Search

The RS-143 single button call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a single red call button.

The RS-140 dual button call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides Call (Red) and Privacy (white) buttons.

The RS-144 dual button call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces.  It provides Emergency (Red) and Normal (white) buttons that can be individually programmed to report to any master station based on job specification.

The RS-160 vandal resistant single button indoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces.

The RS-150 single button indoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces.

The RS-180 panic vandal resistant single button outdoor call panel substation is ADA compliant and is designed to be used with the N-8000RS or N-8010RS substation interfaces.

The RS-170 vandal resistant single button outdoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces.

The N-SP80 series SIP Video Intercom System offers flexible audio and video communications using standard SIP and Onvif protocols.

The N-SP80AS1 SIP Audio Door Station is designed to provide clear and intelligible communication to a Multimedia Station over an Ethernet network. It is equipped with an assignable call switch and two control relay outputs.

The N-SP80VS1 SIP Video Door Station is designed to provide clear and intelligible communication to a Multimedia Station over an Ethernet network. It is equipped with an assignable call switch, a night-view camera and two control relay outputs.

The SP-11N is a VoIP phone paging module supported SIP (Session Initiation Protocol) with Auto-answer function.

The SP-11NB-AM is a stand-alone enclosure for TOA's SP-11N AM SIP VoIP Paging Module.

The Q-N8050WP is a weather resistant door station designed to connect to an N-8000EX or N-8010EX intercom exchange. It provides high quality, hands-free conversation with a master station on an N-8000 system.

Converts the output signal of the interface unit into a line level audio signal or a 25V line speaker output

The in-wall design and elegant appearance make this panel ideal for saving space and integrating with various facilities requiring a microphone, auxiliary, USB, or Bluetooth audio input.

Designed for paging calls and general announcements

The Q-BB-580W White Square Surface Mount Back Box is a metal case that can be attached to TOA’s IP-A1PC580S flush-mount ceiling speaker for exposed applications.

The IP-A1RM is an IP remote microphone which is designed to make audio broadcasts to IP-A1 series receiving devices via network.

The IP-A1PC580R is a PoE-powered Ceiling Speaker with a built-in 8 W amplifier and internal data storage for up to 20 audio files.

The IP-A1PC580S is a PoE-powered Surface mount Speaker with a built-in 8W amplifier and internal data storage for up to 20 audio files.

The IP-A1PC238 is a 6-inch PoE-powered Ceiling Speaker with a built-in 8 W amplifier and internal data storage for up to 20 audio files.

The IP-A1SC15 is an IP paging horn speaker to deliver clear announcements via network with 124 dB output capability powered by PoE power source.

The IP-A1PA12 is a compact 12 W amplifier which is designed to amplify audio signals received through network.

Audio accessory unit to be used in conjunction with IP-A1 series devices for having two-way conversations or audio monitoring.

Convert SIP audio, ONVIF, internal audio files or local audio source into Multicast streaming

The IP-A1AF is a PoE-powered Audio Interface that decodes IP audio streams into analog audio signals.

The N-8600MS is the IP Master Station for the N-8000 intercom system.

The N-8610RM Remote Master Station is an IP remote microphone station that employs packet audio technology.

The N-8640DS is an IP65, impact resistant IP door station with a separate microphone and speaker, allowing full duplex conversations with Master Stations.

The N-8650DS is an indoor IP door station with a separate microphone and speaker, allowing full duplex conversations with Master Stations

The N-8010RS Substation Interface Unit uses packet audio technology to permit connection of up to 16 RS-1xx series call switches or door stations.

The N-8000EX IP Intercom Exchange uses packet audio technology to permit connection of up to 16 N-8000 series 2-wire master or door stations.

The N-8010EX IP Intercom Exchange uses packet audio technology to permit connection of up to 16 N-8000 series 2-wire master or door stations.

The N-8000RS Substation Interface Unit uses packet audio technology to permit connection of up to 16 RS-1xx series call switches or door stations.

The N-8000AF provides either an analog audio input/output bridge to the N-8000 system, a bell schedule generator with internal tones, or record functionality for archival purposes.

The N-8000CO is a C/O interface unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It has an analog central office line circuit, allowing the intercom station to make and receive calls to and from the telephone line.

The N-8000DI is a Direct select unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It is equipped with each 32 contact inputs and outputs, and the indicators on the front panel indicate the output statuses.

The N-8000MI is a multisource interface for the N-8000 intercom system.

The N-8011MS is a hands-free master station that connects to an N-8000EX or N-8010EX intercom exchange by a single twisted pair wire.

The N-8031SB is a PCB kit version of the N-8031MS for custom installations where a custom interface is desired. It connects to an N-8000EX or N-8010EX exchange by a single twisted pair cable.

The N-8050SB is a printed circuit board unit for the N-8050DS Door Station, You can make the sub station suitable for applications using the N-8050SB in combination with the operation panel section to be prepared separately.

Designed to connect to the IP Intercom Exchange, the N-8050DS is a door station featuring high quality hands-free conversation. It has a contact output (momentarily closed) to remotely control an electronic door lock.

The N-8010MS is a standard master station (no LCD display) that connects to an N-8000EX or N-8010EX intercom exchange by a single twisted pair wire.

The N-8052DS is a 2-gang version of the N-8050DS. It is a door station designed to connect to an N-8000EX or N-8010EX intercom exchange.

The N-8000MS is a multi-function master station that connects to an N-8000EX or N-8010EX intercom exchange by a single twisted pair wire.

The N-8031MS is a flush- or surface-mount master station designed to operate in conjunction with TOA IP Intercom Exchange and features high quality hands-free conversation.

Quick-install speaker system for suspended tile ceilings features an 8-inch dual cone driver with dual voltage (25V/70V) transformer, 1x2 fine perforation grille with sub-plate and enclosure. For commercial paging and background music.