VGA Extenders

The PT−110EDID is a twisted pair transmitter for computer graphics video signals. It converts a computer graphics signal into a twisted pair signal that is converted back to a computer graphics video signal when used with a compatible receiver.

• Max. Resolution — WUXGA & 1080p.
• HDTV Compatible.
• EDID Capture — Copies and stores the EDID from a display device.
• Sync Polarity Settings — H & V switches for improved display compatibility with the CAT 5 outputs.
• System Range — Up to 100m (320ft). Greater distances possible depending on resolution and cable.
• Cable — UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
• Power Connect™ System — A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other.
• Ultra Compact Pico TOOLS™ — 4 units can be rack mounted side–by–side in a 1U rack space with the recommended rack adapter.

The PT-110xl is an extended range UXGA line transmitter that receives a UXGA signal and transmits it over a CAT 5/6 cable to the PT-120xl or TP-120 receiver.

• Resolution — Up to WUXGA & 1080p.
• HDTV Compatible.
• Power Connect™ System — A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other.
• Extended Transmission Range — Up to 250m (820ft) when used with Kramer’s twisted pair xl receivers (such as PT–120xl, TP–122xl or TP–126xl).
• EDID Capture — Copies and stores the EDID from a display device.
• Increased Noise Immunity — An increased level of protection against noise, spikes and interference in adverse environments.

The PT-120xl is an extended range twisted pair receiver for computer graphics video signals. It converts a twisted pair signal from a WP-110 transmitter (or other compatible Kramer transmitter) to a computer graphics signal.

• HDTV Compatible.
• Max. Resolution — WUXGA & 1080p.
• Level (Gain) & EQ (Peaking) Controls.
• System Range — Up to 250m (820ft). Greater distances possible depending on signal resolution and cable.
• Cable — UTP (unshielded twisted pair) or STP (shielded twisted pair) cable such as CAT 5.
• Power Connect™ System — A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other.

The TP-46N is a twisted pair receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP-45 transmitter converts an audio and video signal to a twisted pair signal and the TP-46N converts the twisted pair signal back into audio and video signals.

• HDTV Compatible.
• Max. Resolution — WUGXA (15–pin HD) & 1080p (component).
• Level (Gain) & EQ (Peaking) Controls.
• Power Connect™ System — Only one unit in a system, the transmitter or the receiver needs to be connected to a power source when the devices are within 50m (150ft) of each other.
• Link LED — Indicates the receiver is receiving a signal.
• System Range — Up to 100m (330ft).
• Cable — UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
• Compact Kramer TOOLS™ — 3 units can be rack mounted side–by–side in a 1U rack space with the recommended rack adapter.