Search

From XLR Mic cables, to BNC video line, to CAT5, to SPEAKON, the Sescom CT1 tests 'em all and then some! This compact and low cost cable tester is feature rich and an invaluable problem-solving tool for the live sound professional, studio recording engineer or systems integrator. The unit handles any combination of XLR, Phone, Phono, and speakON connectors, as well as DIN, Ethernet, and even multiple TRS cable sizes. The Sescom CT1 can test each contact on your cables via its selector knob with illuminated LEDs providing affirmation on continuity and ground status. The tester includes test leads for testing continuity on other cable types and it runs on an included 9 volt battery. Its heavy duty metal construction is designed to last for years of reliable cable diagnoses.

The P-912MK2 Power Amplifier delivers up to 120 watts of output power. The power amplifier has an input port to accept one plug-in module.

The Blustream DA44AU is a four input / four output Dante® digital audio converter. The DA44AU allows any non-Dante® audio source such as mixing consoles, amplifiers, computers and Blustream Matrix / distribution products to be connected as an audio source within a Dante® network, as well as converting a Dante® signal back to an analog audio signal. The DA44AU supports both balanced and unbalanced audio as well as microphone line level inputs inc. 48V phantom power. The DA44AU supports AES67 RTP audio transport.

Features:

• Features 4 x analog audio inputs that are converted to a Dante® compatible signal
• Features conversion of 4x Dante® signals to analog audio outputs
• Analog audio inputs support both balanced and unbalanced audio + MIC line level signals
• MIC line level supports 48V phantom power
• Supports 44.1, 48 & 96kHz sample rates @ 24-bit
• Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)
• Independent input gain / output volume settings per channel
• Supports AES67 RTP audio transport

Specifications

• Audio Input Connectors: 12-PIN Phoenix connector (4ch balanced / unbalanced analog audio / MIC)
• Audio Output Connectors: 2 x RJ45, female (1Gb Dante® network), 12-PIN Phoenix connector (4ch balanced /
• unbalanced analog audio / MIC)
• Casing Dimensions (W x H x D): 120mm x 23mm x 34m without feet
• Operating Temperature: 32°F to 104°F (-5°C to +55°C)
• Storage Temperature : -4°F to 140°F (-25°C to +70°C)
• Power Supply: 12V/1A DC

Included

• 1x DA44AU
• 1x 12V/1A DC Power Supply
• 1x Mounting Kit
• 1x Quick Reference Guide

Description

Equipped with the same ESS Sabre32 Ultra™ DAC Technology found in audio interfaces costing thousands, the M4 delivers an astonishing 120 dB Dynamic Range on its main outputs. ESS converters also drive the headphone output, which rivals dedicated headphone amplifiers costing hundreds. Ultra-clean preamp circuits produce a measured -129 dBu EIN on the mic inputs. Capture and monitor your audio with pristine clarity.

SpeedThe M4 provides best-in-class speed for monitoring live inputs (mic, guitar or keyboard) through your computer, thanks to MOTU's expertly engineered USB drivers, which deliver class-leading, ultra-low 2.5 ms Round Trip Latency (at 96 kHz with a 32 sample buffer).

MeteringWhen recording and mixing, nothing is more critical than achieving optimum levels. The M4 is the only audio interface in its class with a full color LCD featuring clear, detailed level meters for all inputs and outputs. Enjoy professional-level volume control and feedback to get your sound just right.

LoopbackThe M4 driver provides convenient loopback channels to your host computer, so you can easily combine computer audio with live mics and/or guitar inputs to stream the combined mix to Youtube or your favorite podcasting platform in real time. Streaming and podcasting has never been easier and better-sounding!

Features

• ESS Sabre32 Ultra™ DAC technology for superb analog sound
• The same converter technology used in audio interfaces costing thousands
• Measured 120 dB dynamic range on outputs
• Measured -129 dBu EIN on mic inputs
• ESS-driven headphone output

