Recently Viewed
TOA
The RS-143 single button call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a single red call button. The call button can be programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US single gang flush or wall mount box. The optional RS-141 handset for private calling, or a 25V/1W speaker such as the PC-580RU for room announcement applications, can be connected to the call panel station.
The RS-144 dual button call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides Emergency (Red) and Normal (white) buttons that can be individually programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US single gang flush or wall mount box. The optional RS-141 handset for private calling, or a 25V/1W speaker such as the PC-580RU for room announcement applications, can be connected to the call panel station
The RS-160 vandal resistant single button indoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a 4cm (1.57in) speaker for clear audio and a single vandal resistant metal call button with button bezel, allowing for simple call-in operation. Additionally the substation’s front faceplate is made from thick 11 gauge stainless steel stock for added durability. The call button can be programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The RS-150 single button indoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. The 4cm (1.57in) speaker provides clear audio and the single black call button allows for simple call-in operation. The call button can be programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The RS-180 panic vandal resistant single button outdoor call panel substation is ADA compliant and is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a 4cm (1.57in) speaker for clear audio and a single vandal resistant red anodized metal call button, with button bezel, allowing for simple call-in operation. The call button can be programmed to report to any master station based on job specification. Additionally the substation’s front faceplate is made from thick 11 gauge stainless steel stock for added durability and the circuit boards have been weather treated for moisture exposed installations. Visual call-in progress feedback is achieved with a red LED above the call switch. An open collector trigger is provided for local triggering by the call-in button for devices such as a strobe light or other indicator while a call is in progress. The substation requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The RS-170 vandal resistant single button outdoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a 4cm (1.57in) speaker for clear audio and a single vandal resistant metal call button, with button bezel, allowing for simple call-in operation. Additionally the substation’s front faceplate is made from thick 11 gauge stainless steel stock for added durability and the circuit boards have been weather treated for moisture exposed installations. The call button can be programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The YC-400 is a 4-gang electrical back box for wall flush mounting of TOA 4-gang size intercom stations such as N-SP80AS1 or N-SP80VS1.
The YC-831HSW AM is a Surface Mount Backbox for N-SP80AS1 and N-SP80VS1 intercom door stations. It is equipped with a heating element for installation in cold environments and a tamper switch that can be connected to one of the two control inputs of an attached door station to trigger a tamper notification call.
The N-SP80 series SIP Video Intercom System offers flexible audio and video communications using standard SIP and Onvif protocols. It can integrate with external SIP compatible systems through a SIP server. Peer-to-Peer mode is also available for easy system configuration without a SIP server. TOA’s N-8000SG SIP gateway software is fully compatible with TOA’s N-8000 IP intercom system. The N-SP80MS1 can communicate with master and door stations, and control door station contact closure outputs.
| Phone Features | Web support multi-language Auto-answer Volume control Direct IP call without SIP proxy Auto-Provision DTMF modes: Inband, RFC2833, SIP INFO Audio Features: VAD, CNG, AEC, G.165/G.168 |
| Network Features | 2x10/100Mbps Ethernet Port 1xPoE(IEEE803.2af) Security: Password Protection, IP address filtering, SIP over TLS, HTTPS encryption, user access log Protocols support: IPv4, HTTP, HTTPS, FTP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP IP assignment: Static IP, DHCP, PPPoE |
| SIP Features | SIP v1(RFC2543), SIP v2(RFC3261) Audio codecs: G.711a, G.711μ, G.722, G.723, G.729a/b, iLBC, AMR-NB/WB, OPUS Video codecs: H.263, H.264 Speech Quality: 7kHz Audio Echo Cancellation Voice Activation Detection Comfort Noise Generator |
| Others | Android 4.2 Management by LCD Menu Configuration, WebUI Download content from the specified server Information receiving, storing, and rendering capabilities Web browser Contacts and Call records management Support playing local or online video |
| Graphic Display | 7 inch capacitive touch screen TFT LCD, 800x480 pixels , 16:9 wide screen aspect ratio |
| Camera | 2M pixels C-MOS camera, free rotation |
| Resolution | up to 1080p |
| Video Features | QCIF, QVGA, CIF, 4CIF, VGA Video bitrate: 64kbps~2Mbps PIP Full Screen local video ON/OFF control |
| Hands-Free | Microphone and Speaker built-in |
| Hand-set | Connected with a carl-cord |
| External Interface | IEEE802.11 b/g/n, USB 2.0, 3.5mm headset jack, HDMI |
| Power Source | PoE |
| Power Consumption | less than 12W |
| Installation | Desktop |
| Operating Temperature | 0 °C 40 °C (32 °F- 104 °F) |
| Finish | ABS |
| Dimension | 240 (H) x 213 (W) x 120( D)mm (9.44" x 8.39" x 4.72" |
The N-SP80AS1 SIP Audio Door Station is designed to provide clear and intelligible communication to a Multimedia Station over an Ethernet network. It is equipped with an assignable call switch and two control relay outputs.
