Kramer

The VP−200K is a distribution amplifier for computer graphics signals up to and exceeding UXGA. The unit takes one input, provides correct buffering and isolation, and distributes the signal to two identical outputs.

• High Bandwidth — 400MHz (–3dB).
• HDTV Compatible.
• ID Bit Control.
• Kr–isp® Advanced Sync Processing — Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr–isp® advanced sync processing can be enabled or disabled.
• EDID PassThru — Passes EDID signal from display to source via output 1.
• Selectable Sync Input Impedance — 75Ω (video), 510Ω (Graphics/TTL).
• DC Coupling.
• 3ft 15–pin HD Cable Included.

The VP-200AK is a high-performance distribution amplifier for computer graphics video signals, with resolutions up to and exceeding UXGA, and unbalanced stereo audio. It takes a computer graphics video and stereo audio input and outputs two computer graphics video, two balanced, and two unbalanced stereo audio signals.

• High Bandwidth — 510MHz (–3dB).
• HDTV Compatible.
• Audio Outputs — Simultaneous balanced and unbalanced stereo.
• EQ (Peaking Control) Audio Level (Gain) Controls.
• Kr–isp® Advanced Sync Processing — Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr–isp® advanced sync processing can be enabled or disabled via internal switches.
• ID Bit Control.

The VM-50AN is a high-performance distribution amplifier for balanced and unbalanced stereo audio signals. It takes one balanced or unbalanced stereo input and distributes the signal simultaneously to ten stereo outputs (five balanced and five unbalanced).

• Balanced/Unbalanced Input Selection.
• S/N Ratio — 84dB (unweighted).
• Level (Gain) Controls.
• Desktop Size — Compact size. 2 units can be rack mounted side–by–side in a 1U rack space with the recommended rack adapter.

The VM-3VN is a distribution amplifier for composite video signals. The unit takes one input, provides correct buffering and isolation and distributes the signal to three identical outputs.

• High Bandwidth — 430MHz (–3dB).
• Selectable Input Signal Termination.
• Level (Gain) & EQ (Peaking) Controls.

The VM-3AN is a high-performance distribution amplifier for balanced stereo audio signals. The unit takes one stereo input and distributes the signal to three identical outputs.

The VA-14 is a high-performance 4-channel mixer for balanced mono audio signals on XLR connectors. The unit inputs four channels of any combination of balanced mic or line level audio signals and outputs two mixed balanced audio and one headphone signal.

• S/N Ratio — Mic in, phones out: 45.3dB; line in, phones out: 83.3dB; line in, line out: 84.3dB; mic in, line out: 64dB.
• Level (Gain) Control — Individual for each input & master and headphone output.
• Phantom Power — 48V DC on each input (individually selectable).
• Desktop Size — Compact size. 2 units can be rack mounted side–by–side in a 1U rack space with the recommended rack adapter.

The TP-104HD is a twisted pair transmitter for computer graphics video and HDTV signals. It converts a computer graphics video or HDTV signal on a 15-pin HD connector to four identical twisted pair signals.

• HDTV Compatible.
• Max. Resolution — WUXGA & 1080p.
• Power Connect™ System — A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other.
• Cable — UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
• System Range — Up to 100m (320ft).
• Compact Kramer TOOLS™ — 3 units can be rack mounted side–by–side in a 1U rack space with the recommended rack adapter.