Specifications

• Technical Specifications
  • Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
  • Mic/Line/Guitar: 2 x XLR/TRS "combo jack" mic/line/Hi-Z guitar inputs
    Independent preamp gain, 48V phantom power and monitor switch for each input
  • Analog Inputs: 2x 1/4" line in
  • Analog Outputs:
    4x 1/4" TRS line out (balanced, DC coupled)
    4x RCA (unbalanced) analog out (mirrored)
    1x 1/4" TRS stereo headphone
  • Computer I/O: 1x USB-C (compatible with USB Type A) 2.0 audio class compliant
  • MIDI I/O:
    /1x MIDI IN
    1x MIDI OUT
    16 MIDI channels to/from computer host
  • Headphone: 1x 1/4" TRS stereo phone
  • Phantom Power: 2x individual +48V
  • Front Panel:
    1x 1/4" TRS headphone output
    2x XLR/TRS combo inputs
    1x Potentiometer: monitor vol
    1x Potentiometer: phone vol
    1x Potentiometer: input monitor mix
    2x Potentiometer: mic/line/guitar input gain
    5x Switches: (2) 48V, (2) MON and (1) 3-4
    160x 120 pixel full-colored LCD with input and output level meters
  • Power: Bus-powered through USB
  • Dimensions (WxHxD, enclosure only): 8.25 x 4.25 x 1.75" (20.955 x 10.8 x 4.5cm)
  • Weight: 1.55Lbs (0.7kg)
• System Requirements
  • Mac System Requirements:
    1 GHz Intel-based Mac or faster
    2 GB RAM; 4 GB or more recommended
    macOS version 10.11 or later
    Available USB port
    A large hard drive (at least 500 GB for recording)
  • Windows System Requirements:
    1 GHz Pentium-based PC compatible or faster
    2 GB RAM; 4 GB or more recommended
    Windows 7, 8 or 10
    Available USB port
    A large hard drive (at least 500 GB for recording)
  • Class-Compliant Support:
    USB audio class compliant for plug-and-play operation on Mac or iOS (no driver required)
  • Included Software:
    MOTU Performer Lite
    Ableton Live 10 Lite
    6GB of loops and sounds from Big Fish Audio, LucidSamples, Loopmasters and MOTU
  • Operating Systems: macOS 10.11 or later; Windows 7 or later
• Analog I/O
  • Line Output: 1/4" TRS, balanced, tip hot, 120dB, -110dB, +16dBu
  • Line Input: 1/4" TRS, bal/unbal, tip hot, 115dB, -106dB, +18dBu (at minimum gain)
  • Mic input: XLR, balanced, pin 2 hot, 115dB, -129dBu EIN, +10dBu (at minimum gain)
  • Phones: 1/4", TRS stereo, 115dB, -110dB, +12.5dBu

Equipped with the same ESS Sabre32 Ultra™ DAC Technology found in audio interfaces costing thousands, the M2 delivers an astonishing 120 dB Dynamic Range on its main outputs. ESS converters also drive the headphone output, which rivals dedicated headphone amplifiers costing hundreds. Ultra-clean preamp circuits produce a measured -129 dBu EIN on the mic inputs. Capture and monitor your audio with pristine clarity.

The M2 provides best-in-class speed for monitoring live inputs (mic, guitar or keyboard) through your computer, thanks to MOTU's expertly engineered USB drivers, which deliver class-leading, ultra-low 2.5 ms Round Trip Latency (at 96 kHz with a 32 sample buffer).

Metering
When recording and mixing, nothing is more critical than achieving optimum levels. The M2 is the only audio interface in its class with a full color LCD featuring clear, detailed level meters for all inputs and outputs. Enjoy professional-level volume control and feedback to get your sound just right.

Loopback
The M2 driver provides convenient loopback channels to your host computer, so you can easily combine computer audio with live mics and/or guitar inputs to stream the combined mix to Youtube or your favorite podcasting platform in real time. Streaming and podcasting has never been easier and better-sounding!

Features:

• ESS Sabre32 Ultra™ DAC technology for superb analog sound
• The same converter technology used in audio interfaces costing thousands
• Measured 120 dB dynamic range on the outputs
• Measured -129 dBu EIN on mic inputs
• ESS-driven headphone output

Specifications:

• Technical Specifications
• Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
• Mic/Line/Guitar Inputs:
  2 x XLR/TRS "combo jack" mic/line/Hi-Z guitar inputs
  Independent preamp gain, 48V phantom power and monitor switch for each input
• Analog Outputs:
  2x 1/4" TRS line out (balanced, DC coupled)
  2x RCA (unbalanced) analog out (mirrored)
  1x 1/4" TRS stereo headphone
• Computer I/O: 1 x USB-C (compatible with USB Type A) 2.0 audio class compliant
• MIDI I/O:
  1x MIDI IN
  1x MIDI OUT
  16 MIDI channels to/from computer host
  Headphone: 1x 1/4" TRS stereo phone
  Phantom Power: 2x individual +48V
• Front Panel:
  1x 1/4" TRS headphone output
  2x XLR/TRS combo inputs
  1x potentiometer - monitor vol
  1x potentiometer - phone vol
  2x potentiometer - mic/instr input gain
  4x switches - (2) 48V and (2) MON
  160x 120 pixel full-colored LCD with input and output level meters
• Power: Bus-powered through USB
• Dimensions (WxDxH, enclosure only): 7.5 x 4.25 x 1.75" (19.05 x 10.8 x 4.5cm)
• Weight: 1.35Lbs (0.61kg)
  
