TOA N-8000 Series IP Intercom System

IP Master Station (N-8600MS)

The N-8600MS is the IP Master Station for the N-8000 intercom system.

Remote Microphone Station (N-8610RM)

The N-8610RM Remote Master Station is an IP remote microphone station that employs packet audio technology.

IP-65 Rated Outdoor Door Station (N-8640DS)

The N-8640DS is an IP65, impact resistant IP door station with a separate microphone and speaker, allowing full duplex conversations with Master Stations.

IP Indoor Intercom Station (N-8650DS)

The N-8650DS is an indoor IP door station with a separate microphone and speaker, allowing full duplex conversations with Master Stations

N-8000EX IP Intercom Exchange (4 Voice Links) (N-8000EX)

The N-8000EX IP Intercom Exchange uses packet audio technology to permit connection of up to 16 N-8000 series 2-wire master or door stations.

N-8010EX IP Intercom Exchange (1 Voice Link) (N-8010EX)

The N-8010EX IP Intercom Exchange uses packet audio technology to permit connection of up to 16 N-8000 series 2-wire master or door stations.

N-8000RS Sub Station Interface Unit (N-8000RS)

The N-8000RS Substation Interface Unit uses packet audio technology to permit connection of up to 16 RS-1xx series call switches or door stations.

N-8010RS Sub Station Interface Unit (N-8010RS)

The N-8010RS Substation Interface Unit uses packet audio technology to permit connection of up to 16 RS-1xx series call switches or door stations.

N-8000RS Adapter (Q-N8000LC AM)

Converts the output signal of the interface unit into a line level audio signal or a 25V line speaker output

Telephone Interface Unit (N-8000AL)

Audio Interface Unit (N-8000AF)

The N-8000AF provides either an analog audio input/output bridge to the N-8000 system, a bell schedule generator with internal tones, or record functionality for archival purposes.

Central Office Interface Unit (N-8000CO)

The N-8000CO is a C/O interface unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It has an analog central office line circuit, allowing the intercom station to make and receive calls to and from the telephone line.

Direct Selection Unit (N-8000DI)

The N-8000DI is a Direct select unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It is equipped with each 32 contact inputs and outputs, and the indicators on the front panel indicate the output statuses.

Multi-Interface (BGM, TEL, EXES, Control I/O) (N-8000MI)

The N-8000MI is a multisource interface for the N-8000 intercom system.

Standard Master Station (N-8010MS)

The N-8010MS is a standard master station (no LCD display) that connects to an N-8000EX or N-8010EX intercom exchange by a single twisted pair wire.

Handsfree Master Station (N-8011MS)

The N-8011MS is a hands-free master station that connects to an N-8000EX or N-8010EX intercom exchange by a single twisted pair wire.

Multifunction Master Station (N-8000MS)

The N-8000MS is a multi-function master station that connects to an N-8000EX or N-8010EX intercom exchange by a single twisted pair wire.

Panel-Mount Master Station (N-8031MS)

The N-8031MS is a flush- or surface-mount master station designed to operate in conjunction with TOA IP Intercom Exchange and features high quality hands-free conversation.

Indoor Sub-Station (N-8050DS)

Designed to connect to the IP Intercom Exchange, the N-8050DS is a door station featuring high quality hands-free conversation. It has a contact output (momentarily closed) to remotely control an electronic door lock.

Q-N8050WP Outdoor Sub-Station (Q-N8050WP)

The Q-N8050WP is a weather resistant door station designed to connect to an N-8000EX or N-8010EX intercom exchange. It provides high quality, hands-free conversation with a master station on an N-8000 system.

2-Gang Indoor Sub-Station (N-8052DS)

The N-8052DS is a 2-gang version of the N-8050DS. It is a door station designed to connect to an N-8000EX or N-8010EX intercom exchange.

Build-Your-Own Intercom Master Station PCB (N-8031SB)

The N-8031SB is a PCB kit version of the N-8031MS for custom installations where a custom interface is desired. It connects to an N-8000EX or N-8010EX exchange by a single twisted pair cable.

Build-Your-Own Intercom Sub-Station PCB (N-8050SB)

The N-8050SB is a printed circuit board unit for the N-8050DS Door Station, You can make the sub station suitable for applications using the N-8050SB in combination with the operation panel section to be prepared separately.

Call/Privacy Switch Station (RS-140)

The RS-140 dual button call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides Call (Red) and Privacy (white) buttons.

Call Switch Station (RS-143)

The RS-143 single button call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a single red call button.

Call/Emergency Switch Station (RS-144)

The RS-144 dual button call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces.  It provides Emergency (Red) and Normal (white) buttons that can be individually programmed to report to any master station based on job specification.

Economy Indoor Remote Sub-Station (RS-150)

The RS-150 single button indoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces.

Indoor Vandal Resistant Remote Sub-Station (RS-160)

The RS-160 vandal resistant single button indoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces.

Outdoor Vandal Resistant Remote Sub-Station (RS-170)

The RS-170 vandal resistant single button outdoor call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces.

Outdoor Panic Vandal Resistant Remote Sub-Station (RS-180)

The RS-180 panic vandal resistant single button outdoor call panel substation is ADA compliant and is designed to be used with the N-8000RS or N-8010RS substation interfaces.

Wall Mounting Bracket for N-8000 Series Exchanges (YC-850)

The YC-850 Wall mounting bracket is designed to mount the N-8000 Series Interface units to a wall.