Recently Viewed
Search
Search Criteria
Products meeting the search criteria
The RC-IR3 is an infrared wireless remote control unit for all Kramer IR controllable switchers. The remote can switch up to 96x96 inputs and outputs.
- Memory Locations — Stores up to 99 multiple switches as presets to be recalled and executed when needed.
- Kramer Universal Remote — Includes the protocols of all Kramer devices and is programmable to control any Kramer machine.
- Non–volatile Memory — Retains the last setting, even after the power supply is interrupted.
- Transmits to Built — in and Remote Receivers. — Range up to 15m (50ft) or 60m (200ft) with optional external IR receiver (C–A35M/IRR–50) and 3 extension cables.
VP−772T is a dedicated remote control console for the VP−772 dual scaler seamless switcher. It is designed for use at live production events that require remote operation of the seamless switcher from a T−bar for precise switching and transition control.
- All VP–772 Functions Replicated — All the front panel controls of the VP–772 Seamless Switcher are replicated on the VP–772T.
- Convenient Switching Control — Via the rugged T–bar or a Take button, with selectable transition speed control.
- Menu Button — Control the VP–772 via an on–screen display on the preview output.
- Wipe Direction Control — Via front panel buttons.
- Control Multiple Units — Up to 4 VP–772 Seamless Switchers can be controlled from one VP–772T.
- 2 Gooseneck Lamps — For low light environments.
- Control Options — 4 RS–485 ports to control up to 4 VP–772 units, and 1 RS–232 port for controlling the console.
- Ethernet Port — For configuration and firmware upgrade.
- Power Supply — 12V DC.
- Angled Faceplate — Enables free–standing use on a table.
The ZSP-TR03 is a wireless 5-12 volt projector trigger to automatically drop/rise your screen when your projector is turned on/off.
- Wireless Radio Frequency 5-12 volt trigger automatically controls your Elite Screens electric screens (v2.0) up/down with your projector’s power cycle
- RF (radio frequency) technology allows control up to 60 feet away
- Eliminates the need to wire the connection from your projector to the screen for a clean installation
- Long lasting battery life support up to two years or 2,000 up/down cycles
The N-8610RM Remote Master Station is an IP remote microphone station that employs packet audio technology. High quality voice output is broadcast to N-8000 intercom door and master stations or to paging amplifiers using one of the IP to analog audio outputs available on the N-8000AF, N-8000MI or N-8000EX. 14 pre-programmed buttons provide access to stations, paging zones, one-touch dialing, 10-key and Function key. The N-8610RM may be expanded to 54 buttons using multiple RM-210 Extensions. The N-8610RM may be powered by PoE or an optional AD-1215 power supply. When using PoE with RM-210s, make sure that the available PoE can accommodate a minimum of 7.5 W on one port
Power Source | Power supply device that complies with IEEE802.3af standard or 12 V DC (supplied from the AC adapter (option)) |
---|---|
Power Consumption | Use of the AC adapter (12 V DC): 4 W (microphone only), 8.5 W (when connecting 4 RM-210 Extension units) Use of the PoE (48 V DC): 5.2 W (microphone only) 7.5 W (when connecting 4 RM-210) |
Speech Method | Hands-free or handset conversation (use of goose-neck microphone) |
Audio Frequency Range | 300 Hz - 7 kHz |
Microphone | Unidirectional electret condenser microphone |
Built-in Speaker | 6.6 cm (2.6") cone-type, rated output 0.3 W, 8 Ω |
Network Section | Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation) Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP Audio packet transmission system: Unicast, Multicast Number of paging destinations: Unicast (max. 16), Multicast (max. 191) Connector: LAN: RJ45 connector (PoE compatible) Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software) Quantifying bit number: 16-bit Voice encoding method: Sub-band ADPCM, Cryptosystem Voice packet loss recovery: Silence insertion Audio delay time: 80 ms, 320 ms (controllable on the software) |
No. of Connectable Expansion | Max. 4 units (maximum 2 units at P0E power supply) |
Operation | Function keys (including a covered key), talk key |
Indicator | Power indicator, Status indicator, Selection indicator, Broadcast status indicator, Microphone indicator |
Installation Method | Desk/Surface mounted master station (When mounting to the wall, use the optional WB-RM200) |
Operating Temperature | 0 ℃ to 40 ℃ (32 ゜F to 104 ゜F) |
Operating Humidity | 90 %RH or less (no condensation) |
Finish | ABS resin, blueish gray |
Dimensions | 190 (W) × 76.5 (H) × 215 (D) mm (7.48 × 3.01" × 8.46")" (excluding microphone) |
Weight | 700 g (1.54 lb) |
Accessory | CD (for PC setting, maintenance use) …1, Ferrite clamp (for power supply cable, LAN cable, and extension unit cable) x 1 each |
Option |
Remote microphone extension: RM-210, Wall mounting bracket: WB-RM200, AC adapter: AD-1215P |
The RS-160 vandal resistant single button indoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a 4cm (1.57in) speaker for clear audio and a single vandal resistant metal call button with button bezel, allowing for simple call-in operation. Additionally the substation’s front faceplate is made from thick 11 gauge stainless steel stock for added durability. The call button can be programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The RS-150 single button indoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. The 4cm (1.57in) speaker provides clear audio and the single black call button allows for simple call-in operation. The call button can be programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The RS-180 panic vandal resistant single button outdoor call panel substation is ADA compliant and is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a 4cm (1.57in) speaker for clear audio and a single vandal resistant red anodized metal call button, with button bezel, allowing for simple call-in operation. The call button can be programmed to report to any master station based on job specification. Additionally the substation’s front faceplate is made from thick 11 gauge stainless steel stock for added durability and the circuit boards have been weather treated for moisture exposed installations. Visual call-in progress feedback is achieved with a red LED above the call switch. An open collector trigger is provided for local triggering by the call-in button for devices such as a strobe light or other indicator while a call is in progress. The substation requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The RS-170 vandal resistant single button outdoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a 4cm (1.57in) speaker for clear audio and a single vandal resistant metal call button, with button bezel, allowing for simple call-in operation. Additionally the substation’s front faceplate is made from thick 11 gauge stainless steel stock for added durability and the circuit boards have been weather treated for moisture exposed installations. The call button can be programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
WP-700-AM: Remote Control Panel is a remote control switch/volume panel designed to be used with the MA-725F or MM-700F amplifiers. Provides remote select input source and adjusts volume levels through an Ethernet cable. It can be mounted in a 1-gang electrical box.
Elite Screens Remote Control Kit for Spectrum2 Series(Infrared and Radio Frequency Remotes,5-12vtrigger cable) For Serial Number 197E and After
Elite Screens, Radio Frequency (RF) Remote Control for Electric Motorized Projection Screens, White
Radio Frequency remote control for all Electric Series models.
- RF remote for Electric screens
- Works up to 100 feet
- Includes slide pocket for wall installation
- Requires two AAA batteries (included)
- For use with: Spectrum, Spectrum Tab-Tension, VMAX2, Saker, Saker Tab-Tension, CineTension2, Home 2, Evanesce, Evanesce B, Evanesce Tab-Tension, Evanesce Tab-Tension B, Evanesce Plus, Saker Plus, Kestrel Home 2
Elite Screens, Radio Frequency (RF) Remote Control for OMS Electric Motorized Projection Screens
Infrared remote control for all Electric Series models.
- IR remote for Electric screens
- Works up to 30 feet
- Choice of Black or White
- Includes slide pocket for wall installation
- Requires two AAA batteries (included)
- 1