Kramer

Due to its design, USB cable has a normal maximum length of about 5 meters (16.4 feet), but you can get longer distances by using the CA−UAM/UAF active USB extension cable from Kramer!

This is a bus−powered extension cable that can be used to increase the length of a device without any signal loss or potential performance problems. It contains active electronics, which boost the USB signal for maximum reliability and performance over extended distances. The cable operates as a self−powered extender, for use with USB cameras‚ printers‚ webcams‚ keyboard/mouse, etc.

• True Plug–and–Play — No additional drivers needed.
• USB 2.0 High Speed (480Mbps) Standard.
• Construction — 1 pair 24AWG + 2 pair 22AWG + drain wire 24AWG, tinned copper braid.
• No External Power — Pulls power from source.
• Data Transfer Only — Not for charging.
• Buffers Incoming & Outgoing Signal.
• Compliant with USB 2.0.
• CM–c(ETL) Rated.

Kramer’s C−UA/LTN cable is a MFi certified USB 2.0 cable to connect and charge your iPhone®, iPad® or iPod® with a Lightning™ connector.The cable can be used to connect to your computer's USB port for syncing and charging or to a USB power adapter for reliable charging from a wall outlet. The Lightning connector fits in either direction to enable easier connection of your Apple devices.

• Quality Performance — For reliable syncing and charging, Kramer’s C–UA/LTN cable is built using high–quality materials with durable construction for maximum flexibility.
• Compatible Devices — iPhone 6, 6 Plus, 5, 5C and 5S; the iPod Nano, the iPod Touch, the iPad Mini, the iPad Air and the 4th generation iPad.
• Available Colors — White & black.
• MFi Certified.

The Galil 6−AW on−wall outdoor speaker features a multi−tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings, which are suitable for an array installation. Suitable for outdoor installations and applications. Available in white or black.

The Tavor 6−O is a pair of 6.5−inch powered two−way speakers designed for indoor wall mounting. The active speaker accepts a line−level stereo input and amplifies it using a built−in amplifier and outputs a speaker signal to the passive speaker.

• Active Loudspeaker — Stereo 2x50W RMS, 2x140W continuous program built–in power amplifier.
• Inputs — 1 unbalanced RCA, 1 unbalanced 3.5mm mini jack, 1 balanced on terminal block.
• Audio Level Controls — Volume, treble and bass.
• Magnetically Shielded.
• Enhanced Bass Reflex.
• Auto Power — Shuts off when system is not in use, indicated by a LED.
• Automatic Input Voltage Selector — 90 to 240V AC, 50 to 60Hz.
• Indoor Wall Mounting.
• Mounting Configuration — Active speaker: left, passive speaker: right.
• Weight (Single Speaker) — Active speaker 3.6kg (7.92lbs) approx., passive speaker 2.7kg (5.94lbs) approx.
• Package — 2 speakers (1 pair); 1 pair of U–shaped rotating mounting brackets with 4 mounting knobs; 4m (13.12ft) power cord; 4m (13.12ft) loudspeaker cable; 2m (6.6ft) 3.5mm to 2 RCA cable.

Dual Ethernet Wall Plate Insert

• Front Panel Connections — 2 RJ–45 CAT6.
• Rear Panel Connections — 2 RJ–45 CAT6.
• Standards Compliance — Permanent Link/Channel of TIA/EIA–568–B.2 Cat.6, ISO/IEC 11801, Cenelec EN 50173, IEC 60603–7, PoEP in accordance with IEEE 802.3at.

The WP−571 is a PoC DGKat™ wall plate transmitter for HDMI signals. The WP−571 converts an HDMI signal to a DGKat™ twisted pair signal that it transmits to a WP−572.

