Kramer

KC−Virtual Brain1 is a hardware platform with 1 instance of Kramer BRAINware software already installed on the device. KC−Virtual Brain1 is designed to maximize the features and benefits of Kramer BRAINware for controlling 1 standard space (e.g. a standard space could include a scaler, monitor, lighting system, touch panel and keypad).

Kramer BRAINware is an enterprise−class, revolutionary, user−friendly, software application that enables you to execute all your room control actions straight from a computer without installing a physical Brain between the user interface and the controlled devices. Using the power of Kramer Control cloud–based control & space management platform, Kramer BRAINware enables you to operate multiple devices over Ethernet such as scalers, video displays, audio amplifiers, Blu−ray players, sensors, screens, shades, door locks, and lights.

Designing a system was never easier, with Kramer Control's intuitive drag & drop Builder. Install, configure and modify your control system without any prior knowledge in programming.

• Simplified AV Installation — Control a room without installing a physical Brain.
• Format Conversion — Use Kramer FC family of control format converters to enable controlling almost any device.
• Fully Customizable UI — Using Kramer Control, easily personalize your control interface any way you like.
• Space Controller — Controls any AV device with its corresponding logic.
• Simple Configuration — Install and start using the platform in minutes with easy configuration.

VS−622DT is an all−in−one 4K@60Hz (4:2:0) presentation system with 6x2 HDMI/HDBaseT matrix switching, control gateway, PoE, power amplifier, and Maestro room automation. The unit reclocks and equalizes the signals and can route any input to the HDMI or the HDBaseT output or to both outputs simultaneously. It supports resolutions up to 4K@60Hz (4:2:0) and WUXGA.

VS−622DT is also a control gateway that can send control signals over the Ethernet or HDBT LINE with control ports that include: RS−232, four IR, two GPI/O, and two relays to control a wide variety of AV devices. The unit provides power to PoE compatible devices.

• Max. Data Rate — 10.2Gbps (3.4Gbps per graphics channel).
• Max. Resolution — 4K@60Hz (4:2:0) and WUXGA.
• HDBaseT Extension Reach — Up to 100m at 4K @60Hz (4:2:0), up to 130m (430ft) at full HD (1080p @60Hz 36bpp), up to 180m (590ft) at ultra–mode and full HD (1080p @60Hz 24bpp). For optimum range and performance, use recommended Kramer cables.
• Simple and Powerful Maestro Room Automation — Intuitive user interface enables you to fully automate your meeting room elements. Configure lights, shades, devices and more to be activated by an extensive range of triggers, including scheduling, input/output connectivity, routing, and button pressing. By minimizing user intervention, Maestro room automation saves meeting prep time and minimizes human error before presentations.
• Provides Power (PoE) on All HDBaseT Ports to Compatible Devices.
• Power Amplifier — 1x120W @70V/100V & 2x60W @4/8Ω with line level output, fast swapping between two de–embedded audio sources and individual gain for each source.
• Audio De–embedding (Extracting) — The user selects the audio signals from 2 of the 6 inputs (2 HDBaseT + 4 HDMI) to be de–embedded. The de–embedded signals are output through the two balanced analog audio outputs. In addition, one of the de–embedded audio signals can be output to the power amplifier.
• HDBaseT Data Tunneling — Supports Ethernet tunneling, as well as bidirectional tunneling for RS–232 and IR control.
• HDCP Compliant.
• HDMI Support — 3D, Deep Color, x.v.Color™, Lip Sync, Dolby® TrueHD, Dolby Digital Plus, DTS–HD®, and 7.1 PCM.
• EDID Capture — Copies and stores the EDID from a display device.
• Advanced Auto AV Switching Option — Independent (breakaway) audio routing of embedded HDMI content to two balanced audio ports.
• Programmable Step–In over HDMI Functionality — When used in conjunction with compatible step–in devices, such as the SID–X3N and DIP–31 (using an HDMI cable that supports HEC, the HDMI Ethernet Channel).
• True Video Clock Detection.
• Non–Volatile EDID Storage.
• Kramer reKlocking™ & Equalization Technology — Rebuilds the digital signal to travel longer distances.
• Lock Button — Prevents unwanted tampering with the front panel.
• Internal Pattern Generator.
• Embedded Web Pages — Provide remote configuration and operation.
• Static or Dynamic DHCP IP Addressing.
• Flexible Control Options — Front panel buttons, IR remote (available upon request) , optional external remote IR receiver, RS–232, Ethernet, buttons and LED over contact closure, embedded Web server, Kramer Protocol 3000 support.
• USB Port — For upgrading firmware.