  System Requirements
• Mac System Requirements:
  1 GHz Intel-based Mac or faster
  2 GB RAM; 4 GB or more recommended
  macOS version 10.11 or later
  Available USB port
  A large hard drive (at least 500 GB for recording)
• Windows System Requirements:
  1 GHz Pentium-based PC compatible or faster
  2 GB RAM; 4 GB or more recommended
  Windows 7, 8 or 10
  Available USB port
  A large hard drive (at least 500 GB for recording)
• Class-Compliant Support: USB audio class compliant for plug-and-play operation on Mac or iOS (no driver required)
• Included Software: MOTU Performer Lite, Ableton Live 10 Lite, 6GB of loops and sounds from Big Fish Audio, LucidSamples, Loopmasters and MOTU
• Operating Systems: macOS 10.11 or later; Windows 7 or later
  
  Analog I/O
• Line Output: 1/4" TRS, balanced, tip hot 120dB, -110dB, +16dBu
• Mic Input: XLR, balanced, pin 2 hot, 115dB, -129dBu EIN, +10dBu (at minimum gain)
• Phones: 1/4", TRS stereo 115dB, -110dB, +12.5dBu

The P-924MK2 Power Amplifier delivers up to 240 watts (Direct)/220 watts (Transformer) of output power. The power amplifier has an input port to accept one plug-in module.

Making a great audio recording for a podcast is easy, if you have the right broadcasting equipment. HamiltonBuhl® has specially-designed the PCAST4 Podcasting Kit to provide excellent sound quality for recording music, singing and podcasting needs.

This Kit Includes:

(1) USB Omnidirectional/Cardioid Podcasting Microphone with Desktop Stand. This portable USB Type-C Multi-functional Microphone, excellent for voice and instruments, has a built-in switch for Omnidirectional and Cardioid polar patterns. This mic provides the versatility and flexibility needed to do quality broadcasts, from nearly any location, with clear, rich sound. Compatible with Windows or Mac.

• USB plug-and-play
• Rich, clear sound quality
• Omnidirectional and cardioid option
• Microphone adjusts to any angle
• Headphone Volume Control Knob
• Gain Control Knob
• Removable base

(1) Round Microphone Windscreen/Pop Filter This double-nylon layer Microphone Windscreen/Pop Filter provides noise-protection, helping you get better audio recordings. The 360° flexible gooseneck arm allows precise positioning and the swivel mount is easy to install.

• Windscreen diameter: 5.9"
• Gooseneck Holder Length: 14.6"
• Adjustable C Clamp: affixes securely to the mic stand

(1) Folding Sound Isolation Shield This Sound Isolation Shield makes clean, controlled, and noise-free recordings, reducing unwanted room noise. Great for home recording studios, podcasts, YouTube recordings, music recordings, and more. Compact, portable, lightweight, foldable design. Kit includes the stand and base for the Isolation Shield.

Kramer’s C−MGMA/MGMA is a micro sized, high−performance cable for computer graphics and audio with slim molded 15−pin HD and 3.5mm connectors at both ends. This micro coax cable is thin and flexible and is an excellent choice for connecting computer graphics video and audio signals between computers or video scalers and plasma, LCD or other popular display technologies.

• Quality Construction — Constructed using micro coax conductors and outer diameter of 6.0mm (0.236in). The 15–pin HD connectors are specially designed with a small profile to fit any high density installation and all 15 pins are passed through the cable. The audio leads are 61.0cm (24in) long at one end and 20.3cm (8in) on the other end.
• Multiple Applications — Ideal for video presentations, home theater and any installation in tight spaces. Use these cables with our table solutions for your convenience and efficiency.
• All Pins Connected for DDC2 and EDID Support.

Kramer’s C−GMA/GMA is a high−performance cable with male 15−pin HD and 3.5mm stereo audio connectors at each end. It is perfect for computer graphics video to display installations that require an audio signal as well.

• Quality Construction — Constructed using our rugged and flexible 14–conductor cable.
• Easy Connection — Pre–terminated with molded 15–pin HD connectors (male to male), gold–plated pins and thumbscrews and a 3.5mm stereo mini jack.
• Easy Installation — Audio leads extend 24in (61cm) beyond the 15–pin HD head at one end, and 20cm (8in) at the other.
• All Pins Connected for DDC2 and EDID Support.

The Ocean Matrix 11IPHM0004 wall plate receiver completes the HDMI extender system when used with the Ocean Matrix 10HMIP0005. The system utilizes H.264 compression to extend video resolutions up to 1080p@60hz over Cat5e/6. The 11IPHM0004 also houses a built-in HDMI audio extractor breaking out the audio to a 3.5mm mini connector. This is perfect for feeding front of house audio systems or conference audio systems.