The N-SP80 series SIP Video Intercom System offers flexible audio and video communications using standard SIP and Onvif protocols. It can integrate with external SIP compatible systems through a SIP server. Peer-to-Peer mode is also available for easy system configuration without a SIP server. TOA’s N-8000SG SIP gateway software is fully compatible with TOA’s N-8000 IP intercom system.
| Phone Features | Web support multi-language Auto-answer Volume control Direct IP call without SIP proxy Auto-Provision |
| Network Features | 2x10/100Mbps Ethernet Port Security: Password Protection, IP address filtering, SIP over TLS, HTTPS encryption,user access log, SRTP (Secure RTP) Protocols support: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP |
| SIP Features | SIP v1(RFC2543), SIP v2(RFC3261) Audio codecs: G.711a, G.711μ, G.722, G.729 Speech Quality: 7kHz Audio Echo Cancellation Voice Activation Detection Comfort Noise Generator |
| Switches | 1 Call button, 1 reset button (on board) |
| Microphone | 1 integrated microphone, IP67 |
| Speaker | 1W, IP66 |
| Control Input | 2 input relays for alarm/ (Voltage, Current) |
| Control Output | 2 output relays for door opener/ (Voltage, Current) |
| Indication | Status lamp (colours: red, green, blue) |
| Power Source | 12V DC |
| IP Grade | IP65 |
| Installation | Flush-mounted, Fit in Clipsal 164/4 back box |
| Operating Temperature | -20 ° ~ 55 °C (-4 °F - 131° F) |
| Finish | Plate: Stainless steel |
| Dimension | 210 (H) x1 20 (W) x 45.6 (D)mm (8.27" x 4.72" x 1.8") |
The N-SP80VS1 SIP Video Door Station is designed to provide clear and intelligible communication to a Multimedia Station over an Ethernet network. It is equipped with an assignable call switch, a night-view camera and two control relay outputs.
The N-SP80 series SIP Video Intercom System offers flexible audio and video communications using standard SIP and Onvif protocols. It can integrate with external SIP compatible systems through a SIP server. Peer-to-Peer mode is also available for easy system configuration without a SIP server. TOA’s N-8000SG SIP gateway software is fully compatible with TOA’s N-8000 IP intercom system.
| one Features | Web support multi-language Auto-answer Volume control Direct IP call without SIP proxy Auto-Provision |
| Network Features | 2x10/100Mbps Ethernet Port Security: Password Protection, IP address filtering, SIP over TLS, HTTPS encryption, user access log Protocols support: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP |
| SIP Features | SIP v1(RFC2543), SIP v2(RFC3261) Audio codecs: G.711a, G.711μ, G.722, G.729 Video codecs: H.264 MPEG-4/MJEG (E21V only) Speech Quality: 7kHz Audio Echo Cancellation Voice Activation Detection Comfort Noise Generator |
| Switches | 1 Call button, 1 reset button (on board) |
| Camera | 3M pixels |
| Resolution | up to 1080p |
| Microphone | 1 integrated microphone, IP67 |
| Speaker | 1W, IP66 |
| Control Input | 2 input relays for alarm/ (Voltage, Current) |
| Control Output | 2 output relays for door opener/ (Voltage, Current) |
| Indication | Status lamp (colors: red, green, blue) |
| Power Source | 12V DC |
| Power Consumption | less than 12W |
| IP Grade | IP65 |
| Installation | Flush-mounted, Fit in Clipsal 164/4 back box |
| Operating Temperature | -20 ° ~ 55 °C (-4 °F - 131° F) |
| Finish | Plate: Stainless steel |
| Dimension | 210 (H) x 120 (W )x 45.6 (D)mm (8.27" x 4.72" x 1.8") |
The A-5006 is a half-rack 1-unit size, 60 W, desktop mixer power amplifier. Inputs 1 and 2 can be set for either MIC or LINE sound sources, and its output is compatible with both high-impedance (100V and 70V lines) and low-impedance (4 Ω) speaker connections.
Functions can be set with a PC using the dedicated setting software. The A-5006 is ideal for use as a power amplifier in a small commercial facility and conference room. With the use of an optional rack mounting bracket, it can be mounted in an EIA Standard equipment rack (1 unit size).
With the use of an optional rack mounting bracket, it can be mounted in an EIA Standard equipment rack (1 unit size).
TOA recognizes that background music plays an important part of your business and therefore quality and reliability must also match performance, design and style. The TOA A-5000 series offers the ability to control your music just the way you want it, with built in digital signal processors (DSP) that boast high efficiency and durability. Digital amplification for long-term use. Precise EQ settings via PC for optimal performance and security.
WP-700-AM: Remote Control Panel is a remote control switch/volume panel designed to be used with the MA-725F or MM-700F amplifiers. Provides remote select input source and adjusts volume levels through an Ethernet cable. It can be mounted in a 1-gang electrical box.
The U-14R is a plug-in type Input Priority module designed to be used in conjunction with TOA's 900 Series and BG-1000 Series amplifiers. The U-14R is equipped with 2 inputs: BGM and JUKE, and the JUKE input has priority over the BGM input. BGM signals are only output when an input is received. Output automatically switches over to JUKE signal input when JUKE signals are received. Each of BGM and JUKE inputs has both L and R inputs, which are internally mixed and output. The JUKE input is equipped with an AGC, which maintains a uniform output level for varying input signal levels. When the U-14R is used with a 900 Series amplifier, its outputs (both BGM and JUKE) can be turned off using the two MUTE BUS signal channels.