VS−88UT is an all−in−one 4K@60Hz (4:2:0) Audio−Video presentation system with integrated range extension and an integrated control system master.

The unit switches the video, embeds the audio and outputs the signal to both an HDMI and an HDBaseT 2.0 with USB extension and PoE on the HDBaseT output ports.

Outstanding audio support includes balanced stereo audio, unbalanced stereo audio, and de−embedded audio sources that output to embedded audio, balanced stereo audio as well as a power amplified audio output.

VS−88UT includes a master room controller that can operate over Ethernet (LAN) with control ports that include: one bidirectional RS−485, four RS−232, four IR, four GPI/O, and eight relays to control a wide variety of AV devices. It includes a KNET™ connector interface that enables access to the master controller from auxiliary room controllers such as control keypads. The unit can also provide power to auxiliary room controllers via the KNET™ connectors. VS−88UT includes an Ethernet gateway to control and manage remote I/O ports. Compatible with K-Control only.

• Versatile All–in–One Solution — Provides a high–performance AV presentation matrix, powerful HDBaseT signal extender and fully featured, programmable master room controller in one unit.
• High–Performance, Professional AV Matrix — Switches 6 4K@60Hz (4:2:0) HDMI inputs and 2 HDBaseT 2.0 signals to 2 4K@60Hz (4:2:0) HDMI outputs and 2 HDBaseT 2.0 signals at up to 10.2Gbps (3.4Gbps per graphics channel) data rate. Signals are HDCP and DVI compliant with Deep Color, 3D, and 7.1 PCM. Includes active source & acceptor detection, auto–switching and auto–scanning of inputs, and a non–volatile memory that retains the last configuration, after switching the power off and then on again.
• Flexible Audio Extraction, Embedding and Control Options — Includes 4 balanced stereo or 8 microphone audio inputs (selectable), 4 unbalanced stereo inputs, 2 line–out balanced stereo audio outputs and one audio amplified output. Features audio volume control, audio breakaway and AFV (audio–follow–video) operation support. Global mute for both video and audio outputs enables smooth integration of the audio system with a public announcement audio system in case of an emergency event.
• Powerful HDBaseT Extender — Extends signals up to 100m at 4K @60Hz (4:2:0), up to 130m (430ft) at full HD (1080p @60Hz 36bpp), and up to 180m (590ft) at ultra mode and full HD (1080p @60Hz 24bpp). Featuring Kramer reKlocking™ and Equalization Technology that rebuilds the digital signal to travel longer distances. Note: For optimum range and performance, use recommended Kramer cables.
• Programmable Master Room Controller — Connect multiple peripheral devices and control them using intuitive embedded web pages. Schedule actions and macros to automate device control.
• Multi–Client IP — Simultaneous IP control communication with up to 15 IP control clients.
• Diverse and Abundant Control Port Formats — Includes USB 1.1 & USB 2.0 (up to 127Mbps) via 2 USB type–A and 2 USB type–B ports, 6 IR Ports, 1 Ethernet port, 1 1G Ethernet port for HDBaseT tunneling, 1 K–NET™ connector; 1 RS–485 and 2 RS–232 bidirectional control ports, 4 IR emitter control ports, 4 GPI/O control ports, and 8 relay control ports.
• IP Port Extension and Control — Ethernet port connects to control gateways for I/O port extending, and operating IP controlled devices
• Provides Power and Control in a Single Connection — HDBaseT outputs provide PoE (Power over Ethernet) to compatible devices. K–NET™ connector carries power along with control communication to either a master room controller or auxiliary control keypad.
• Control Volume, Sensors, Locks, and Lighting — Using 4 general–purpose (GPI/O) control ports configured as digital input, digital output or analog input interface.
• Control Screens, Drapes, Shades, Blinds and IR sensors — Using 8 contact closure ports.
• Compatibility with Kramer Software Solutions — Kramer Network Compatible:Remote control and management over customer IP network. Kramer K–Config™ Compatible:Windows based control program with easy configuration and upload to a room controller over customer IP network.
• Advanced EDID Management per Input.
• Convenient Unit Control and Maintenance Options — User–friendly embedded web pages via the Ethernet, Protocol 3000 API, and RS–232 serial commands transmitted by a PC, touch screen system or other serial controller. Firmware Upgrade over Ethernet via a user–friendly software upgrade tool.
• Easy Installation — 19” enclosure for rack mounting a unit in a 2U rack space with included rack ears and universal 100–240V AC power connection.

