Recently Viewed
Search
Search Criteria
Products meeting the search criteria
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.
Features
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Electronically balanced RCA and XLR inputs; Speakon and binding post outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio- frequency interference
- Efficient forced-air cooling prevents excessive thermal buildup
Specifications
- Frequency Response (at 1 Watt): 20Hz - 20kHz, 0/-1dB
- Total Harmonic Distortion (THD): < 0.5%, 20 Hz - 20 kHz
- Intermodulation Distortion (IMD) (60 Hz and 7 kHz at 4:1 from full rated output to -30 dB: =/ < 0.35%
- Slew Rate: >10V/us
- Voltage Gain: 31dB
- Damping Factor (8ohms), 10 Hz-400 Hz: > 200
- Signal to Noise Ratio (A-weighted): >100dB
- Input Sensitivity for Full Rated Power at 8 Ohms: 0.775V or 1.4V
- Input Impedance (nominal)
- Balanced: 20 K Ohm
- Unbalanced:10 K Ohm
- AC Line Voltage and Frequency Configuration ( 10%):
- 120V~ 60Hz
- 220V~ 50/60Hz
- 230-240V~ 50/60Hz
- Width: 19 in. (48.3cm)
- Height: 3.5 in. (8.9cm)
- Depth: 14.4 in. (31.5cm)
- Weight: 43.1 lbs (11.4kg)
Warranty
Crown products are covered by a 6 Year Warranty
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.
Features:
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Electronically balanced RCA and XLR inputs; Speakon and binding post outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio- frequency interference
- Efficient forced-air cooling prevents excessive thermal buildup
Specifications:
- Frequency Response (at 1 Watt): 20Hz - 20kHz, 0/-1dB
- Total Harmonic Distortion (THD): < 0.5%, 20 Hz - 20 kHz
- Intermodulation Distortion (IMD) (60 Hz and 7 kHz at 4:1 from full rated output to -30 dB: =/ < 0.35%
- Slew Rate: >10V/us
- Voltage Gain: 31dB
- Damping Factor (8ohms), 10 Hz-400 Hz: > 200
- Signal to Noise Ratio (A-weighted): >100dB
- Input Sensitivity for Full Rated Power at 8 Ohms: 0.775V or 1.4V
- Input Impedance (nominal)
- Balanced: 20 K Ohm
- Unbalanced:10 K Ohm
- AC Line Voltage and Frequency Configuration ( 10%):
- 120V~ 60Hz
- 220V~ 50/60Hz
- 230-240V~ 50/60Hz
- Width: 19 in. (48.3cm)
- Height: 3.5 in. (8.9cm)
- Depth: 12.4 in. (31.5cm)
- Weight: 28 lbs (11.4kg)
Warranty:
Crown products are covered by a 6 Year Warranty
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.
Features
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Electronically balanced RCA and XLR inputs; Speakon and binding post outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio- frequency interference
- Efficient forced-air cooling prevents excessive thermal buildup
Specifications
- Frequency Response (at 1 Watt): 20Hz - 20kHz, 0/-1dB
- Total Harmonic Distortion (THD): < 0.5%, 20 Hz - 20 kHz
- Intermodulation Distortion (IMD) (60 Hz and 7 kHz at 4:1 from full rated output to -30 dB: =/ < 0.35%
- Slew Rate: >10V/us
- Voltage Gain: 31dB
- Damping Factor (8ohms), 10 Hz-400 Hz: > 200
- Signal to Noise Ratio (A-weighted): >100dB
- Input Sensitivity for Full Rated Power at 8 Ohms: 0.775V or 1.4V
- Input Impedance (nominal)
- Balanced: 20 K Ohm
- Unbalanced:10 K Ohm
- AC Line Voltage and Frequency Configuration ( 10%):
- 120V~ 60Hz
- 220V~ 50/60Hz
- 230-240V~ 50/60Hz
- Width: 19 in. (48.3cm)
- Height: 3.5 in. (8.9cm)
- Depth: 12.4 in. (31.5cm)
- Weight: 25.1 lbs (11.4kg)
Warranty
Crown products are covered by a 6 Year Warranty
Description
The M-900MK2 Mixer Preamplifier controls and mixes up to eight independent input signals and delivers up to +20 dBm of output power. Optional plug in modules are available for use with mixer preamplifier to provide versatility for a wide range of operating applications
Specifications
| Type | 8-channel mixer preamplifier |
|---|---|
| Power Requirement | AC mains, 120 V, 60 Hz |
