Kramer

WP−871xr is a high−performance, long−reach DGKat™ 2.0 wall−plate transmitter for 4K@60Hz (4:4:4) HDR HDMI and HDCP 2.2 signals and power over twisted pair. It converts the HDMI input signal into a DGKat™ 2.0 signal and transmits it to a compatible receiver. WP−871xr extends the signal to up to 60m (200ft) at 4K@60Hz (4:4:4) resolution and up to 70m (230ft) at 4K@30Hz (4:4:4) 24bpp resolution over Kramer shielded cables. This wall−plate is powered through PoC (Power over Copper) over the twisted pair cable.

• High Performance Transmitter — Professional DGKat™ 2.0 transmitter for providing long–reach signals over twisted pair copper infrastructures. WP–871xr transmitter employs high–level video compression technology that delivers visually lossless performance for 4K@60Hz (4:4:4) HDR signals with near–zero latency. It converts the HDMI input signal into a DGKat™ 2.0 signal and transmits it to a compatible receiver.
• HDMI Signal Extension — HDR, HDCP 2.2 compliant. Supports deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS–HD, 2K, 4K, and 3D as specified in HDMI 2.0.
• EDID Pass–through — Pass–through algorithm ensures Plug and Play operation for HDMI source and display systems.
• Multi–channel Audio Extension — Up to 32 channels of digital stereo uncompressed signals for supporting studio–grade surround sound.
• Cost–Effective Maintenance — Power and connectivity status LED indicator facilitates easy local maintenance and troubleshooting.
• Easy Installation — Compactly fits into standard US, EU and UK 1–gang in–wall box size, supporting decorative integration with room deployed user interfaces such as electrical switches. Wall–plate installation is fast and cost–effective via a single twisted pair cable, providing both video signal and power (PoC) connections.

The VP−445 is a high−performance presentation scaler/switcher for HDMI, computer graphics and composite video signals. The unit scales the video and gives you an option to embed HDMI or analog audio. Then it sends the signal to two HDMI outputs and S/PDIF and balanced stereo audio outputs simultaneously.

• Max. Resolutions — Up to UXGA/1080p.
• HDTV Compatibility.
• PixPerfect™ Scaling Technology — Kramer’s precision pixel mapping and high–quality scaling technology. High–quality 3:2 and 2:2 pull–down de–interlacing and full up — and down–scaling of all video input signals.
• 12 Video Inputs — 6 HDMI on HDMI connectors, 4 computer graphics video on 15–pin HD connectors and 2 composite video on RCA connectors.
• Two HDMI Scaled Outputs (Mirrored).
• 2 Microphone Inputs — For mixing, switching or talk–over.
• Companion AFV (Audio–Follow–Video) — Stereo audio for every input (on terminal blocks).
• Audio Inputs — 12 unbalanced stereo inputs on terminal blocks, embedded audio for the HDMI inputs, each with individual level controls.
• Audio Outputs — 1 S/PDIF on an RCA connector, one balanced stereo audio on a terminal block and embedded audio on the HDMI outputs.
• Powerful Audio Features — Via DSP technology including audio equalization, mixing, delay and so on.
• Multiple Aspect Ratio Selections — Full, best fit, over scan, under scan, letter box and pan scan.
• Built–in ProcAmp — Color, hue, sharpness, noise, contrast and brightness.
• Color Sampling Support — 4:4:4 (RGB and YUV) and 4:4:2 (YUV).
• Constant Output Sync — No disruption on the output while switching between inputs and when no video is detected.
• Front Panel Control — Audio mute and freeze frame.
• Front Panel Lockout.
• Non–Volatile Memory — Saves final settings.
• Various Control Options — Front panel buttons, RS–232, IR remote, OSD, Ethernet Web pages, Ethernet using UDP.
• Universal Power Supply — 100–240V AC

The 905xl is a high−performance remote−controllable power amplifier.

• Stereo Mode — 2 x 110W @4Ω.
• Selectable Balanced and Unbalanced Inputs.
• Remote Control (RS–232) — Volume, EQ and input selection.
• Class D Amplifier.

VS−21T is a high−performance selector for Ethernet and HDBaseT CAT lines. The user selected input CAT line, either Ethernet or HDBaseT, is connected to the output CAT line with its carried signal.

• Easy Input Selection — Click–to–connect manual selection using either panel or remote buttons.
• Easy Installation — Compact DigiTOOLS® fan–less enclosure for desktop or under–table mounting, or side–by–side mounting of 3 units in a 1U rack space with the recommended rack adapter.