The Galil 6−CO is a pair of two−way open−back 8Ω speakers designed for mounting in the ceiling. The speakers feature a multi−tap power transformer for selecting direct 8Ω (bypassing the transformer) or 70V/100V power settings suitable for distributed installation.

• Type — 2–way coaxial round open–back ceiling speaker with infinite baffle design.
• Woofer — 6.5" polypropylene cone with rubber surround.
• Tweeter — 0.5" Mylar.
• Frequency Response — 60Hz to 20kHz.
• Impedance — 8Ω.
• Sensitivity — (SPL) 87dB (1W @1m with 1kHz).
• Recommended Power — RMS 30W, 80W max.
• Grill — White baffle aluminum grills.
• Package — 2 speakers (1 pair), template and user manual.

The Galil 8−CO is a pair of two−way, open−back, 8Ω speakers designed for mounting in the ceiling. The speakers feature a multi−tap power transformer for selecting 8Ω or 70V/100V power settings suitable for array installation.

• Type — 2–way coaxial speaker.
• Woofer — 8” polypropylene cone.
• Tweeter — 1” silk dome.
• Frequency Response — 60Hz to 20kHz @ ±3dB.
• Impedance — 8Ω.
• Power Handling — 50W RMS, 140W continuous program.
• Transformer Taps — 70V: 50W/25W/12W/6W/Off (Lo–Z); 100V: 50W/25W/12W/Off (Lo–Z).
• Package Includes — 2 speakers (1 pair), cutout template and user manual.
• Mounting Bracket (Optional) — SKIC–8.

The Galil 6−AW on−wall outdoor speaker features a multi−tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings, which are suitable for an array installation. Suitable for outdoor installations and applications. Available in white or black.

• IP 66 Certified — Withstands heavy showers and other outdoor conditions.
• Type — 2–way on–wall speaker.
• Woofer — 6.5” polypropylene cone.
• Tweeter — 1” silk dome.
• Impedance — 8Ω.
• Power Handling — 30W RMS 80W, continuous program.
• Transformer Taps — 70V: 30W/15W/7.5W/3.7W/Off (Lo–Z); 100V: 30W/15W/7.5W/Off (Lo–Z).
• Package Includes — 2 speakers (1 pair), u–mount brackets, grommets.
• Colors Available — Black and white

The Galil 5−O On−wall Speaker features a multi−tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings that are suitable for an array installation. Available in white.

• Type — 2–way on–wall speaker.
• Woofer — 5.25” polypropylene cone.
• Tweeter — 0.5” Mylar dome.
• Impedance — 8Ω.
• Power Handling — 30W RMS, 80W continuous program.
• Transformer Taps — 70V — 20W/10W/5W/2.5W/Off (Lo–Z), 100V — 20W/10W/5W/Off (Lo–Z).
• Package — 2 speakers (1 pair).

The Galil 6−O on−wall speaker features a multi−tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings, which are suitable for an array installation. Available in white or black.

• Type — 2–way on–wall speaker.
• Woofer — 6.5” polypropylene cone.
• Tweeter — 1” silk dome.
• Impedance — 8Ω.
• Power Handling — 40W RMS, 110W continuous program.
• Transformer Taps — 70V: 30W/15W/7.5W/3.7W/Off (Lo–Z); 100V: 30W/15W/7.5W/Off (Lo–Z).
• Package Includes — 2 speakers (1 pair).

The Galil 6−C Closed−back Ceiling Speaker features a multi−tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings that are suitable for an array installation.

• Type — 2–way coaxial speaker.
• Woofer — 6.5” polypropylene cone.
• Tweeter — 0.5” Mylar dome.
• Impedance — 8Ω.
• Power Handling — 30W RMS, 80W continuous program.
• Transformer Taps — 70V: 30W/15W/7.5W/3.7W/Off (Lo–Z); 100V: 30W/15W/7.5W/Off (Lo–Z).
• UL 1480 & 2043 Listed
• Package Includes — 2 speakers (1 pair), ceiling mounting kit, template and user manual.