| Power Consumption | 18 W |
| Rated Output | +4 dBm, +20 dBm (max.) |
| Power Band Width | 30 〜 20,000 Hz, +20 dBm 0.5% THD 25 〜 20,000 Hz, +18 dBm 0.5% THD |
| Frequency Response | 20 〜 20,000 Hz, ±1 dB |
| T.H.D | 0.01% at 1 kHz, rated output |
| Inputs | Eight Input Ports : Each port accepts any input modules. One Bridging Input/Output |
| Input Sensitivity /Impedance | Input Port #1 to #8 : 100 mV/10 kΩ Bridging Input/Output : 100 mV/3.3 kΩ |
| Outputs | Main : Balanced, 150/600 Ω AUX : Unbalanced, 10 kΩ, 0 dBm |
| Output Regulation(1kHz) | Less than 1.5 dB, no load to full load |
| S/N Ratio Tone defeat switch on | Master volume min : 90 dB (Band Pass 20 〜 20,000 Hz) Master volume max : 77 dB (Band Pass 20 〜 20,000 Hz) |
| Tone Controls | Bass : ±10 dB at 100 Hz, Treble : ±10 dB at 10 kHz |
| Controls | 8 Input gain controls 1 Master gain control 1 Bass control 1 Treble control 1 Power ON/OFF switch 1 Tone defeat switch |
| Indicators | 1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED |
| Protection | Self-protection, with AC fuse (inside) |
| Connectors | Input No.1 to No.8 : Card-edge connector Bridging, Aux output : RCA phone jack Output : Screw-terminal strip Mute, Remote VR : Screw-terminal strip AC power cord/plug : SJT, 3-prong type AC outlet : 3-pin grounding type |
| Temperature Range | -10℃ 〜 +60℃ (12゜F 〜 140゜F) |
| Finish | Black |
| Dimensions(W×H×D) | 420(16.54") × 99.1(3.90") × 307.5(12.11") mm |
| Weight | 5.3 kg (11.68 lb.) |
| Accessories | Volume control covers (YA-920)……4 |
| Option | Rack mounting bracket (MB-25B) |
The MA-725F is a 6-input matrix mixer: 4 of its inputs are configured for BGM or other line-level sources, while two balanced inputs are designated for priority sources, such as paging mics or message players. This is coupled in a single chassis with a 4 x 250W (@70 or 100V) Class D amplifier section, capable of driving large speaker compliments with maximum efficiency. It has capability to control by API.
A totally digital product sporting 24Bit/48kHz digital sound quality, its simple user-interface belies its advanced inner workings. The only controls any user needs to access are the front panel source select buttons and four output level (zone) controls. All other controls are placed on the rear panel to prevent unauthorized tampering. An optional wall control (WP-700-AM) can be connected via a single shielded CAT5 cable to each of the four output channels, allowing access to volume and source select.
The new TOA MA-725F Matrix Amplifier is developed from years of experience providing mixer-amplifiers for the retail industry (with a client list that’s a virtual “who’s who” of retail) and with the cooperation of some of its top players, the MA-725F is designed to address the demand for a simpler and more cost-effective, mid-level background music and paging systems needing higher power with multiple zones. Just as advanced as some of its high-priced kin, but without the complicated setup or programming required by many other solutions.
The digital mixer section also features a menu of 26 TOA speaker EQ presets (selectable by dip-switch), factory-loaded, to optimize the sound of our most popular PA and audio speakers. It also provides settings to allow bi-amping with subwoofers and offers many popular audio playback EQ curves. TOA will also offer a non-powered Matrix Mixer version (MM-700F) for use with external amplifiers to allow for customized power selection.
The WP-700-AM is a remote control switch/volume panel that is designed for the MA-725F mixer amplifier, which can remote select input source and adjust volume levels when connected via a shielded Ethernet cable to the MA-725F mixer amplifier. It can also be mounted in a 1-gang electrical box (American type).
