Search

Vaddio's 999-85820-000 EasyIP CeilingMIC D complements most interiors with its sleek design featuring smooth lines and quality acoustical fabric wrap. These overhead microphones are a great alternative to a custom installation or table microphones. Ceiling-mounted microphones create a clean look in your conference room or meeting space and eliminate table clutter. Vaddio's EasyIP CeilingMIC D is ideal for drop tile ceilings and open-ceiling environments as well.

With full 360-degree pickup coverage, one EasyIP CeilingMIC D provides excellent coverage for an average size meeting room table. Ensure clear coverage of all meeting participants in larger spaces with multiple ceiling microphones - the number of microphones is only limited by the availability of network switch ports. Centrally manage microphone routing and system configuration with free Dante Controller software.

Each EasyIP CeilingMIC D unit delivers the performance of three microphone elements built into a single pendant hanging enclosure. Each unidirectional cardioid microphone element is equipped with integrated echo cancellation and Digital Signal Processing (DSP), including equalization, filtering and automatic gain control (AGC). The DSP in the interface box receives its AEC reference from the far end and applies it to individual mic elements, so conference calls are crystal-clear on both ends of the conversation. Configure and fine-tune the DSP easily with Vaddio's desktop configuration tool.

With its plug-and-play design, installation is as simple as connecting a Cat-5e cable between the network switch PoE port and the EasyIP CeilingMIC D microphone receiver. Power, control and audio are all incorporated into the single cable.

The CeilingMIC pendant includes a 3 ft. (0.9 meters) adjustable drop cable and with a standard RJ45 jack connection, the pendant can be extended to a total length of 15 ft. (4.6 meters) from the interface box.

Features:

• MADE IN THE USA!
• Dante networked audio signal for easy system routing
• Three-element array head for 360-degree coverage
• Design allows for custom ceiling drop cable length and easy installation
• Built-in digital signal processor (DSP)

Specifications:

• Frequency Response: 100 Hz to 16 KHz
• THD + Noise: < 0.02%
• Dynamic Range: >90 dB
• Operating/Storage Temperature: 32°F to 104°F (0°C to 40°C)
• Operating/Storage Humidity: 10% to 80% (non-condensing)
• Maximum Cabling Distance Drop cAble: 15 ft (4.6 m)
• Interface Box To Host Device: 328 ft (100 m)
• Interface Box Dimensions: Length including flange: 10.25 in x 4.6 in x 2 in.
• Microphone body Dimensions: 2.5 in. (6.3 cm)

Item Includes:

• 1x EasyIP CeilingMIC D microphone pendant and interface box
• 1x Quick Start Guide
• 1x 3 ft. (0.9 m) White or Black Cat5e Cable
• 1x Ceiling Mounting Hardware

Warranty:

• 3 years

The Galil 8−C Closed−back Ceiling Speaker features a multi−tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings that are suitable for an array installation.

• Type — 2–way coaxial speaker.
• Woofer — 8” polypropylene cone.
• Tweeter — 1” silk dome.
• Impedance — 8Ω.
• Power Handling — 64W RMS, 180W continuous program.
• Transformer Taps — 70V: 64W/32W/16W/8W/4W/Off (Lo–Z); 100V: 64W/32W/16W/8W/Off (Lo–Z).
• UL 1480 & 2043 Listed
• Package Includes — 2 speakers (1 pair), ceiling mounting kit, template and user manual.

The Galil 6−C Closed−back Ceiling Speaker features a multi−tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings that are suitable for an array installation.

• Type — 2–way coaxial speaker.
• Woofer — 6.5” polypropylene cone.
• Tweeter — 0.5” Mylar dome.
• Impedance — 8Ω.
• Power Handling — 30W RMS, 80W continuous program.
• Transformer Taps — 70V: 30W/15W/7.5W/3.7W/Off (Lo–Z); 100V: 30W/15W/7.5W/Off (Lo–Z).
• UL 1480 & 2043 Listed
• Package Includes — 2 speakers (1 pair), ceiling mounting kit, template and user manual.