• Max. Data Rate — 4.95Gbps (1.65Gbps per graphic channel).
• HDTV Compatible.
• HDCP Compliant.
• DGKat™ Signal Integration — Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
• HDMI Support — HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS–HD.
• 3D Pass–Through.
• System Range — Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables.
  Note: Transmission range depends on the signal resolution, graphics card and display used. If using third–party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly.
• EDID PassThru — Passes EDID signals between the source and display.
• Active Power Indication — The ON LED lights red when receiving power only, orange when either input or output and power are attached, and green when both an active input and output are attached.
• Power Connect™ System — A single connection to the transmitter or the receiver powers the system when the devices are within 90m (295ft) of each other.

HDMI Wall Plate Insert

• Front Panel Connections — HDMI (F).
• Rear Panel Connections — HDMI cable (F).
• Size — Single slot wall plate insert.

Kramer's C−UNIKAT cable is a unified CAT6a cable that handles all the latest technology signals. Over four individually screened twisted pairs, this U/FTP CAT6a cable runs Kramer’s DGKat™ technology, 4K HDBaseT™ technology or LAN applications and ensures optimum signal performance.

• Quality Construction — 4 shielded twisted pairs (U/FTP) of 23AWG solid copper conductors are cabled together in an unshielded outer jacket.
• Optimized for Kramer Hardware — Use with any of Kramer’s wide range of twisted pair digital transmitter–receiver sets (DGKat™ and HDBaseT).
• High–Quality Shielded RJ–45 Connectors — 50u gold plated contacts.

VS−21TS is a high−performance selector for Ethernet and HDBaseT CAT lines. The user selected input CAT line, either Ethernet or HDBaseT, is connected to the output CAT line with its carried signal and power.

• Easy Input Selection — Click–to–connect manual selection using either panel or remote buttons.
• Reliable PoE (Power over Ethernet) Powering — Selected line remote powering is switched to input line, to provide power to its connected device.
• Easy Installation — Compact DigiTOOLS® fan–less enclosure for desktop or under–table mounting, or side–by–side mounting of 3 units in a 1U rack space with the recommended rack adapter.

The WP−572 is a PoC DGKat™ twisted pair receiver for HDMI signals. The WP−571 converts an HDMI signal to a single twisted pair signal and the WP−572 converts the twisted pair signal back to an HDMI signal.

• Max. Data Rate — 4.95Gbps (1.65Gbps per graphic channel).
• HDTV Compatible.
• HDCP Compliant.
• DGKat™ Signal Integration — Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
• HDMI Support — x.v.Color™, up to 7.1 Uncompressed Audio Channels.
• 3D Pass–Through.
• System Range — Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and display used. If using third–party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly.
• EDID PassThru — Passes EDID signals between the source and display.
• ON LED — Lights red when receiving power only, orange when either input or output and power are attached, and green when both an active input and output are attached.
• Power Connect™ System — A single connection to the transmitter powers the receiver.
• Dimensions — 3.3cm x 3.6cm x 10.4cm (1.3" x 1.42" x 4.1") W, D, H.
• Wall Plate Size — 1 gang US.

Kramer's C−USB/C cables connect USB−C enabled devices with standard USB−A, B and Micro B devices (laptops, hard drives, legacy printers, hubs, smartphones, tablets and cameras). C−USB/C cables offer a whole new level of connectivity to devices using the new USB Type−C connector.The symmetrical, low profile USB Type−C connector can be plugged in any direction, eliminating the frustration of getting the port insertion just right.

• Quality Construction — High–quality shielded twisted pair (STP) construction, helps to prevent electromagnetic interference and ensures reliable data communication.
• Reversible USB Type–C Connector.
• Max. Data Rate — 480Mbps.
• Current Rating — 3A and 5A.
• PC, Mac & Mobile Compatible.
• Plug and Play — For printers, scanners, keyboards and other digital devices.
  
• Backward Compatibility — USB specifications 1.0 and 1.1.
• Molded Strain Relief — On the USB A, B & Micro B ends.

WXA−H1/US is a passive wall plate that includes the following inputs: 15−pin HD, 3.5mm Audio, & HDMI.

• Front Panel Connections — 15–pin HD (F), HDMI (F) and 3.5mm (F).
• Rear Panel Connections — 15–pin HD (F), HDMI (F) and 3.5mm (F).
• EDID PassThru — Passes EDID signals from source to display.
• Size — Available in 1 gang US only.
• Keystone connectors (no pigtail).

