learn commands from IR remotes
• Mini USB Port — For firmware upgrades of technical services

SL−240C is a compact master/space controller (Kramer Control brain) with PoE. It can operate over Ethernet with control interfaces that include: four bidirectional RS−232, four IR, four GPI/O, and four relays. It controls devices such as scalers, video displays, audio amplifiers, Blu−ray players, sensors, screens, shades, door locks, and lights. Multiple Kramer Ethernet control gateways can be used to add remote I/O ports.

• Space Controller — Controls any AV device/display with its corresponding logic.
• High Performance Architecture — Enables a scalable and flexible programming platform.
• 4 RS–232 Bidirectional Control Ports — For controlling devices via bi–directional serial control protocols.
• 4 IR Emitter & 1 IR Receiver Control Ports — Control devices via IR control protocols and learn commands from IR remotes.
• 4 GPI/O Control Ports — Control devices via general purpose I/O ports, program configured as digital input, digital output or analog input interface for controlling sensors, door locks, audio volume and lighting control devices.
• 4 Relay Control Ports — Control devices via relay contact closure, such as opening and closing drapes, shades, blinds, and projection screen scrolling.
• Resilient powering with PoE and optional PSU (not included).
• Network Support — 10/100/1000Mbps Ethernet.
• LED Indicators — I/O port state and system status.
• Software Management Support — Kramer Control, API.

KC−BRAINware−5 is a hardware platform with 5 instances of Kramer BRAINware software already installed on the device. KC−BRAINware−5 is designed to maximize the features and benefits of Kramer BRAINware for controlling up to 5 standard spaces (e.g. a standard space could include a scaler, monitor, lighting system, touch panel and keypad).

Kramer BRAINware is an enterprise−class, revolutionary, user−friendly, software application that enables you to execute all your room control actions straight from a computer without installing a physical Brain between the user interface and the controlled devices. Using the power of Kramer Control cloud–based control & space management platform, Kramer BRAINware enables you to operate multiple devices over Ethernet such as scalers, video displays, audio amplifiers, Blu−ray players, sensors, screens, shades, door locks, and lights.

Dedicated Presentation Solutions has a Kramer Control certified technician on staff.

Designing a system was never easier, with Kramer Control's programming free, intuitive drag & drop Builder. Install, configure and modify your control system without any prior knowledge in programming.

• Simplified AV Installation — Control up to 5 rooms without installing a physical Brain.
• Scalable to Your Installation — Supports controlling up to 5 standard spaces.
• Format Conversion — Use Kramer FC family of control format converters to enable controlling almost any device.
• Fully Customizable UI — Using Kramer Control, easily personalize your control interface any way you like.
• Space Controller — Controls any AV device with its corresponding logic.
• No Programming Required — Install and start using the platform in minutes with no need for programming.

The SL−10 is a master room controller that can operate over Ethernet (LAN) with control ports that include: bidirectional one RS−485, two RS−232, three IR, two GPI/O, and five relay. It controls devices such as scalers, video displays, audio amplifiers, DVD players, sensors, screens, shades, door locks, and lights. Multiple Kramer Ethernet gateways can be used to add remote I/O ports.

The SL−10 includes a KNET™ connector interface which enables access to the master controller from auxiliary room controllers such as control keypads. The SL−10 can also provide power to auxiliary room controllers via the KNET™ connectors.

• 1 Ethernet Port — Connects to control gateways for I/O port extending, and controls IP–enabled controlled devices.
• 1 K–NET™ Connector — Connects to room control system, either master room controller, or auxiliary control keypads.
• K–NET™ Single Link Connection — Provides a single control system cable–connectivity, carrying both power and control communication.
• 1 RS–485 & 2 RS–232 Bi–directional Control Ports — Controls a device via bi–directional serial control protocols.
• 3 IR Emitter Control Ports — Control devices via IR control protocols.
• 5 Relay Control Ports — Control devices via relay contact closure, such as scrolling up and down screens, drapes, shades, and blinds.
• Simultaneous IP Control Communication — With up to 15 IP control clients.
• Kramer K–Config™ Compatible — Win–based control program easy configuration and upload to room controller over customer IP network.
• Kramer Site–CTRL™ Compatible — Remote customer site control and management over customer IP network.
• IR Sensor and IR Input Ports — Learn commands from IR remotes.
• Mini USB Port — For firmware upgrade technical services.

The SL−12 is a master room controller that can operate over Ethernet (LAN) with control ports that include: one bidirectional RS−485, four RS−232, four IR, four GPI/O, and eight relay. It controls devices such as scalers, video displays, audio amplifiers, DVD players, sensors, screens, shades, door locks, and lights. Multiple Kramer Ethernet gateways can be used to add remote I/O ports.

The SL−12 includes a KNET™ connector interface which enables access to the master controller from auxiliary room controllers such as control keypads. The SL−12 can also provide power to auxiliary room controllers via the KNET™ connectors.

• 1 Ethernet Port — Connects to control gateways for I/O port extending, and controls IP–enabled controlled devices.
• 1 K–NET™ Connector — Connects to room control system, either master room controller, or auxiliary control keypads.
• K–NET™ Single Link Connection — Provides a single control system cable–connectivity, carrying both power and control communication.
• 1 RS–485 & 2 RS–232 Bi–directional Control Ports — Control devices via bi–directional serial control protocols.
• 4 IR Emitter Control Ports — Control devices via IR control protocols.
• 4 GPI/O Control Ports — Control devices via general purpose I/O ports, program–configured as digital input, digital output or analog input interface for controlling sensors, door–locks, audio volume and light dim level, or lighting control devices.
• 8 Relay Control Ports — Control devices via relay contact closure, such as scrolling up and down screens, drapes, shades, and blinds.
• Simultaneous IP Control Communication — With up to 15 IP control clients.
• Kramer K–Config™ Compatible — Win–based control program easy configuration and upload to room controller over customer IP network.
• Kramer Site–CTRL™ Compatible — Remote customer site control and management over customer IP network.
• IR Sensor and IR Input Ports — Learn commands from IR remotes.
• Mini USB Port — For firmware upgrade technical services.