The Galil 2−C is a 2.5” full−range closed−back speaker with ceramic terminals and a plastic self−extinguishing back−can. It is especially designed to meet the requirements of fire alarm systems in public spaces and is EN 54−24 certified.

• Type — Closed–back ceiling speaker.
• Woofer — 2.5” paper cone.
• Impedance — 8Ω (transformer tap in off position).
• Power Handling — 10W RMS, 30W continuous program.
• Transformer Taps — 70V — 3W/1.5W/0.75W/8Ω/10W/Off (Lo–Z); 100V — 6W/3W/1.5W/8Ω/10W, Off (Lo–Z).
• Packaging — These are priced individually and can be sold individually. (Full carton size is 18 speakers)

The Galil 6−CO is a pair of two−way open−back 8Ω speakers designed for mounting in the ceiling. The speakers feature a multi−tap power transformer for selecting direct 8Ω (bypassing the transformer) or 70V/100V power settings suitable for distributed installation.

• Type — 2–way coaxial round open–back ceiling speaker with infinite baffle design.
• Woofer — 6.5" polypropylene cone with rubber surround.
• Tweeter — 0.5" Mylar.
• Frequency Response — 60Hz to 20kHz.
• Impedance — 8Ω.
• Sensitivity — (SPL) 87dB (1W @1m with 1kHz).
• Recommended Power — RMS 30W, 80W max.
• Grill — White baffle aluminum grills.
• Package — 2 speakers (1 pair), template and user manual.

The Galil 8−CO is a pair of two−way, open−back, 8Ω speakers designed for mounting in the ceiling. The speakers feature a multi−tap power transformer for selecting 8Ω or 70V/100V power settings suitable for array installation.

• Type — 2–way coaxial speaker.
• Woofer — 8” polypropylene cone.
• Tweeter — 1” silk dome.
• Frequency Response — 60Hz to 20kHz @ ±3dB.
• Impedance — 8Ω.
• Power Handling — 50W RMS, 140W continuous program.
• Transformer Taps — 70V: 50W/25W/12W/6W/Off (Lo–Z); 100V: 50W/25W/12W/Off (Lo–Z).
• Package Includes — 2 speakers (1 pair), cutout template and user manual.
• Mounting Bracket (Optional) — SKIC–8.

The Galil 4−CO is a pair of two−way, open−back, 8Ω speakers designed for mounting in the ceiling. The speakers feature a multi−tap power transformer for selecting 8Ω or 70V/100V power settings suitable for array installation.

• Type — 2–way coaxial speaker.
• Woofer — 4" polypropylene cone.
• Tweeter — 0.5” Mylar dome.
• Frequency Response — 80Hz to 20kHz@ ±3dB.
• Impedance — 8Ω.
• Power Handling — 15W RMS, 40W continuous program.
• Transformer Taps — 70V: 15W/7.5W/3.7W/Off (Lo–Z); 100V: 15W/7.5W/Off (Lo–Z).
• Package Includes — 2 speakers (1 pair), cutout template and user manual.

The Galil 4−C Closed−back Compact Ceiling Speaker features a multi−tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings that are suitable for an array installation. The Galil 4−CO open−back version is also available.

• Type — 2–way coaxial speaker.
• Woofer — 4” polypropylene cone.
• Tweeter — 0.5” Mylar dome.
• Impedance — 8Ω.
• Power Handling — 30W RMS, 80W continuous program.
• Transformer Taps — 70V: 30W/15W/7.5W/3.7W/Off (Lo–Z); 100V: 30W/15W/7.5W/Off (Lo–Z).
• UL 1480 & 2043 Listed
• Package Includes — 2 speakers (1 pair), ceiling mounting kit, template and user manual.
• Installation Dimensions — External diameter: 19.5cm (7.68"); cutout diameter: 16.7cm (6.57")

Model JG-8X steel grille with beveled edges and white finish includes a separate sub-plate that direct-mounts an 8-inch speaker and enclosure. The direct-mount method allows a high quality 8-inch speaker with a substantial motor structure weight to be supported by the enclosure instead of the grille.