The VP−774AMP is a high−performance presentation switcher and scaler. It accepts one of nine inputs: one DisplayPort (DP), one composite video, two computer graphics, one 3G HD−SDI and four HDMI signals. It scales the video, embeds the audio, and simultaneously outputs the signal to two identical HDMI, one HDBaseT and one 3G HD−SDI output, together with S/PDIF and balanced stereo audio outputs. The unit also includes an audio amplifier and speaker outputs.

• K–IIT XL™ Picture–in–Picture Image Insertion Technology — Ultra–stable picture–in–picture, picture–and–picture, and split screen capability. Any video source can be inserted into or positioned next to any other video source with full window positioning and sizing controls.
• Kramer’s PixPerfect™ Scaling Technology — Kramer’s precision pixel mapping and high quality scaling technology. High–quality 3:2 and 2:2 pull down de–interlacing and full up — and down–scaling of all video input signals.
• State–of–the–Art Video Processing Technology — For highest quality de–interlacing, noise reduction, and scaling performance for both standard–definition and high–definition signals.
• Ultra–Fast Fade–Thru–Black (FTB™) Switching — Video switching transitions are clean and ultra fast. The video fades to black and the new input fades from black for smooth, glitch–free switching. The output signal provides constant sync so the display never glitches.
• HDCP Compliant — The HDCP (High Definition Content Protection) license agreement allows copy–protected data on the HDMI input to pass only to the HDMI output.
• Advanced EDID Management — Per input; analyzes the EDID of a selectable Master connection to one of the outputs.
• Mass Notification Emergency Communication System (MNEC) — Activates a national or campus–wide notification, immediately displayed when an emergency situation develops. It uses automatic text overlaying, either via a crawler or a full screen cover up, as well as an optional audio alert.
• Max. Data Rate — 6.75Gbps (2.25Gpbs per graphic channel).
• Multi–Standard SDI Support — SDI (SMPTE 259M), HD–SDI (SMPTE 292M) and 3G HD–SDI (SMPTE 424M).
• Scaled Outputs — 2 HDMI, 1 HDBaseT, 1 3G HD–SDI (all outputs work simultaneously).
• Output Resolutions — HDTV and computer graphics up to 2K and 1080p/UXGA with selectable refresh rates.
• HDMI Deep Color Support — For all inputs and outputs.
• Luma Keying — Via PIP window.
• Vertical Keystone Operation.
• Built–in Proc–Amp — With enhanced functions such as color correction, gamma and dither.
• Multi–Standard Video Support — NTSC (3.58/4.43), PAL (M/N/60) and SECAM with advanced de–interlacing options.
• Built–in Time Base Corrector — Stabilizes unstable video sources.
• Picture Zooming — Both on main and PIP window from 100% to 1600%, including separate V and H sharpness control.
• Input and Output Colorspace Control.
• Audio Support — Unbalanced stereo audio inputs, with two microphone inputs; digital stereo and balanced stereo outputs; input and output audio level adjustment.
• Selectable Microphone Talkover or Mix Modes.
• Microphone Inputs — 2 dynamic or condenser (with 48V phantom voltage).
• Audio Amplifier & Speaker Output — 2x10W.
• Automatic Detection and Selection of Embedded Audio — Automatically outputs the signal from the HDMI and DP embedded audio inputs or performs an analog takeover to output the respective analog audio input.
• Range — Up to 130m (430ft) normal mode; up to 180m (590ft) ultra mode (1080p @60Hz @24bpp) when using BC–HDKat6a cables.
• On–Screen Display (OSD) — For easy setup and adjustment, accessible via the IR remote control and via the front–panel buttons.
• Built–in Web Page Server.
• Non–Volatile Memory — Saves final settings.
• Firmware Upgrades — Via Ethernet and RS–232.
• Flexible Control Options — Front panel buttons, OSD (on–screen display) via front panel buttons or IR remote (remote control included), embedded Web server.
• Port Tunneling — A bidirectional RS–232 interface where simple control commands and data can flow in both directions from a controller to the VP–773 via the Ethernet, allowing status requests and control of the destination unit
• Selectable Power Save Modes — For efficient energy use.
• Worldwide Power Supply — 100–240V AC.
• Standard 19" Rack Mount Size — 1U. Rack ears included.

The Galil 6−AW on−wall outdoor speaker features a multi−tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings, which are suitable for an array installation. Suitable for outdoor installations and applications. Available in white or black.

The Tavor 6−O is a pair of 6.5−inch powered two−way speakers designed for indoor wall mounting. The active speaker accepts a line−level stereo input and amplifies it using a built−in amplifier and outputs a speaker signal to the passive speaker.