H.264 compression makes the 10HMIP0005 & 11IPHM0004 a network friendly device as it uses less bandwidth to transmit over LANs. The system supports cable runs up to 394 feet in point-to-point setups but it may also be used to drive a network of receivers and displays using an Ethernet switch.

The wall plate form factor coupled with its HDMI extender capabilities make it the perfect fit for classrooms and conference rooms in video projector applications as well as huddle spaces and similar collaborative environments.

This unit can be powered using the included power adapter or using a PoE source such as a PoE Ethernet Switch or PoE injector. When used with a transmitter, both units need to be powered by each unit's power adapter or a PoE power source.

Features:

• Convenient Single Gang Wall Mount Design
• LED HDMI Indicator Light
• Low Bandwidth
• Supports Dynamic Host Configuration Protocol (DHCP)
• Cascade Capability
• Analog 2.0 Audio Extraction
• HDCP & TCP/IP, PoE 802.3 Compliant
• Silver Aluminum Wall Plate
• Certifications: CE, FCC

Specifications:

• Protocol H.264 encoder over TCP/IP
• Transmission Distance: 394 feet/120m over Cat5e/6
• Video format 480i/480p/576i/576p/720p/1080i/1080p@60HZ
• Audio format LPCM, Audio sampling rate 48KHZ
• Streaming Bit Rate 15Mbps
• Power Consumption: 3W
• Dimensions: Wall Plate - 4 1/2 x 2 3/4 x 5/64 inches / Transmitter - 4 1/8 x 1 7/8 x 1 ½ inches
• Weight: 4.59 oz

Item Includes:

• 1- Wall Plate, 1-5VDC/1A Power Supply with Mini-Phoenix Connector, 4-White 5/8 inch Screws, 2- ¬ inch Screws, 1-Mini-Phoenix Connector

Warranty:

• 1 Year

Convenient connections plus a stereo Bluetooth channel add true versatility.

The Alesis MultiMix 10 Wireless is redefining the rack mount mixer category. Compact and complete, the MultiMix 10 Wireless delivers ten-channel mixing in a neat 3U package that is perfect for smaller clubs and venues, houses of worship, as well as mobile/traveling systems. The MultiMix 10 Wireless benefits from an array of easily accessible front panel jacks that enhance the versatility and usefulness of this generously equipped mixer. Topping off the feature list is a channel dedicated to receiving the stereo playback from any Bluetooth device. The MultiMix 10 Wireless is a new breed of rack mount mixer.

ALL ARE WELCOME

The MultiMix 10 Wireless provides a wealth of inputs to accommodate nearly any audio input. Channels 1-4 are ideal for vocals or acoustically mic’ed instruments, direct boxes, and more. Each provides an XLR mic input with available phantom power; a balanced 1/4" TRS line input, plus a TRS 1/4" insert jack for incorporating additional effects or working with a second mixer. Channels 5-8 have been set as stereo pairs, offering 1/4" left and right inputs. These channels are ideal for stereo sources such as a keyboard, electronic drum set, drum machine, external mixer, etc. Channels 7-8 also provide left and right RCA inputs.

WIRELESS WONDER

Stream a stereo audio signal from any Bluetooth device to Channels 9-10 of the MultiMix 10 Wireless. Single-button pairing keeps it simple. Now you can easily play music between sets, stream audio from a computer during a multimedia presentation, or even play a track from a patron’s smartphone for satisfying that “special request.” The articulating Bluetooth antenna delivers optimum reception.

JACK ATTACK!

An additional set of front panel jacks go above and beyond what most rack mixers offer to set your new MultiMix 10 Wireless mixer apart form the crowd in both convenience and functionality. No more snaking cables from front to back; no more reaching around and guessing; no more un-mounting the mixer to get at the jacks you need. To begin with, Channels 1 and 2 are equipped with XLR+1/4" combo inputs that override the rear jacks. Simply plug in a mic for making house announcements, adding a new source, patching in a sampler, or whatever you need. The stereo 1/8" external input allows instant access to the dedicated Bluetooth channel, providing a quick way to add in any stereo, handheld, or mobile device. Finally, the stereo 1/8" front panel output provides the master output signal—taken before the master fader—to deliver an efficient way to capture and record a live mix.

MAXIMUM MIXING

Using the MultiMix 10 Wireless is easy and intuitive. Each single and stereo-paired channel offers a trim knob, peak LED, and a smooth-travelling 60mm fader for attaining the best signal level. In addition, there is a two-band EQ and pan for shaping the sound and creating a great mix. There are two aux send knobs per channel for creating a separate monitor mix, using an external global effect, etc. Aux 1 is set to pre-fader and Aux 2 is post-fader for maximum versatility.