The VS-211HDxl is a high-performance automatic switcher for 3G HD-SDI video signals. When configured as a standby switcher, it switches to the secondary input when the primary input is lost.

Smart panoramic camera that keeps everyone in view

Get the full picture even in the smallest meeting room. This 4K wall−mount camera captures clear video across a full 180° field of view, ensuring even people sitting close to the camera and on the far sides of the room are clearly seen. It automatically recognizes and zooms in on meeting participants, follows speakers as they move around, and auto−adjusts when attendee numbers change.

Description

Kramer's C−MHMA/MHMA is a flexible high−speed HDMI cable with Ethernet and 3.5mm stereo audio. It is a high−performance cable with molded HDMI connectors at both ends that supports signals up to 1920x1200 @60Hz and HDMI Ethernet Channel, 12−bit Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD, CEC. The cable does not embed audio.

Features

• K–Lock Pull–Resistant Connectors — Provides 15lbs of restraining force for a non–slip connection.
• Varied Selection of Lengths — Available in versions of 0.9 to 7.6m (3, 6, 10, 15, 25ft)

KDock−5 is a USB−C hub multiport adapter. KDock−5 can connect your USB−C device to HDMI™, DisplayPort video outputs, 3 USB 3.2 Gen 1 ports, an Ethernet port, an audio and microphone port, and USB−C charging pass−through port (1:8).

KDock−5 is ideal as a personal work station at the office/or at home, and for small meeting rooms or huddle spaces.

• Supports HDMI and DisplayPort video outputs.
• Supports USB 5G speed connection between host and docking station.
• Supports Ethernet 1Gbps.
• Includes a 3.5 mm headset jack

Kramer’s BC-2S is a high−quality twisted pair cable designed for connecting speakers and amplifiers in commercial or residential AV systems.

• Quality Construction — Conductors are stranded 16AWG copper and the conductor jackets are color–coded red/black. Rugged and flexible jacket with sequential markings every meter. Low capacitance due to high strand count, 26/30.
• Length — Available in reels of 300m (985ft).

Comparable to Dukane "V" Cable, 176-306 and 176-406

Kramer’s BC−2T is a high−quality, dual shielded pair cable designed for routing balanced stereo mic or line level audio signals in commercial or residential AV systems.

• Quality Construction — Rugged and flexible jacket with sequential markings every meter.
• Easy Stripping — Exceptionally easy to strip because the foil shield is bonded to the inside of the jacket.
• Length — Available in reels of 300m (985ft).

Comparable to Dukane "D" Cable, 176-236 or 176-436.

Kramer’s BC−1T is a high−quality shielded pair cable designed for routing balanced mono or unbalanced stereo mic or line level audio signals in commercial or residential AV systems.

Available in reels of 300m (985ft).

Equivalent to Dukane "A" Cable part number 176-20.

MegaEdge is a portable power station that delivers all−day power for mobile devices. Easily attach the unit to a stationary desk, rolling work surface or podium, giving your students and staff the freedom and flexibility required in today’s modern BYOD classroom. Powered by high capacity 80,000mAh lithium batteries and featuring AC, USB and USB−C outlets, MegaEdge expertly answers the power issue posed by the multitude of mobile devices in modern learning environments.

Charging power cord sold separate.

Kramer's PS−2405 is a desktop power supply with a standard 2−pin terminal block connector that provides 24V DC / 5A to any compatible device.

The Galil 2−C is a 2.5” full−range closed−back speaker with ceramic terminals and a plastic self−extinguishing back−can. It is especially designed to meet the requirements of fire alarm systems in public spaces and is EN 54−24 certified.

• Type — Closed–back ceiling speaker.
• Woofer — 2.5” paper cone.
• Impedance — 8Ω (transformer tap in off position).
• Power Handling — 10W RMS, 30W continuous program.
• Transformer Taps — 70V — 3W/1.5W/0.75W/8Ω/10W/Off (Lo–Z); 100V — 6W/3W/1.5W/8Ω/10W, Off (Lo–Z).
• Packaging — These are priced individually and can be sold individually. (Full carton size is 18 speakers)

The Galil 4−CO is a pair of two−way, open−back, 8Ω speakers designed for mounting in the ceiling. The speakers feature a multi−tap power transformer for selecting 8Ω or 70V/100V power settings suitable for array installation.