• Active Loudspeaker — Stereo 2x50W RMS, 2x140W continuous program built–in power amplifier.
• Inputs — 1 unbalanced RCA, 1 unbalanced 3.5mm mini jack, 1 balanced on terminal block.
• Audio Level Controls — Volume, treble and bass.
• Magnetically Shielded.
• Enhanced Bass Reflex.
• Auto Power — Shuts off when system is not in use, indicated by a LED.
• Automatic Input Voltage Selector — 90 to 240V AC, 50 to 60Hz.
• Indoor Wall Mounting.
• Mounting Configuration — Active speaker: left, passive speaker: right.
• Weight (Single Speaker) — Active speaker 3.6kg (7.92lbs) approx., passive speaker 2.7kg (5.94lbs) approx.
• Package — 2 speakers (1 pair); 1 pair of U–shaped rotating mounting brackets with 4 mounting knobs; 4m (13.12ft) power cord; 4m (13.12ft) loudspeaker cable; 2m (6.6ft) 3.5mm to 2 RCA cable.

The WP−571 is a PoC DGKat™ wall plate transmitter for HDMI signals. The WP−571 converts an HDMI signal to a DGKat™ twisted pair signal that it transmits to a WP−572.

• Max. Data Rate — 4.95Gbps (1.65Gbps per graphic channel).
• HDTV Compatible.
• HDCP Compliant.
• DGKat™ Signal Integration — Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
• HDMI Support — HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS–HD.
• 3D Pass–Through.
• System Range — Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables.
  Note: Transmission range depends on the signal resolution, graphics card and display used. If using third–party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly.
• EDID PassThru — Passes EDID signals between the source and display.
• Active Power Indication — The ON LED lights red when receiving power only, orange when either input or output and power are attached, and green when both an active input and output are attached.
• Power Connect™ System — A single connection to the transmitter or the receiver powers the system when the devices are within 90m (295ft) of each other.

Kramer's C−UNIKAT cable is a unified CAT6a cable that handles all the latest technology signals. Over four individually screened twisted pairs, this U/FTP CAT6a cable runs Kramer’s DGKat™ technology, 4K HDBaseT™ technology or LAN applications and ensures optimum signal performance.

• Quality Construction — 4 shielded twisted pairs (U/FTP) of 23AWG solid copper conductors are cabled together in an unshielded outer jacket.
• Optimized for Kramer Hardware — Use with any of Kramer’s wide range of twisted pair digital transmitter–receiver sets (DGKat™ and HDBaseT).
• High–Quality Shielded RJ–45 Connectors — 50u gold plated contacts.

VS−21TS is a high−performance selector for Ethernet and HDBaseT CAT lines. The user selected input CAT line, either Ethernet or HDBaseT, is connected to the output CAT line with its carried signal and power.

• Easy Input Selection — Click–to–connect manual selection using either panel or remote buttons.
• Reliable PoE (Power over Ethernet) Powering — Selected line remote powering is switched to input line, to provide power to its connected device.
• Easy Installation — Compact DigiTOOLS® fan–less enclosure for desktop or under–table mounting, or side–by–side mounting of 3 units in a 1U rack space with the recommended rack adapter.

The WP−572 is a PoC DGKat™ twisted pair receiver for HDMI signals. The WP−571 converts an HDMI signal to a single twisted pair signal and the WP−572 converts the twisted pair signal back to an HDMI signal.

• Max. Data Rate — 4.95Gbps (1.65Gbps per graphic channel).
• HDTV Compatible.
• HDCP Compliant.
• DGKat™ Signal Integration — Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
• HDMI Support — x.v.Color™, up to 7.1 Uncompressed Audio Channels.
• 3D Pass–Through.
• System Range — Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and display used. If using third–party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly.
• EDID PassThru — Passes EDID signals between the source and display.
• ON LED — Lights red when receiving power only, orange when either input or output and power are attached, and green when both an active input and output are attached.
• Power Connect™ System — A single connection to the transmitter powers the receiver.
• Dimensions — 3.3cm x 3.6cm x 10.4cm (1.3" x 1.42" x 4.1") W, D, H.
• Wall Plate Size — 1 gang US.

WXA−H1/US is a passive wall plate that includes the following inputs: 15−pin HD, 3.5mm Audio, & HDMI.

• Front Panel Connections — 15–pin HD (F), HDMI (F) and 3.5mm (F).
• Rear Panel Connections — 15–pin HD (F), HDMI (F) and 3.5mm (F).
• EDID PassThru — Passes EDID signals from source to display.
• Size — Available in 1 gang US only.
• Keystone connectors (no pigtail).

Kramer's C−D9M/D9F control cables are for RS−232 applications to control devices within a professional AV system. Many Kramer products are RS−232 controllable and equipped with 9−pin D connector. This RS−232 cable helps to connect them safely to transmit the RS−232 serial commands to a touch−screen system, PC, or other serial controller equipped with 9−pin D connector.

