TOA
The RS-150 single button indoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. The 4cm (1.57in) speaker provides clear audio and the single black call button allows for simple call-in operation. The call button can be programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The RS-180 panic vandal resistant single button outdoor call panel substation is ADA compliant and is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a 4cm (1.57in) speaker for clear audio and a single vandal resistant red anodized metal call button, with button bezel, allowing for simple call-in operation. The call button can be programmed to report to any master station based on job specification. Additionally the substation’s front faceplate is made from thick 11 gauge stainless steel stock for added durability and the circuit boards have been weather treated for moisture exposed installations. Visual call-in progress feedback is achieved with a red LED above the call switch. An open collector trigger is provided for local triggering by the call-in button for devices such as a strobe light or other indicator while a call is in progress. The substation requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The RS-170 vandal resistant single button outdoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a 4cm (1.57in) speaker for clear audio and a single vandal resistant metal call button, with button bezel, allowing for simple call-in operation. Additionally the substation’s front faceplate is made from thick 11 gauge stainless steel stock for added durability and the circuit boards have been weather treated for moisture exposed installations. The call button can be programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The N-8000AL is a Telephone interface unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It has a single telephone line interface, allowing an analog telephone to be connected. Connecting the unit to the LAN permits the analog telephone to be operated in the same manner as the intercom master station. It can be mounted in an EIA equipment rack (1U size) with the use of an optional rack mounting bracket or installed on a wall using an optional wall mounting bracket
| Power Source | 120 V AC, 50/60 Hz |
|---|---|
| Power Consumption | 8 W (max.) |
| Telephone Interface | Number of telephone line: 1 line Selective signal type: DTMF signal Monitoring function: Line Loop detection Control function: Caller ID function Wiring method: 1 pair of twisted pair cables Short-circuit current: 120 mA Open voltage: 24 V DC Calling signal output voltage: Max. 80 V (0-p) AC (16 Hz) |
| Network Section | Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation) Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP Audio packet transmission system: Unicast, Multicast Number of paging destinations: Unicast (max. 8), Multicast (max. 191) Connector: RJ45 connector Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software) Quantifying bit number: 16-bit Voice encoding method: Sub-band ADPCM, Cryptosystem Voice packet loss recovery: Silence insertion Audio delay time: 80 ms, 320 ms (controllable on the software) |
| Indication | Network LNK/ACT indication, Status lamp, Power-on indication lamp, Telephone status lamp |
| Other | Firmware update function, System data hold function, Time of day hold facility, Reset switch (front panel) |
| Setting Method | Rack, Desk, Surface mount |
| Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) |
| Operating Humidity | 90 %RH or less (no condensation) |
| Finish | Pre-coated steel plate, black, 30 % gloss |
| Dimensions | 210 (W) × 44.3 (H) × 267 (D) mm (8.27" × 1.74" × 10.51") |
| Weight | 1.7 kg (3.75 lb) |
| Accessory | Power cord (2 m (6.56 ft)) …1, CD (for PC setting, maintenance use) …1, Mini-clamp plug (2 pins) …2, Plastic foot …4, Screw for fitting plastic foot …4 |
| Option | Rack mounting bracket: MB-15B-BK (for rack mounting one N-8000AL unit) MB-15B-J (for rack mounting two N-8000AL units) Wall mounting bracket: YC-850 |
The N-SP80 series SIP Video Intercom System offers flexible audio and video communications using standard SIP and Onvif protocols. It can integrate with external SIP compatible systems through a SIP server. Peer-to-Peer mode is also available for easy system configuration without a SIP server. TOA’s N-8000SG SIP gateway software is fully compatible with TOA’s N-8000 IP intercom system. The N-SP80MS1 can communicate with master and door stations, and control door station contact closure outputs.