• Type — 2–way coaxial speaker.
• Woofer — 4" polypropylene cone.
• Tweeter — 0.5” Mylar dome.
• Frequency Response — 80Hz to 20kHz@ ±3dB.
• Impedance — 8Ω.
• Power Handling — 15W RMS, 40W continuous program.
• Transformer Taps — 70V: 15W/7.5W/3.7W/Off (Lo–Z); 100V: 15W/7.5W/Off (Lo–Z).
• Package Includes — 2 speakers (1 pair), cutout template and user manual.

The Galil 4−C Closed−back Compact Ceiling Speaker features a multi−tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings that are suitable for an array installation. The Galil 4−CO open−back version is also available.

• Type — 2–way coaxial speaker.
• Woofer — 4” polypropylene cone.
• Tweeter — 0.5” Mylar dome.
• Impedance — 8Ω.
• Power Handling — 30W RMS, 80W continuous program.
• Transformer Taps — 70V: 30W/15W/7.5W/3.7W/Off (Lo–Z); 100V: 30W/15W/7.5W/Off (Lo–Z).
• UL 1480 & 2043 Listed
• Package Includes — 2 speakers (1 pair), ceiling mounting kit, template and user manual.
• Installation Dimensions — External diameter: 19.5cm (7.68"); cutout diameter: 16.7cm (6.57")

• Type — 2–way on–wall speaker.
• Woofer — 4” polypropylene cone.
• Tweeter — 0.5” Mylar dome.
• Impedance — 8Ω.
• Power Handling — 20W RMS, 60W continuous program.
• Transformer Taps — 70V: 5W/2.5W/1.2W/Off (Lo–Z); 100V: 10W/5W/2.5W/Off (Lo–Z).
• Package Includes — 2 speakers (1 pair).

• Dante Network Interface.
• PoE Acceptor.
• Interoperability — Supports AES67 and Dante allowing high–performance interoperability between IP–based audio networking systems.
• Inputs — 2 balanced mono audio on a 3–pin terminal blocks.
• Output — 2 Dante channels on an RJ–45 connector.
• Output Volume Control.
• Versatile Control — Via the Dante IP control matrix and Kramer Protocol 3000 via RS–232 connection.
• Professional, Studio Grade Signal Conversion Technology — Includes the latest generation 32–bit advanced Digital Analog Converter architecture to achieve excellent dynamic performance and improved tolerance to clock jitter. Maintains the quality of the original audio signal with selectable sampling rates up to 96 kHz.
• Easy Installation — Single twisted–pair cable for signal and power wiring. Compact PicoTOOLS® fan–less enclosure for device–back mounting, or side–by–side mounting of 4 units in a 1U rack space with the recommended rack adapter.

Omnidirectional, compact speakerphone for crystal−clear sound

Ensure all meeting participants are heard clearly from every seat in the room. With 360° omnidirectional audio pickup, high−fidelity sound and simple operation, the K−Speak enhances the audio experience for everyone – whether in the room or joining remotely. The small size and multiple connection options are a perfect fit for huddle rooms and small meeting rooms, where table space is at a premium.

• Fast setup, flexible configuration
  • Fast setup and installation — Connect via AUX, Bluetooth, Bluetooth dongle or USB
  • Can be connected to the K–180Mini via USB for seamless full–room audio and video
  • Two K–Speak speakerphones can be connected, to cover larger tables
  • Optional wireless charging — Reduces tabletop clutter
• Crystal–clear sound
  • 6–element microphone with voice pickup radius of 5m (16.4 ft)
  • Noise and echo cancellation
  • Up to 8 hours operation

Applications

• Enterprise meeting rooms
• Educational spaces
• Any application where high–quality video conferencing is required

The TR-1A is a high-performance isolation transformer for balanced mono audio signals. It completely isolates devices to eliminate hum, ground loops and DC offsets that can degrade the audio quality.

• S/N Ratio — 83dB @+4dBu, 1kHz.
• External Input & Output Ground Terminals.
• Grounding Options — DIP–switch selectable.
• Passive — No power required.
• Compact Kramer TOOLS™ — 3 units can be rack mounted side–by–side in a 1U rack space with the recommended rack adapter

The RC-IR3 is an infrared wireless remote control unit for all Kramer IR controllable switchers. The remote can switch up to 96x96 inputs and outputs.