Specifications

• Style:  Screw-mount
• Material:  20-gauge beveled frame with radius corner cutout and welded 22-gauge perforated steel screen, 21-gauge steel subplate
• Finish:  White grille, black subplate
• Size:  12.375 in. square
• Mounting Projection:  0.375 in.
• Mounting Provisions:  4 screws (white), subplate w/4 screws

Certification and Compliance

• Made in the U.S.A.
• Certified U.S. steel

A&E Specifications

The JG-8X square speaker grille for the 8 inch driver shall be Lowell Model JG-8X. It shall be 20-gauge steel frame with a beveled edge, radius corner cutout and 22-gauge welded perforated screen center. The grille shall include a 21-gauge steel subplate and mounting hardware. The grille shall be 12.375 in. square with a mounting projection of 0.375 in. The subplate shall include provisions for mounting an 8 in. driver and for mounting the speaker/adapter assembly to specified recessed or surface backbox. The subplate shall be finished in black powder epoxy. The grille shall be finished in white powder epoxy and shall mount to the specified backbox using four 8-32 x .375 in. white screws.

Specifications

• Style:  Screw-mount
• Material:  Precision formed single piece of 20-gauge steel reinforced with 60-degree peripheral flange, perforated center, contoured edge
• Finish:  White
• Size:  12.875 in. diameter
• Mounting Projection:  0.25 in. mounting projection
• Mounting Provisions:  4 screws (white), welded studs w/nuts

Certification and Compliance

• Made in the U.S.A.
• Certified U.S. steel

A&E Specifications

The contoured speaker grille for 8 inch speakers shall be Lowell Model WB-8. It shall be fabricated one-piece 20-gauge steel reinforced with a peripheral flange of 60-degrees. The grille diameter shall be 12.875 inch with a shallow mounting projection of 0.25 in. Each grille shall have four 0.25 in. holes spaced at 90-degree intervals on an 11.25 in. bolt circle for mounting grille to specified backbox or mounting ring. It shall be finished in white powder epoxy coating and include white screws for backbox mounting and welded studs for mounting specified 8 in. speaker.

The Yarden 8−T High−Performance Ceiling Tile Stereo Speaker features a Kevlar(R) woofer, four pivoting titanium tweeters, complete K−overage ESD™ (Equal Sound Dispersion) design for almost 180 degrees of sound dispersion. It features speech mode to improve intelligibility, music mode for an extra wide frequency response and stereo and mono modes to fit any kind of installation. It also features a magnetically held grill (with two security screws) for time saving installation, 2nd level cross−over design and multi−tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings that are suitable for an array installation.

• Type — 2–way ceiling tile speaker.
• Woofer — 8” Kevlar(R) cone.
• Tweeters — Four pivoting 0.75” titanium domes.
• Impedance — Stereo 8Ω, mono 4Ω.
• Stereo/Mono Selector Switch.
• Speech/Music Selector Switch.
• Power Handling — 2 x 40W RMS, 2 x 110W continuous program.
• Transformer Taps — Stereo: 70V: 2 x 30W/15W/7.5W/3.7W, 100V: 2 x 30W/15W/7.5W; Mono: 70V: 60W/30W/15W/7.5W, 100V: 60W/30W/15W.
• UL Certification — UL 1480 & 2043 listed and plenum compliant.
• Package — 1 speaker.

The Tavor 8−T High Performance Powered Ceiling Tile Speaker features a 40 watt built−in class D power amplifier, three inputs, Kevlar(R) woofer, four pivoting titanium tweeters, complete K−overage ESD™ (Equal Sound Dispersion) design for almost 180 degrees of sound dispersion, magnet held grill (with two security screws) for time saving installation, and a 2nd−level cross−over.

• Type — 2–way ceiling tile speaker.
• Built–in Power Amplifier — 40W RMS, 110W continuous program.
• Woofer — 8” Kevlar(R) cone.
• Tweeter — Four pivoting 1” titanium domes.
• 3 Inputs with Individual Volume Control.
• Master Volume Control.
• Package — 1 Speaker.