| Phone Features | Web support multi-language Auto-answer Volume control Direct IP call without SIP proxy Auto-Provision DTMF modes: Inband, RFC2833, SIP INFO Audio Features: VAD, CNG, AEC, G.165/G.168 |
| Network Features | 2x10/100Mbps Ethernet Port 1xPoE(IEEE803.2af) Security: Password Protection, IP address filtering, SIP over TLS, HTTPS encryption, user access log Protocols support: IPv4, HTTP, HTTPS, FTP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP IP assignment: Static IP, DHCP, PPPoE |
| SIP Features | SIP v1(RFC2543), SIP v2(RFC3261) Audio codecs: G.711a, G.711μ, G.722, G.723, G.729a/b, iLBC, AMR-NB/WB, OPUS Video codecs: H.263, H.264 Speech Quality: 7kHz Audio Echo Cancellation Voice Activation Detection Comfort Noise Generator |
| Others | Android 4.2 Management by LCD Menu Configuration, WebUI Download content from the specified server Information receiving, storing, and rendering capabilities Web browser Contacts and Call records management Support playing local or online video |
| Graphic Display | 7 inch capacitive touch screen TFT LCD, 800x480 pixels , 16:9 wide screen aspect ratio |
| Camera | 2M pixels C-MOS camera, free rotation |
| Resolution | up to 1080p |
| Video Features | QCIF, QVGA, CIF, 4CIF, VGA Video bitrate: 64kbps~2Mbps PIP Full Screen local video ON/OFF control |
| Hands-Free | Microphone and Speaker built-in |
| Hand-set | Connected with a carl-cord |
| External Interface | IEEE802.11 b/g/n, USB 2.0, 3.5mm headset jack, HDMI |
| Power Source | PoE |
| Power Consumption | less than 12W |
| Installation | Desktop |
| Operating Temperature | 0 °C 40 °C (32 °F- 104 °F) |
| Finish | ABS |
| Dimension | 240 (H) x 213 (W) x 120( D)mm (9.44" x 8.39" x 4.72" |
The N-SP80AS1 SIP Audio Door Station is designed to provide clear and intelligible communication to a Multimedia Station over an Ethernet network. It is equipped with an assignable call switch and two control relay outputs.
The N-SP80 series SIP Video Intercom System offers flexible audio and video communications using standard SIP and Onvif protocols. It can integrate with external SIP compatible systems through a SIP server. Peer-to-Peer mode is also available for easy system configuration without a SIP server. TOA’s N-8000SG SIP gateway software is fully compatible with TOA’s N-8000 IP intercom system.
| Phone Features | Web support multi-language Auto-answer Volume control Direct IP call without SIP proxy Auto-Provision |
| Network Features | 2x10/100Mbps Ethernet Port Security: Password Protection, IP address filtering, SIP over TLS, HTTPS encryption,user access log, SRTP (Secure RTP) Protocols support: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP |
| SIP Features | SIP v1(RFC2543), SIP v2(RFC3261) Audio codecs: G.711a, G.711μ, G.722, G.729 Speech Quality: 7kHz Audio Echo Cancellation Voice Activation Detection Comfort Noise Generator |
| Switches | 1 Call button, 1 reset button (on board) |
| Microphone | 1 integrated microphone, IP67 |
| Speaker | 1W, IP66 |
| Control Input | 2 input relays for alarm/ (Voltage, Current) |
| Control Output | 2 output relays for door opener/ (Voltage, Current) |
| Indication | Status lamp (colours: red, green, blue) |
| Power Source | 12V DC |
| IP Grade | IP65 |
| Installation | Flush-mounted, Fit in Clipsal 164/4 back box |
| Operating Temperature | -20 ° ~ 55 °C (-4 °F - 131° F) |
| Finish | Plate: Stainless steel |
| Dimension | 210 (H) x1 20 (W) x 45.6 (D)mm (8.27" x 4.72" x 1.8") |
The YC-831HSW AM is a Surface Mount Backbox for N-SP80AS1 and N-SP80VS1 intercom door stations. It is equipped with a heating element for installation in cold environments and a tamper switch that can be connected to one of the two control inputs of an attached door station to trigger a tamper notification call.
The YC-400 is a 4-gang electrical back box for wall flush mounting of TOA 4-gang size intercom stations such as N-SP80AS1 or N-SP80VS1.
The N-SP80VS1 SIP Video Door Station is designed to provide clear and intelligible communication to a Multimedia Station over an Ethernet network. It is equipped with an assignable call switch, a night-view camera and two control relay outputs.
The N-SP80 series SIP Video Intercom System offers flexible audio and video communications using standard SIP and Onvif protocols. It can integrate with external SIP compatible systems through a SIP server. Peer-to-Peer mode is also available for easy system configuration without a SIP server. TOA’s N-8000SG SIP gateway software is fully compatible with TOA’s N-8000 IP intercom system.