Dual multi-segment LED meters and a Master output fader allow you to easily monitor and control your levels. Left and right main outputs are equipped with balanced 1/4" TRS jacks—ideal for extended cable runs. The left and right monitor outs provide unbalanced 1/4" jacks. There is a separate headphone output on the front panel, with a dedicated volume control.

Features:

• Convenient front panel jacks add versatility
• Space-saving 3U rackmount design is perfect for venues and mobile rigs
• Bluetooth streaming with simple single-button pairing
• Articulating Bluetooth antenna for optimum reception
• 4 high-gain mic/line preamps with inserts
• 2-band high and low shelving EQ on every channel ?
• Pre-fader and post-fader aux sends; stereo aux return

Specifications:

• INPUTS:
  • Channels 1-4 (mono):
    • Mic: XLR with switchable phantom power
    • Line: 1/4" Mono
    • Insert: 1/4" TRS
    • Front: XLR+1/4" combo jacks (Channels 1 and 2 only—overrides rear jacks)
  • Channels 5-6 (stereo pair):
    • Line: 1/4" Left, Right
  • Channels 7-8 (stereo pair):
    • Line: 1/4" Left, Right
    • RCA: Left, Right
  • Channels 9-10 (stereo pair):
    • Bluetooth: Stereo Streaming In
    • Ext: 1/8" Stereo (front panel)
    • Aux Return: 1/4" TRS Balanced Left, Right
      
      
• OUTPUTS:
  • Main: 1/4" TRS Balanced Left, Right
  • Monitor: 1/4" Left, Right
  • Aux Send 1: 1/4"
  • Aux Send 2: 1/4"
  • Headphones: Stereo 1/4"
  • Ext: 1/8" Stereo (front panel)
    
    
• DESIGN:
  • 3U Rackmount chassis
  • Detachable power cable

Item Includes:

• MultiMix 10 Wireless
• Power Supply
• Quickstart Guide
• Safety & Warranty Manual

The Datavideo SE-500HD a multi-format live event AV switcher with scaling on every input, built-in audio mixer, and exceptional 4:4:4 10-bit 1080p video quality. Its portable & compact design with easy-to-use professional features makes it ideal for breakout rooms, corporate events, and any live event production. Four scaled HDMI inputs and two HDMI outputs allow users to mix and match video resolutions and connect a variety of video sources that include laptops, tablets, and cameras without the need for video converters.

Don't let the SE-500HD fool you with its compact size and affordable price. It is loaded with features such as Lumakey for graphic overlays, split screen for side by side views of the presenters, and PIP (picture-in-picture) for PowerPoint presentations. Plug in microphones and other audio sources directly into the SE-500HD and use the built-in audio mixer to simplify your workflow and get professional sound. Dedicated buttons make it user friendly and easy for anyone to operate it like a pro. Professional features, compact all-in-one design and affordable price point makes the SE-500HD ideal for any live presentation.

Features:

• 4 Channel HD/SD Digital Video Switcher
• Supports up to Full HD 1080p
• 10-bit processing
• Video Input: 4x HDMI
• Video Output: 2x HDMI (1x Multiview | 1x Program)
• Audio Input: 1x Stereo RCA | 2x Microphone
• Audio Output: 1x Stereo RCA | 1x Stereo headphone mini Jack
• Audio Mixer: 2x Mic | 1x Stereo RCA | 1x internal Digital embedded
• Audio LED Meter
• Transitions: Wipe, Mix & Cut
• Keyer: Lumakey
• Picture-in-picture and split functions
• Tally Output

Specifications:

• Video Standard: Full HD & SD
• Video Format: 1080p 50/59.94/60Hz; 1080i 50/59.94/60Hz; 720p 50/59.94/60Hz; 576i 50Hz; 480i 59.94Hz
• Video Processing HDMI: YUV 4:4:4 10 bit, RGB: 4:4:4
• Video Input: 4x HDMI
• Computer Graphic Interface: 4 via HDMI
• Video output: 2x HDMI (1 is MV, 1 is PGM)
• Built-in Multi-view monitoring out: HDMI
• Audio input: 1x Stereo RCA (L/R); 2x Mono Microphone; De-embedded Digital Audio (2 CH)
• Audio output: 1x Stereo RCA (L/R); 1x Stereo headphone (Mini Jack with volume control); Embedded Digital Audio (2 CH)
• Embedded audio support: embedded 2-CH digital/analogue audio
• Effects: FTB, Cut, Wipe with border
• Sync / Reference In/Out: Built-in Genlock (internal)
• Tally Output: 1x D-sub 15pin, dual color
• Chassis: Unibody
• Power: DC 12V 29W
• Accessory: CB-60/61/62 (30/50/100m)