The browser Control feature allows password protected control of source, volume control and options from a browser on your PC (Internet Explorer, Google Chrome, Firefox, etc.). Smartphones (iOS or Android devices) using a browser function are also supported.
The BG-2480D (480W) is 5-input mixer amplifier designed for background music distribution and general announcements in commercial spaces such as bars/restaurants, retail stores and hospitality facilities. They are each equipped with an MOH output that permits two independent zones when used in conjunction with an optional external power amplifier with a line level analog audio input.
It uses D-class amplifiers which are lighter, more efficient and cooler running than conventional amplifier and have the same basic feature set as analog BG-2000 models, including:
- Dual balanced priority mic/line inputs
- dual unbalanced line inputs
- assignable 2nd zone/MOH output
- front panel bass and treble controls
- remote volume control port
- assignable mute function
- a 900 series input module slot (output modules not compatible).
The BG-2240D (240W) is 5-input mixer amplifier designed for background music distribution and general announcements in commercial spaces such as bars/restaurants, retail stores and hospitality facilities. They are each equipped with an MOH output that permits two independent zones when used in conjunction with an optional external power amplifier with a line level analog audio input.
It uses D-class amplifiers which are lighter, more efficient and cooler running than conventional amplifier and have the same basic feature set as analog BG-2000 models, including:
- Dual balanced priority mic/line inputs
- dual unbalanced line inputs
- assignable 2nd zone/MOH output
- front panel bass and treble controls
- remote volume control port
- assignable mute function
- a 900 series input module slot (output modules not compatible).
The BG-2120 is a 120 W 5-input mixer amplifier for background music and general announcements. It is suited for use in bars, retail stores, and banquet rooms, and is equipped with the MOH OUT that permits 2-channel broadcast when used in conjunction with the optional booster amplifier BA-235 (35 W) or BA-260 (60 W)
It is a total redesign of the highly successful BG-1000 Series and not just for design's sake. We spoke with our customers, who told us exactly what they wanted in a commercial background music & paging amplifier. We responded with a newly-engineered chassis, designed to not only look better, but perform better and most of all-install easier. Starting with removable euro-block connectors to make wiring a snap, we added assignable MOH/Second Zone source assignment and provided access to mute priority and other settings via rear panel DIP switches - no more popping the top. Lastly, we've upped the power to 35W on the lower end model. Of course, we kept all the good stuff-solid, reliable performance for which TOA has been renowned.
The BG-2060 is a 60 W 5-input mixer amplifier for background music and general announcements. It is suited for use in bars, retail stores, and banquet rooms, and is equipped with the MOH OUT that permits 2-channel broadcast when used in conjunction with the optional booster amplifier BA-235 (35 W) or BA-260 (60 W)
It is a total redesign of the highly successful BG-1000 Series and not just for design's sake. We spoke with our customers, who told us exactly what they wanted in a commercial background music & paging amplifier. We responded with a newly-engineered chassis, designed to not only look better, but perform better and most of all-install easier. Starting with removable euro-block connectors to make wiring a snap, we added assignable MOH/Second Zone source assignment and provided access to mute priority and other settings via rear panel DIP switches - no more popping the top.
The TP−410 is a high−performance distribution amplifier for computer graphics up to WUXGA or twisted pair video, unbalanced stereo or S/PDIF audio, and bi−directional RS−232 signals. The RS−232 and selected audio/video inputs, distributed to ten twisted pair outputs.
- Resolution — Up to and including WUXGA (1920x1080).
- Selectable Inputs — Local or twisted pair (WUXGA, audio and RS–232).
- Data Handling — Extensive bidirectional RS–232 embedding, de–embedding and other options.
- Selectable Analog or Digital Audio Input.
- EDID Capture — Copies and stores the EDID from a display device.
- Transmission Range — Up to 300ft (100m) over STP cabling.
- Flexible Control Options — Front panel, RS–232, RS–485, Ethernet.
- Controls — Source selection buttons, power and source indicator LEDs, TP LEVEL and EQ trimmers.
- Worldwide Power Supply — 100–240V AC.
- Standard 19” Rack Mount Size — 1U. Rack "ears" included.