| one Features | Web support multi-language Auto-answer Volume control Direct IP call without SIP proxy Auto-Provision |
| Network Features | 2x10/100Mbps Ethernet Port Security: Password Protection, IP address filtering, SIP over TLS, HTTPS encryption, user access log Protocols support: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP |
| SIP Features | SIP v1(RFC2543), SIP v2(RFC3261) Audio codecs: G.711a, G.711μ, G.722, G.729 Video codecs: H.264 MPEG-4/MJEG (E21V only) Speech Quality: 7kHz Audio Echo Cancellation Voice Activation Detection Comfort Noise Generator |
| Switches | 1 Call button, 1 reset button (on board) |
| Camera | 3M pixels |
| Resolution | up to 1080p |
| Microphone | 1 integrated microphone, IP67 |
| Speaker | 1W, IP66 |
| Control Input | 2 input relays for alarm/ (Voltage, Current) |
| Control Output | 2 output relays for door opener/ (Voltage, Current) |
| Indication | Status lamp (colors: red, green, blue) |
| Power Source | 12V DC |
| Power Consumption | less than 12W |
| IP Grade | IP65 |
| Installation | Flush-mounted, Fit in Clipsal 164/4 back box |
| Operating Temperature | -20 ° ~ 55 °C (-4 °F - 131° F) |
| Finish | Plate: Stainless steel |
| Dimension | 210 (H) x 120 (W )x 45.6 (D)mm (8.27" x 4.72" x 1.8") |
The P-912MK2 Power Amplifier delivers up to 120 watts of output power. The power amplifier has an input port to accept one plug-in module.
Unparalleled DSP mixer ideal for multi-zone paging, music distribution and room-combining applications.
The A-9060DHM2 CU Amplifier is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs. 9000 series modules as well as existing 900 series input modules can be used. The more appropriate modules can be selected depending on applications. Since it comes with two 60W power amplifiers, it can individually perform multi-origin broadcasts. It is equipped with signal processing and control functions necessary for sound reinforcement, permitting all parameters to be set at the mixer. Settings data can be stored inside the unit and called up using the keys on the front panel.
- Modular Digital Matrix Mixer/Amplifiers for a multitude of applications including audio-visual, zone paging, room combining and many more
- Easy to Configure and Operate
- Exceptional Audio Quality
- 24-bit, 48 kHz sampling
- Ultra-Low Distortion - 0.0008%
- Minimum Latency - 1.1ms (D-001T input to output)
- Modular Mixer - up to 8 mic/line inputs and 8 outputs
- Dual Channel Digital Signal Processor (DSP):
- 10-Band Parametric EQ
- High and Low Pass Filters
- Compressor
- Loudness Contour
- Bass and Treble
- Delay (MIXER mode)
- 34 TOA Speaker EQ Presets
- Single or Dual Channel Power Amplifiers 70.7 V, 25 V and low impedance models
- Flexible Output Power - dual channel models allow 50% of either amplifier channel to be allocated to the other channel (Ex. A-9060DHM2: CH1:90W, CH2:30W)
- Telephone Zone Paging - access up to eight zones with optional ZP-001T module
- Flexible, integrated, operating system (Mixer + Paging Matrix)
- Mixer functions along with simultaneous Priority Paging Matrix activation, each with 32 presets
- Scene memory (x32) contains all mixer (non-priority) settings
- Paging memory (x32) contains global (static) input settings, independent Xpoint assignments, paging trigger & paging output levels for all high priority (1, 2 & 3) inputs.
- Both scene & paging memories are stored in a single template along with remote assignments, security lock and other global functions
- Mixer & Paging functions are independent and mixer (scene) settings will not affect Paging (event) functions.
- Rack-mount Kit Included
- Five Year Warranty
Description
The SP-11N is a VoIP phone paging module supported SIP (Session Initiation Protocol) with Auto-answer function. It can be connected to an IP network and directly registered as one SIP phone station on various SIP server management software. It also has VOX and mute functions designed for use with TOA’s 9000M2, 900, 700 and BG-2000 series amplifiers.
Specifications
| Power Source | AC Adaptor AD-1215P or its equivalent |
| Network Interface | RJ-45 connector 10BASE-T / 100BASE-TX, Auto-negotiation |
| Network Protocol | SIP (RFC3261), TCP. UDP, BOOTP, DHCP, RTP SNMP, ICMP, HTTP |
| Audio Format | G.711 u-law / a-law |
| Control Output | 5 channels open collector output (Max. Voltage: 27V DC, Control current: 50mA Max.) Removable terminal block (6 pin) |
| Operating Temperature | -32°F (0°C) to +104°F (+40°C) |
| Finish | Panel: Aluminum, Hairline finish |
| Dimensions | 1.38”(W) x 3.07” (H) x 3.6”(D) |
| Weight | 0.2lb (86g) |
Description
The D-001T is a plug-in module designed for use with the 9000 Series amplifiers and can provide two independent balanced inputs. The D-001T can handle signals ranging from microphone level to line level by controlling their input sensitivity in 9 increments from -60 dB to -10 dB. Phantom power (+24 V) can be supplied for condenser microphone use. The D-001T can process effect for TONE/EQ/COMPRESSOR to two inputs independently.
