Recently Viewed
Search
Search Criteria
Products meeting the search criteria
The N-8010MS is a standard master station (no LCD display) that connects to an N-8000EX or N-8010EX intercom exchange by a single twisted pair wire. It is capable of full duplex hands-free or handset communication with other full duplex stations. The N-8010MS master station may be wall or desk mounted.
| Power Source | 48 V DC (supplied from the IP intercom exchange (option)) |
|---|---|
| Power Consumption | 1.8 W (at rated), 2.4 W (max.) |
| Wiring Method | 1 set of twisted pair cable |
| Transmission System | 2 wire 160 kbps echo canceller transmission system |
| Signal Level | Under 0 dB* |
| Speech Method | Hands-free or handset conversation |
| Audio Frequency Range | 300 Hz - 7 kHz |
| Transmission Range | Max. 1500 m (φ0.65 mm, Loop resistance 170 Ω) |
| Hands-free | Speaker: 5.7 cm cone-type, 0.6 W, 8 Ω Microphone: Omni-directional electret condenser microphone |
| Handset | Receive path: Dynamic type Send path: Electret condenser microphone |
| Indication | Status lamp |
| Line Connecting Terminal | RJ11 modular jack |
| Installation Method | Desk/Surface mounted master station (When mounting to the wall, use the optional YC-280.) |
| Operating Temperature | 0 ℃ to 40 ℃ |
| Operating Humidity | Under 90 % RH (no condensation) |
| Finish | Body, Handset: ABS resin, gray |
| Dimensions | 148 (W) x 208 (H) x 70.5 (D) mm (excluding a curl cord section) |
| Weight | 700 g |
| Accessory | Connection cord (3 m) …1 |
| Option | Wall mounting bracket: YC-280 |
The N-8052DS is a 2-gang version of the N-8050DS. It is a door station designed to connect to an N-8000EX or N-8010EX intercom exchange. It provides high quality, hands-free conversation with a master station on an N-8000 system. The N-8052DS includes a remote controllable open collector control output (momentary 1-9 seconds). The N-8052DS supports the audio trigger function.
| Power Source | 48 V DC (supplied from the IP intercom exchange (option)) |
|---|---|
| Power Consumption | 1.8 W (at rated), 2.4 W (max.) |
| Wiring Method | 1 set of twisted pair cable |
| Transmission System | 2 wire 160 kbps echo canceller transmission system |
| Signal Level | Under 0 dB* |
| Speech Method | Hands-free conversation |
| Audio Frequency Range | 300 Hz - 7 kHz |
| Transmission Range | Max. 1500 m (φ0.65 mm. Loop resistance 170 Ω) |
| Hands-free | Speaker: 3.5 cm cone-type, 1 W, 8 Ω Microphone: Omni-directional electret condenser microphone |
| Contact Output | Open collector output, withstand voltage: Max. 30 V DC, control current: Max. 50 mA, one shot: can be set from 1 to 9 s, screw terminal (polarized) |
| Line Connecting Terminal | 2 wire, screw terminal (non-polar) |
| Setting Method | Flush-mount/Surface-mount |
| Operating Temperature | -10 ℃ to 50 ℃ |
| Operating Humidity | Under 90 % RH (no condensation) |
| Housing Protection | BS EN62262: 2002: IK02 equivalent |
| Finish | Plate: Stainless steel (SUS304), hairline Call button: Metal |
| Dimensions | 120 (W) x 120 (H) x 50.5 (D) mm |
| Weight | 525 g |
| Accessory | Box mounting screw (No.6-32UNC × 18) …4, Box mounting screw (M4 × 25) …4, Acoustic absorbent (made of felt) …1 |
| Applicable Box (option) | For flush mount: 3-gang electrical box or Back Box YC-302 (option) For wall mount: Wall-mount Box YC-822 (option) |
The N-8000MS is a multi-function master station that connects to an N-8000EX or N-8010EX intercom exchange by a single twisted pair wire. It is capable of full duplex hands-free or handset communication with other full duplex stations. It includes an Alpha-numeric LCD display, one-touch dialing, headset connection and an external speaker connection (.6 W @ 8Ω). External or internal speaker priority is supported. The master station may be wall or desk mounted.