Item Includes:

• 1x SE-500HD product
• 1x AD Switch DC 12V with AC Cord
• 1x Thank You Card

The Muxlab 500467 is an HDMI to USB 3.0 Video Capture & Streamer (500467) allows the user to record from HDMI video sources to a PC over USB 3.0. The unit supports an HDMI In port for the source and HDMI Loop Out for a monitor. The 500467 is capable of connecting to a 4K/60 source and will stream at up to 1080p/60 over the USB 3.0 port to a PC or similar device to record and/or send the video to a broadcasting service such as YouTube, Facebook, and other broadcasting services. The device is compatible with OBS Studio, AMCap, etc., and supports a variety of HDMI sources such as Cameras, Game Consoles, Media Players, and many others.

The unit supports an Audio In port for a microphone which is automatically mixed with the HDMI audio, and an Audio Out port for headphones or active speakers.

Applications:
Home video recording
Video game capture
Security and traffic video recording
Education/classroom systems
Broadcasting to YouTube and Facebook

Features:

• Capture video at up to 4K/60, and stream via USB 3.0 to a PC at up to 1080p/60
• Supports UVC1.0
• Supports downscaling from 4K/60 to 1080p/60
• HDMI Loop Out port to connect to a display
• Supports H.264
• Auto detects video format
• Audio In for a microphone, and Audio Out for headphones or active speakers
• Microphone & source audio mixing
• Supports Windows 7/8.1/10, Mac and Linus OS
• Compatible with OBS Studio, AMCap, etc.
• Record from HDMI sources such as Cameras, Game Consoles, Media Players, etc.

Specifications:

• Environment: HDMI 1.3, UVC1.0
• Devices: Cameras, Computers, Game Consoles, Media Players and other HDMI sources
• Transmission: Transparent to the user
• Bandwidth: Up to 350 Mbps (over USB)
• Signals: HDMI 1.3 protocol, UVC1.0
• Connectors - Cables not included:
  Two (2) HDMI receptacles (HDMI IN and HDMI Loop Out)
  One (1) USB 3.0 Type A Connector (for Streaming to a PC)
  Two (2) 3.5mm jacks for Microphone and Headphone
• Source Resolution: From 640x480 to 4K @ 60Hz (4:4:4)
• Recording Resolution: Up to 1080P @ 60Hz
• Video Coding Format: H.264 (Video)
• Audio Signal: 2 channel 16bit PCM (via HDMI input interface) and 3.5mm 2 channel analog audio input
• Power Supply: One (1) 110-240V/5VDC @ 2A power supply
• Consumption: 3W (max)
• Temperature:
  Operating: 32° to 104°F (0° to 40°C)
  Storage: -4° to 140°F (-20° to 60°C)
• Humidity: 20 to 90% (non-condensing)
• Enclosure: Metal
• Unit Dimensions: 4.1 x 2.7 x 0.9" (105 x 68 x 24mm)
• Shipping Weight: 0.88Lbs (0.40kg)
• Compliance
  Regulatory: FCC, CE, RoHS
  Flammability: 94V0

Warranty:

• 2 Year Warranty

VS−411UHD is an automatic switcher for 4K@60Hz (4:2:0) HDMI and analog audio signals. VS−411UHD automatically switches one of four HDMI inputs to a predefined or last connected input whenever the currently active video signal is interrupted or whenever a higher−priority video signal is detected. They also support Kramer’s Step−in over HDMI technology.

• Max. Data Rate — 8.91Gbps (2.97Gbps per graphic channel).
• Max. Resolution — 4K@60Hz (4:2:0).
• Compliance — HDCP and DVI 1.0.
• Deep Color, 3D, up to 7.1 uncompressed audio channels, ARC (supported on Input 1 only).
• Features Kramer reKlocking™ Technology — Rebuilds the digital signal to travel longer distances.
• HDTV Compatible.
• Customized Audio Output — Embed a companion analog audio signal into its HDMI input signal, de–embed the audio from the HDMI input and route it to the balanced stereo audio line out, de–embed HDMI ARC from the output and route it to the balanced stereo audio line out, or route the analog audio inputs directly to the stereo audio line out.
• Automatic Video Input Detection & Selection.
• Auto Power Off — When no HDMI input for 10 seconds (selectable).
• Step–In Over HDMI Technology.
• Active Switching — Selectable manual or fast auto switching according to last connected or preset priority.
• Selectable HDCP Switching.
• EDID Configuration Options.
• Default EDID.
• Contact Closure — For remote manual switching override.
• Lock Button
• Firmware Upgrade — Over RS–232, mini–USB.
• Software Support — Protocol 3000, EDID Designer, K–Upload via RS–232.
• Varied Control Options — Front panel buttons, contact closure, IR, RS–232 Protocol 3000.
• Easy Installation — Compact MegaTOOLS® fan–less enclosure for surface mounting or side–by–side mounting of 2 units in a 1U rack space with the recommended rack adapter.