Quick-install speaker system for suspended tile ceilings features an 8-inch dual cone driver with dual voltage (25V/70V) transformer, 2x2 fine perforation grille with sub-plate and enclosure. For commercial paging and background music.

Includes

• Driver (810):  8 in. 15W dual cone driver with 10 oz. magnet, frequency response of 54Hz-11.6kHz (±6dB) and 50Hz-20kHz (±6.6dB), and average sensitivity of 97.9dB measured 1W/1M. Conical dispersion 95 degrees.
• Transformer:  Dual voltage 25V/70V transfomer with taps at .25, .5, 1, 2, 5W
• Grille with Subplate (2×2):  Fine-perforation grille provides maximum free-air space for excellent sound transmission while maintaining an unobtrusive appearance in new or existing tile ceilings. White.
• Enclosure (8XD4):  .147 cu.ft. steel with speaker leads that exit through a metal clamp for fast connection. Black.
• Mounting Aids:  Restraint tabs.

A&E Specifications

The 2×2 ceiling tile speaker shall be Lowell Model No. LT2-810-72-BB. The 2’x2′ system shall directly replace a 2’x2′ ceiling tile. Each speaker system shall include a factory-mounted driver mounted to a subplate with a fine perforation steel grille finished in white powder epoxy. The driver shall be 8 inch dual cone with a power rating of 15W. It shall have a magnet weight of 10 ozs., frequency response of 54Hz-11.6kHz (±6dB) and 50Hz-20kHz (±6.6dB), and average sensitivity of 97.9dB measured 1W/1M. The system shall include a steel backbox (.147 cu.ft.) with leads exiting through a metal clamp. The dual voltage transformer (25V/70V) shall feature primary taps at .25, .5, 1, 2 and 5W.

Description

The Cathedral Ceiling Adaptor can be used with 1.5"-11.5 NPT extension columns (EXT, AEC models only) to securely mount and support a projector or flat panel display from an angled ceiling. This adaptor offers 95°/-5° of adjustment and includes a security slot for theft resistance. The ACC-CCP is a low-profile, secure solution to support nearly any projector or display in an angled ceiling application.

Features

• 95°/-5° of adjustment
• Compatible with 1.5"-11.5 NPT(38mm) extension columns
• Can be mounted directly to wood studs or concrete
• Includes a security slot for theft resistance

Overview

The MuxLab Dante Ceiling Speaker PoE, 40W (500221) is a high performance full band and easy installation speaker ideal for providing background music and vocal performance for a wide range of applications and installations. The speaker is designed with advanced linear sound source technology.

The MuxLab Dante Ceiling Speaker PoE, 40W comes with a 6.5" coaxial 40W loudspeaker driver that has excellent dispersion, wide bandwidth, and smooth frequency response which makes this the top choice for today's overhead commercial and residential applications. To achieve the distribution of power supply, audio signal transmission, and control functions the Dante Ceiling Speaker PoE, 40W uses only a network cable, making it a very economical option with great energy savings.

Applications

• Conference rooms
• Shopping center
• Houses of worship
• Hospitals
• Restaurants
• Education
• Airports
• Retail stores

Features

• Dante protocol
• Built-in power amplifier module
• Precise DSP matching
• Power Supply via PoE
• Free sound calibration software tool available

Specifications

• Frequency Response: 90Hz ~ 16KHz
• Audio Input: Dante Audio via Ethernet
• Peak Power: 40W
• Route Switching Control: Dante™ Controller Software
• Network Interface: RJ-45 x 1
• Driver Specifications: HF: 1" x 1, LF: 6.5" x 1 Coaxial unit
• Power Supply: PoE+ (IEEE 802.3AT/BT)
• Built-in Function: DSP/Dante/Amplifier
• DSP Function: Gain, Mute, 5-Band PEQ, Limiter
• Power Supply: Limiter PoE Network Switch
• Hanging Method: Built-in buckle
• Product Dimensions: Φ278 x 176mm
• n Hole Dimension: Φ246mm
• Depth of Opening: 240mm
• Unit Weight: 6.17Lbs (2.8kg)
• Shipping Weight: 8.0 lbs (3.6kg)
• Warranty: 2 years