| Power Source | 48 V DC (supplied form the IP intercom exchange (options)) |
|---|---|
| Power consumption | 1.8 W (at rated), 2.4 W (max.) |
| Wiring Method | 1 set of twisted pair cable |
| Transmission System | 2 wire 160 kbps echo canceller transmission system |
| Signal Level | 0 dB* or less |
| Speech Method | Hands-free or handset conversation |
| Audio Frequency Range | 300 Hz - 7 kHz |
| Transmission Range | Max. 1500 m (φ0,65 mm, loop resistance 170 Ω) |
| Hands-free |
Speaker: 5.7 cm cone-type, 0,6 W, 8 Ω |
| Handset | Receive path: Dynamic type Send path: Electret condenser microphone |
| Display | LCD: Alphanumeric characters (16 characters x 2 lines) |
| Indication | Status lamp |
| Line Connecting Terminal | RJ11 modular jack |
| Headset Terminal | Spaker: 3 mW, 32 Ω; microphone : -49 dB*, φ3,5 mm mini jack |
| External Speaker Terminal | 0.6 W, 8 Ω, screwless connector (2 pins) |
| Installation Method | Desk/Surface mounted master station (when mounted to the wall, use the optional YC-281.) |
| Operating Temperature | 0 ℃ to 40 ℃ |
| Operating Humidity | 90% RH or less (no condensation) |
| Finish | Body, Hndset: ABS resin, gray |
| Dimensions | 148 (W) x 208 (H) x 69.7 (D) mm (excluding a curl cord section) |
| Weight | 800 g |
| Accessory | Connection cord (3 m) x 1 |
| Option | Wall mounting bracket: YC-280 |
The N-8031MS is a flush- or surface-mount master station designed to operate in conjunction with TOA IP Intercom Exchange and features high quality hands-free conversation. Connecting a foot switch or other external switch to the external dial input terminal permits one-touch dialing operation by way of such switches. Handset conversation can be established in conjunction with the optional RS-191.
| Power Source | 48 V DC (supplied from the IP intercom exchange (option)) |
|---|---|
| Power Consumption | 1.8 W (at rated), 2.4 W (max.) |
| Wiring Method | 1 set of twisted pair cable |
| Transmission System | 2 wire 160 kbps echo canceller transmission system |
| Signal Level | Under 0 dB* |
| Speech Method | Hands-free conversation (Handset conversation can be established in conjunction with the RS-191(option).) |
| Audio Frequency Range | 300 Hz - 7 kHz |
| Transmission Range | Max. 1500 m (φ0.65 mm, Loop resistance 170 Ω) |
| Hands-free | Speaker: 5.7 cm cone-type, 0.6 W, 8 Ω Microphone: Omni-directional electret condenser microphone |
| Indication | Status lamp |
| Line Connecting Terminal | Pin header (2 pins) |
| External Dial Input | No-voltage make contact input, open voltage: 5 V DC, short-circuit current: 1mA, screwless connector (5 pins) |
| Installation Method | Flush-mount/Surface-mount |
| Operating Temperature | 0 ℃ to 40 ℃ |
| Operating Humidity | Under 90 % RH (no condensation) |
| Finish | Panel: Stainless steel (SUS304), hairline |
| Dimensions | 115 (W) × 254 (H) × 54.6 (D) mm |
| Weight | 850 g |
| Accessory | Box mounting screw (No.6-32UNC × 18) …4, Box mounting screw (M4 × 25) …4, Removable terminal plug (2 pins, preinstalled on the unit) …1, Acoustic absorbent …1, Handset jumper (8 pins, preinstalled on the unit) …1, Ferrite clamp …1 |
| Option | For flush-mount: Back Box YC-241 For surface-mount: Wall-mount Box YC-251 |
The RS-144 dual button call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides Emergency (Red) and Normal (white) buttons that can be individually programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US single gang flush or wall mount box. The optional RS-141 handset for private calling, or a 25V/1W speaker such as the PC-580RU for room announcement applications, can be connected to the call panel station
The RS-160 vandal resistant single button indoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a 4cm (1.57in) speaker for clear audio and a single vandal resistant metal call button with button bezel, allowing for simple call-in operation. Additionally the substation’s front faceplate is made from thick 11 gauge stainless steel stock for added durability. The call button can be programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The RS-150 single button indoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. The 4cm (1.57in) speaker provides clear audio and the single black call button allows for simple call-in operation. The call button can be programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The RS-180 panic vandal resistant single button outdoor call panel substation is ADA compliant and is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a 4cm (1.57in) speaker for clear audio and a single vandal resistant red anodized metal call button, with button bezel, allowing for simple call-in operation. The call button can be programmed to report to any master station based on job specification. Additionally the substation’s front faceplate is made from thick 11 gauge stainless steel stock for added durability and the circuit boards have been weather treated for moisture exposed installations. Visual call-in progress feedback is achieved with a red LED above the call switch. An open collector trigger is provided for local triggering by the call-in button for devices such as a strobe light or other indicator while a call is in progress. The substation requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
The RS-170 vandal resistant single button outdoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a 4cm (1.57in) speaker for clear audio and a single vandal resistant metal call button, with button bezel, allowing for simple call-in operation. Additionally the substation’s front faceplate is made from thick 11 gauge stainless steel stock for added durability and the circuit boards have been weather treated for moisture exposed installations. The call button can be programmed to report to any master station based on job specification. It requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.