The VS−211UHD is an automatic switcher for 4K@60Hz (4:2:0) HDMI and analog audio signals. The VS−211UHD automatically switches one of two HDMI inputs to a predefined or last connected input whenever the currently active video signal is interrupted or whenever a higher−priority video signal is detected.

• Max. Data Rate — 8.91Gbps (2.97Gbps per graphic channel).
• Max. Resolution — 4K@60Hz (4:2:0).
• Compliance — HDCP and DVI 1.0.
• Deep Color, 3D, up to 7.1 uncompressed audio channels, ARC (supported on Input 1 only).
• Features Kramer reKlocking™ Technology — Rebuilds the digital signal to travel longer distances.
• HDTV Compatible.
• Customized Audio Output — Embed a companion analog audio signal into its HDMI input signal, de–embed the audio from the HDMI input and route it to the balanced stereo audio line out, de–embed HDMI ARC from the output and route it to the balanced stereo audio line out, or route the analog audio inputs directly to the stereo audio line out.
• Automatic Video Input Detection & Selection.
• Auto Power Off — When no HDMI input for 10 seconds (selectable).
• Step–In Over HDMI Technology.
• Active Switching — Selectable manual or fast auto switching according to last connected or preset priority.
• Selectable HDCP Switching.
• EDID Configuration Options.
• Default EDID.
• Contact Closure — For remote manual switching override.
• Lock Button.
• Firmware Upgrade — Over RS–232, mini–USB.
• Software Support — Protocol 3000, EDID Designer, K–Upload via RS–232.
• Varied Control Options — Front panel buttons, contact closure, IR, RS–232 Protocol 3000.
• Easy Installation — Compact MegaTOOLS® fan–less enclosure for surface mounting or side–by–side mounting of 2 units in a 1U rack space with the recommended rack adapter.

The VS−211HA is a high−performance automatic standby switcher for HDMI video and unbalanced stereo audio signals. The VS−211HA can be used as a manual 2x1 switcher or automatic switcher. The switcher uses a priority input or last connected input.

AFM−20DSP is a member of the Kramer XSPerience family of DSP products. AFM−20DSP is an advanced, professional audio matrix switcher with 20 analog ports that can be configured as inputs or outputs according to preset I/O configurations. AFM−20DSP includes multi−channel DSP, built−in 2x60W @ 8Ω and 1x120W @ 70V / 100V power amplifier, 4x4 Dante interface, HDMI embedding and de−embedding, and S/PDIF. The comprehensive and user−friendly graphic interface makes configuring every detail of your audio system intuitive and easy.

• Advanced Audio Matrix Switcher — Professional, studio grade signal conversion technology, Including the latest generation 32–bit advanced Digital Analog Converter architecture to achieve excellent dynamic performance and improved tolerance to clock jitter. Maintains the quality of the original audio signal with selectable sampling rates up to 96 kHz. Flat frequency response, unmatched sonic performance, excellent signal to noise ratio, and extraordinarily low distortion levels.
• Wide Range of I/O Formats — Includes 20 analog ports, 4x4 Dante interface, HDMI input and output, and S/PDIF input and output.
• Multi–Channel Processing — Provides DSP (Digital Sound Processing) that enables simultaneous processing of all input and output signals.
• Built–in Power Amplifier — 2x60W @ 8Ω and 1x120W @ 70V / 100V power amplifier.
• Maximum Flexibility — Customize the analog port configuration: use the default 12 x 8 I/O matrix configuration or select from one of the many other preset I/O configurations. Route any input to any output, even between different formats (for example, route an analog input to an S/PDIF output). Control volume and DSP per port. Route any of the ports to the power amplifier.
• Simple and Powerful Maestro Room Automation — Intuitive user interface enables you to fully automate your meeting room elements. Configure lights, shades, devices and more to be activated by an extensive range of triggers, including input/output connectivity, routing, and button pressing. By minimizing user intervention, Maestro room automation saves meeting prep time and minimizes human error before presentations.
• Intuitive and Comprehensive Configuration and Control — Via a powerful, user–friendly graphic interface, set volume (gain and attenuation) and DSP per input; execute routing and select line in, mic in, phantom power or line out on each port; configure master level and more. Control signal routing, volume and other basic settings using API commands via RS–232 communication transmitted by a PC, touch screen system or other serial controller.
• Audio De–embedding — De–embeds the audio signal from the HDMI input for routing to any of the outputs or for routing to the loop output.
• Programmable — Supports up to 10 global presets per I/O configuration plus 10 mixer snapshot presets.
• Easy, Cost–Effective Maintenance — LED indicators for main power, line in/out, mic in, clipping, power amp, Dante sync, and HDMI, enable easy local maintenance and troubleshooting. Local firmware upgrade via the USB type–A port ensures lasting, field–proven deployment.
• Easy Installation — 19” enclosure for rack mounting a unit in a 1U rack space with included rack ears and universal 100–240V AC power connection.