• Memory Locations — Stores up to 99 multiple switches as presets to be recalled and executed when needed.
• Kramer Universal Remote — Includes the protocols of all Kramer devices and is programmable to control any Kramer machine.
• Non–volatile Memory — Retains the last setting, even after the power supply is interrupted.
• Transmits to Built — in and Remote Receivers. — Range up to 15m (50ft) or 60m (200ft) with optional external IR receiver (C–A35M/IRR–50) and 3 extension cables.

The VA−102P5 is a 10−output power supply that powers 5V DC powered devices. The VA−102P5 can supply a maximum of 1.8A of current to each of ten devices for a total of 18A. The power supply is especially useful in high−population installations for saving space and eliminating a large number of 5V DC power adapters. The MD model is suitable for medical applications.

• Outputs — 10 5V DC outputs that supply 1.8A max. current for each output for a total of 18A.
• Indicator — Power LED.
• Space Saving — Replaces up to 10 individual 5V DC power supplies for Kramer TOOLS™, Kramer PicoTOOLS™, and Kramer 5V DC Desktop models.

The VA−102P12 is a 10−output power supply that powers 12V DC powered devices. The VA−101P12 can supply a maximum of 1A of current to each of ten devices for a total of 10A. The power supply is especially useful in high−population installations for saving space and eliminating a large number of 12V DC power adapters. The MD model is suitable for medical applications.

NT−52P is a compact universal−I/O PoE control gateway, capable of plug and play deployment over customer Ethernet LAN for remote control of customer−controlled devices via two universal I/O ports. The ports can be configured as bidirectional RS−232, crossed RS−232, RS−485, IR, GPI/O or relay control connections. Multiple control clients can be IP−connected to NT−52P control gateway for concurrent control of devices, such as AV scalers, video projectors and displays, audio amplifiers, DVD players, sensors, screens, shades, door locks, and lighting.

• Innovative Universal I/O Ports — Remote IP–based control of any device connected to the control gateway universal I/O ports, with selectable port configuration to bidirectional RS–232, RS–232 cross, RS–485, IR, GPI/O or relay control. Each port is adaptable for any room device control simply by toggling a button.
• Multiple IP Connected Clients — Remotely connected over customer Ethernet network, concurrently controlling any devices connected to control gateway universal I/O ports.
• Easy & Reliable Installation — With single PoE cable for both, powering and connectivity, and Plug and Play IP installation with dynamic (DHCP) address resolution and auto device discovery over customer LAN. Highly–resilient powering with multiple power options — Power over Ethernet per IEEE 802.3af standard, and PSU. Compact, designed for piggy–back installation, such as behind a TV or display, with the ability to draw power from device USB port and Ethernet connectivity.
• Remote Management — Built–in web UI for remote browser–based management and support, by multiple IP–clients over customer LAN. Easy firmware upgrades, either remotely via customer LAN, or locally via device USB port.

FC−7P is a compact GPIO/relay multi−function control gateway with Power over Ethernet, capable of plug and play deployment over a customer Ethernet LAN for remote GPI/O and relay control of customer devices. Multiple control clients can be IP−connected to the FC−7P control gateway for concurrent control of devices such as lights, shades and screens.

• Dual–Function I/O Ports — Remote IP–Based control of devices connected to the control gateway dual–function I/O ports, with selectable port configuration to bidirectional GPIO or relay control.
• Multiple IP Connected Clients — Remotely connected over customer Ethernet network, concurrently controlling any devices connected to control gateway universal I/O ports.
• Easy & Reliable Installation — With single PoE cable for both, powering and connectivity, and Plug–and–Play IP Installation with dynamic (DHCP) address resolution and auto device discovery over customer LAN. Highly–resilient powering with multiple power options — USB, Power over Ethernet per IEEE 802.3af standard, and optional PSU (not included). Compact, designed for piggy–back installation, such as behind a TV or display, with the ability to draw power from device USB port and Ethernet connectivity.
• Remote Management — Built–in web UI for remote browser–based management and support, by multiple IP–clients over customer LAN. Easy firmware upgrades, either remotely via customer LAN, or locally via device USB port.