• Quality Construction — Constructed using three 28AWG isolated conductors, terminated with male to female molded 9–pin D–sub connectors, nickel plated.
• Pinout — Wired pin to pin on pins 2, 3 & 5.
• Molded Strain Relief.
• RoHS Compliant.

Kramer's C−D9F/OPEN control cables are for RS−232 applications to control devices within a professional AV system. Many Kramer products are RS−232 controllable and equipped with terminal block connector. This RS−232 cable helps to connect them safely to transmit the RS−232 serial commands to a touch−screen system, PC, or other serial controller equipped with D9 connector.

• Quality Construction — Constructed using three 28AWG isolated conductors, terminated with a molded female 9–pin D–sub connector, nickel plated on one side and open end, non–terminated, on the second side.
• Pinout — Wired pin to pin on pins 2, 3 & 5.
• Molded Strain Relief.
• Stripped & Tinned Wires — At open end.
• RoHS Compliant.

The RC−74DL is a 12−button control keypad, with knob and LCD displays. It is a versatile device that connects to powerful control tools: over Ethernet it connects to Kramer's Site−CTRL™, a remote AV control, site management & monitoring system. For extended controlled device capacity it connects to LAN−connected control gateways. For remote keypad control it connects via KNET™ to master room controllers and auxiliary keypads. It flexibly serves either as a standalone room controller, part of multi−units KNET™ system, or part of multi−unit Ethernet system managed by Kramer Site−CTRL™ site management platform. The RC−74DL is ideal for auditoriums and meeting rooms, for convenient control of their complex multimedia systems and other room facilities such as screens, lighting and shades.

• Back Lit & Label Capable Buttons — 12 RGB–color, tactile feedback, backlit buttons. Buttons are grouped in 3 groups, each with it group LCD display.
• Custom Labeled, Removable Button Caps.
• Volume Control Knob with LEDs — Bi–directional rotary dialed digital knob for volume control, with 5 LEDs bar for visual volume level feedback.
• LCD Displays — 3 blue–color and 8 white–characters LCD displays, in 3 button groups, for programmed visual feedback indication and group configured labeling.
• 2 K–NET™ Connectors — Connect to master room controller, and auxiliary keypads for remote keypad control.
• K–NET™ Single Link Connection — Provides a single keypad link cable–connectivity, carrying both power and keypad control communication information.
• 1 RS–485 Bi–directional Control Port — Control devices via RS–485 control protocols.
• 3 RS–232 Bi–directional Control Ports — Control a device via bi–directional serial control protocols.
• 2 IR Emitter Control Ports — Control a device via IR control protocols.
• 2 GPI/O Control Ports — Control a device via general purpose I/O ports, program–configured as digital input, digital output or analog input interface for controlling sensors, door–locks, audio volume and light dimming level, or lighting control devices.
• 4 Relay Control Ports — Control a device via relay contact closure, such as scrolling up and down screens, drapes, shades, and blinds.
• IR Sensor Port — Learns commands from IR remotes.
• Program Control — Program configuration with Kramer K–Config software.
• Kramer Site–CTRL™ Compatibility — For network management and remote control over the Ethernet port.
• Keypad Lock–Out — Option for tampering prevention by locking and unlocking of the keypad buttons.
• Mini USB Port — For uploading configuration files, setting the K–NET™ ID number, and powering the device during configuration.
• Mounting — In–wall, in standard 3 gang US wall junction boxes.
• Easy Installation — Fits to standard in–wall boxes for simple and cost–reducing installation.

Controller is furnished with color design frame, power supply & cord, mud ring, label set and screwdriver

Due to its design, USB cable has a normal maximum length of about 5 meters (16.4 feet), but you can get longer distances by using the CPA−UAM/UAF active USB extension cable from Kramer!

This is a bus−powered extension cable that can be used to increase the length of a device without any signal loss or potential performance problems. It contains active electronics, which boost the USB signal for maximum reliability and performance over extended distances. The cable operates as a self−powered extender, for use with USB cameras‚ printers‚ webcams‚ keyboard/mouse, etc.

Kramer's CP−HM/HM/ETH plenum rated cable is a high−performance cables with molded HDMI connectors at both ends. HDMI standard supports high−definition video plus multi−channel audio in a single cable.

• Plenum Rated — The low smoke and fire–resistant properties of plenum rated cable allow it to reside in air return spaces of ceiling, floors, and walls, often saving the cost of installing conduit.
• Quality Construction — 24AWG, HDMI cables provide an uncompressed digital link for digital audio and high–definition signals between electronic source equipment such as DVD players, set–top boxes and computers and high–definition televisions and large screen displays.
• High–Quality Connectors — 24k gold–plated connectors resist corrosion, and provide the best possible connectivity.
• K–Lock Pull–Resistant Connectors — Provide 15lbs of restraining force for a non–slip connection.