The VP−774AMP is a high−performance presentation switcher and scaler. It accepts one of nine inputs: one DisplayPort (DP), one composite video, two computer graphics, one 3G HD−SDI and four HDMI signals. It scales the video, embeds the audio, and simultaneously outputs the signal to two identical HDMI, one HDBaseT and one 3G HD−SDI output, together with S/PDIF and balanced stereo audio outputs. The unit also includes an audio amplifier and speaker outputs.

• K–IIT XL™ Picture–in–Picture Image Insertion Technology — Ultra–stable picture–in–picture, picture–and–picture, and split screen capability. Any video source can be inserted into or positioned next to any other video source with full window positioning and sizing controls.
• Kramer’s PixPerfect™ Scaling Technology — Kramer’s precision pixel mapping and high quality scaling technology. High–quality 3:2 and 2:2 pull down de–interlacing and full up — and down–scaling of all video input signals.
• State–of–the–Art Video Processing Technology — For highest quality de–interlacing, noise reduction, and scaling performance for both standard–definition and high–definition signals.
• Ultra–Fast Fade–Thru–Black (FTB™) Switching — Video switching transitions are clean and ultra fast. The video fades to black and the new input fades from black for smooth, glitch–free switching. The output signal provides constant sync so the display never glitches.
• HDCP Compliant — The HDCP (High Definition Content Protection) license agreement allows copy–protected data on the HDMI input to pass only to the HDMI output.
• Advanced EDID Management — Per input; analyzes the EDID of a selectable Master connection to one of the outputs.
• Mass Notification Emergency Communication System (MNEC) — Activates a national or campus–wide notification, immediately displayed when an emergency situation develops. It uses automatic text overlaying, either via a crawler or a full screen cover up, as well as an optional audio alert.
• Max. Data Rate — 6.75Gbps (2.25Gpbs per graphic channel).
• Multi–Standard SDI Support — SDI (SMPTE 259M), HD–SDI (SMPTE 292M) and 3G HD–SDI (SMPTE 424M).
• Scaled Outputs — 2 HDMI, 1 HDBaseT, 1 3G HD–SDI (all outputs work simultaneously).
• Output Resolutions — HDTV and computer graphics up to 2K and 1080p/UXGA with selectable refresh rates.
• HDMI Deep Color Support — For all inputs and outputs.
• Luma Keying — Via PIP window.
• Vertical Keystone Operation.
• Built–in Proc–Amp — With enhanced functions such as color correction, gamma and dither.
• Multi–Standard Video Support — NTSC (3.58/4.43), PAL (M/N/60) and SECAM with advanced de–interlacing options.
• Built–in Time Base Corrector — Stabilizes unstable video sources.
• Picture Zooming — Both on main and PIP window from 100% to 1600%, including separate V and H sharpness control.
• Input and Output Colorspace Control.
• Audio Support — Unbalanced stereo audio inputs, with two microphone inputs; digital stereo and balanced stereo outputs; input and output audio level adjustment.
• Selectable Microphone Talkover or Mix Modes.
• Microphone Inputs — 2 dynamic or condenser (with 48V phantom voltage).
• Audio Amplifier & Speaker Output — 2x10W.
• Automatic Detection and Selection of Embedded Audio — Automatically outputs the signal from the HDMI and DP embedded audio inputs or performs an analog takeover to output the respective analog audio input.
• Range — Up to 130m (430ft) normal mode; up to 180m (590ft) ultra mode (1080p @60Hz @24bpp) when using BC–HDKat6a cables.
• On–Screen Display (OSD) — For easy setup and adjustment, accessible via the IR remote control and via the front–panel buttons.
• Built–in Web Page Server.
• Non–Volatile Memory — Saves final settings.
• Firmware Upgrades — Via Ethernet and RS–232.
• Flexible Control Options — Front panel buttons, OSD (on–screen display) via front panel buttons or IR remote (remote control included), embedded Web server.
• Port Tunneling — A bidirectional RS–232 interface where simple control commands and data can flow in both directions from a controller to the VP–773 via the Ethernet, allowing status requests and control of the destination unit
• Selectable Power Save Modes — For efficient energy use.
• Worldwide Power Supply — 100–240V AC.
• Standard 19" Rack Mount Size — 1U. Rack ears included.