Specifications
| Power Source | +24 V DC, -24 V DC, +6 V DC |
|---|---|
| Current Consumption | 20 mA (at +24 V DC), 20 mA (at -24 V DC), 60 mA (at +6 V DC) |
| Input | 2 channels, 3 kΩ (when the phantom power is ON)/10 kΩ (when the phantom power is OFF), electronically-balanced, removable terminal block (3 pins) |
| Input Sensitivity | -60, -54, -48, -42, -36, -30, -24, -18, -10 dB* (selectable) |
| Frequency Response | 20 Hz - 20 kHz, +1, -3 dB |
| Total Harmonic Distortion + N | 0.008 % (at 1 kHz, 20 Hz - 20 kHz BPF, Input sensitivity: -10 dB) |
| Input Equivalent Noise | Under -112 dB (at 20 Hz - 20 kHz BPF, Input short, Input sensitivity: -60 dB) |
| S/N Ratio | Over 73 dB (at 20 Hz - 20 kHz BPF, Input short, Input sensitivity: -10 dB) |
| Cross Talk | Over 75 dB (at 20 kHz, Input sensitivity: -10 dB) |
| CMRR | Over 62 dB (at 1 kHz, Input sensitivity: -60 dB) |
| A/D Converter | 24 bit ADC |
| Sampling Frequency | 48 kHz |
| Tone Control | Bass: ±12 dB (at 100 Hz) Treble: %%p12 dB (at 10 kHz) |
| Parametric Equalizer | 10 bands, Frequency: 20 Hz - 20 kHz, 31 points, Variable range: ±12 dB, Q: 0.3 - 5 |
| High-pass Filter | -12 dB/oct, Variable frequency range: 20 Hz - 20 kHz, 31 points |
| Low-pass Filter | -12 dB/oct, Variable frequency range: 20 Hz - 20 kHz, 31 points |
| Compressor | Depth: 1 - 5 |
| Phantom Power | +24 V DC |
| Operating Temperature | -10 ℃ to +40 ℃ |
| Finish | Panel: Aluminum, hair-line |
| Dimensions | 35 (W) × 78 (H) × 91.5 (D) mm |
| Weight | 82 g |
Description
The D-001R is a line input plug-in module designed for use with the 9000 Series amplifiers. It has 2-channel unbalanced inputs of RCA jacks. Input signals to both channels are mixed together. The D-001R can process effect for TONE/EQ/COMPRESSOR to two inputs independently.
Specifications
| Power Source | +24 V DC, -24 V DC, +6 V DC |
|---|---|
| Current Consumption | 20 mA (at +24 V DC), 20 mA (at -24 V DC), 60 mA (at +6 V DC) |
| Input | 2 channels, 2RCA/ch mixed, 10 kΩ, unbalanced, RCA pin jack Input |
| Sensitivity | -60, -54, -48, -42, -36, -30, -24, -18, -10 dB* (selectable) |
| Frequency Response | 20 Hz - 20 kHz, +1, -3 dB |
| Total Harmonic Distortion + N | 0.008 % (at 1 kHz, 20 Hz - 20 kHz BPF, Input sensitivity: -10 dB) |
| S/N Ratio | Over 70 dB (at 20 Hz - 20 kHz BPF, Input short, Input sensitivity: -10 dB) |
| Cross Talk | Over 75 dB (at 20 kHz, Input sensitivity: -10 dB) |
| A/D Converter | 4 bit ADC |
| Sampling Frequency | 48 kHz |
| Tone Control |
|
| Parametric Equalizer | 10 bands, Frequency: 20 Hz - 20 kHz, 31 points, Variable range: ±12 dB,
|
| High-pass Filter | -12 dB/oct, Variable frequency range: 20 Hz - 20 kHz, 31 points |
| Low-pass Filter | -12 dB/oct, Variable frequency range: 20 Hz - 20 kHz, 31 points |
| Compressor | Depth: 1 - 5 |
| Operating Temperature | -10 ℃ to +40 ℃ (14 ゜F to 104 ゜F) |
| Finish | Panel: Aluminum, hair-line |
| Dimensions | 35 (W) × 78 (H) × 91.5 (D) mm (1.38" × 3.07" × 3.6") |
| Weight | 82 g (0.18 lb) |
The U-14R is a plug-in type Input Priority module designed to be used in conjunction with TOA's 900 Series and BG-1000 Series amplifiers. The U-14R is equipped with 2 inputs: BGM and JUKE, and the JUKE input has priority over the BGM input. BGM signals are only output when an input is received. Output automatically switches over to JUKE signal input when JUKE signals are received. Each of BGM and JUKE inputs has both L and R inputs, which are internally mixed and output. The JUKE input is equipped with an AGC, which maintains a uniform output level for varying input signal levels. When the U-14R is used with a 900 Series amplifier, its outputs (both BGM and JUKE) can be turned off using the two MUTE BUS signal channels.