Kramer's C−USB/C cables connect USB−C enabled devices with standard USB−A, B and Micro B devices (laptops, hard drives, legacy printers, hubs, smartphones, tablets and cameras). C−USB/C cables offer a whole new level of connectivity to devices using the new USB Type−C connector.The symmetrical, low profile USB Type−C connector can be plugged in any direction, eliminating the frustration of getting the port insertion just right.

• Quality Construction — High–quality shielded twisted pair (STP) construction, helps to prevent electromagnetic interference and ensures reliable data communication.
• Reversible USB Type–C Connector.
• Max. Data Rate — 480Mbps.
• Current Rating — 3A and 5A.
• PC, Mac & Mobile Compatible.
• Plug and Play — For printers, scanners, keyboards and other digital devices.
  
• Backward Compatibility — USB specifications 1.0 and 1.1.
• Molded Strain Relief — On the USB A, B & Micro B ends.

Kramer's C−D9M/D9F control cables are for RS−232 applications to control devices within a professional AV system. Many Kramer products are RS−232 controllable and equipped with 9−pin D connector. This RS−232 cable helps to connect them safely to transmit the RS−232 serial commands to a touch−screen system, PC, or other serial controller equipped with 9−pin D connector.

• Quality Construction — Constructed using three 28AWG isolated conductors, terminated with male to female molded 9–pin D–sub connectors, nickel plated.
• Pinout — Wired pin to pin on pins 2, 3 & 5.
• Molded Strain Relief.
• RoHS Compliant.

Kramer's C−D9F/OPEN control cables are for RS−232 applications to control devices within a professional AV system. Many Kramer products are RS−232 controllable and equipped with terminal block connector. This RS−232 cable helps to connect them safely to transmit the RS−232 serial commands to a touch−screen system, PC, or other serial controller equipped with D9 connector.

• Quality Construction — Constructed using three 28AWG isolated conductors, terminated with a molded female 9–pin D–sub connector, nickel plated on one side and open end, non–terminated, on the second side.
• Pinout — Wired pin to pin on pins 2, 3 & 5.
• Molded Strain Relief.
• Stripped & Tinned Wires — At open end.
• RoHS Compliant.

Kramer's C−A63M/XLM is a shielded twisted pair pro audio cable with a 1/4" TRS male plug at one end and an XLR male connector at the other end. This cable is engineered to provide all the clarity and power you need and is built for years of rugged use.

• Quality Construction — 26AWG tinned copper covered by a spiral tinned copper shield to protect signal quality with superior coverage.
• PVC Jacket — Heavy–duty PVC jacket covered with cotton braid for a nice feel, terminated with high–quality assembly type connectors.

Kramer's C−MDM/MDM flexible DVI cables are high−performance cables with molded DVI−D connectors at both ends. These single link cables, designed to carry digital−only signals (18+1 pin), support signals up to 1920x1200 @60Hz and 1080p with 12−bit deep color. These cables are ideal for any installation or rack building that requires flexible cables.

• Quality Construction — Tinned copper 30AWG conductors, triple shielded and flexible PVC jacket, terminated with molded DVI–D connectors.
• HDCP Compliant.
• Fiber Optic Options — Also see Kramer’s DVI–over–fiber products for transmission distances up to 500m (1640ft).
• Unique Thin & Flexible Cable — Ideal for use with Kramer TBUS products and rack building.

Kramer's C−USB/AAE is a high−speed USB 2.0 type−A male to type−A female cable used to extend the connection of computers and peripheral devices such as, printers, scanners, cameras, keyboards, mice and other digital devices for superior signal transfer of up to 480Mbps.

• USB Type–A Male to Type–A Female.
• Transfer Rates up to 480Mbps.
• Foil & Overall Braid Provide Maximum Protection Against EMI/RFI.
• Molded Strain Relief.
• Compatible with USB Specifications 1.0 and 1.1.
• RoHS Compliant.