Crown
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification.
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification.
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification.
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification.
Crown XLi3500 2700 Watt 2 Channel Audio Power Amplifier (XLi3500)
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.
Features
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Electronically balanced RCA and XLR inputs; Speakon and binding post outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio- frequency interference
- Efficient forced-air cooling prevents excessive thermal buildup
Specifications
- Frequency Response (at 1 Watt): 20Hz - 20kHz, 0/-1dB
- Total Harmonic Distortion (THD): < 0.5%, 20 Hz - 20 kHz
- Intermodulation Distortion (IMD) (60 Hz and 7 kHz at 4:1 from full rated output to -30 dB: =/ < 0.35%
- Slew Rate: >10V/us
- Voltage Gain: 31dB
- Damping Factor (8ohms), 10 Hz-400 Hz: > 200
- Signal to Noise Ratio (A-weighted): >100dB
- Input Sensitivity for Full Rated Power at 8 Ohms: 0.775V or 1.4V
- Input Impedance (nominal)
- Balanced: 20 K Ohm
- Unbalanced:10 K Ohm
- AC Line Voltage and Frequency Configuration ( 10%):
- 120V~ 60Hz
- 220V~ 50/60Hz
- 230-240V~ 50/60Hz
- Width: 19 in. (48.3cm)
- Height: 3.5 in. (8.9cm)
- Depth: 14.4 in. (31.5cm)
- Weight: 43.1 lbs (11.4kg)
Warranty
Crown products are covered by a 6 Year Warranty
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification.
Crown XLi1500 900 Watt 2 Channel Audio Power Amplifier (XLi1500)
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.
Features:
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Electronically balanced RCA and XLR inputs; Speakon and binding post outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio- frequency interference
- Efficient forced-air cooling prevents excessive thermal buildup
Specifications:
- Frequency Response (at 1 Watt): 20Hz - 20kHz, 0/-1dB
- Total Harmonic Distortion (THD): < 0.5%, 20 Hz - 20 kHz
- Intermodulation Distortion (IMD) (60 Hz and 7 kHz at 4:1 from full rated output to -30 dB: =/ < 0.35%
- Slew Rate: >10V/us
- Voltage Gain: 31dB
- Damping Factor (8ohms), 10 Hz-400 Hz: > 200
- Signal to Noise Ratio (A-weighted): >100dB
- Input Sensitivity for Full Rated Power at 8 Ohms: 0.775V or 1.4V
- Input Impedance (nominal)
- Balanced: 20 K Ohm
- Unbalanced:10 K Ohm
- AC Line Voltage and Frequency Configuration ( 10%):
- 120V~ 60Hz
- 220V~ 50/60Hz
- 230-240V~ 50/60Hz
- Width: 19 in. (48.3cm)
- Height: 3.5 in. (8.9cm)
- Depth: 12.4 in. (31.5cm)
- Weight: 28 lbs (11.4kg)
Warranty:
Crown products are covered by a 6 Year Warranty
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification.
Crown XLi2500 1500 Watt 2 Channel Audio Power Amplifier (XLi2500)
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.
Features
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Electronically balanced RCA and XLR inputs; Speakon and binding post outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio- frequency interference
- Efficient forced-air cooling prevents excessive thermal buildup
Specifications
- Frequency Response (at 1 Watt): 20Hz - 20kHz, 0/-1dB
- Total Harmonic Distortion (THD): < 0.5%, 20 Hz - 20 kHz
- Intermodulation Distortion (IMD) (60 Hz and 7 kHz at 4:1 from full rated output to -30 dB: =/ < 0.35%
- Slew Rate: >10V/us
- Voltage Gain: 31dB
- Damping Factor (8ohms), 10 Hz-400 Hz: > 200
- Signal to Noise Ratio (A-weighted): >100dB
- Input Sensitivity for Full Rated Power at 8 Ohms: 0.775V or 1.4V
- Input Impedance (nominal)
- Balanced: 20 K Ohm
- Unbalanced:10 K Ohm
- AC Line Voltage and Frequency Configuration ( 10%):
- 120V~ 60Hz
- 220V~ 50/60Hz
- 230-240V~ 50/60Hz
- Width: 19 in. (48.3cm)
- Height: 3.5 in. (8.9cm)
- Depth: 12.4 in. (31.5cm)
- Weight: 25.1 lbs (11.4kg)
Warranty
Crown products are covered by a 6 Year Warranty
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification.
Crown XLi800 600 Watt 2 Channel Audio Power Amp (XLi800)
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.
Features
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Electronically balanced RCA and XLR inputs; Speakon and binding post outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio- frequency interference
- Efficient forced-air cooling prevents excessive thermal buildup
Specifications
- Channels: 2
- 4-Ohm Dual: 300 Watts
- 8-Ohm Dual: 200 Watts
- 8-Ohm Bridged: 600 Watts
- Frequency Response (at 1 Watt): 20Hz - 20kHz, 0/-1dB
- Total Harmonic Distortion (THD): < 0.5%, 20 Hz - 20 kHz
- Intermodulation Distortion (IMD) (60 Hz and 7 kHz at 4:1 from full rated output to -30 dB: =/ < 0.35%
- Slew Rate: >10V/us
- Voltage Gain: 31dB
- Damping Factor (8ohms), 10 Hz-400 Hz: > 200
- Signal to Noise Ratio (A-weighted): >100dB
- Input Sensitivity for Full Rated Power at 8 Ohms: 0.775V or 1.4V
- Input Impedance (nominal)
- Balanced: 20 K Ohm
- Unbalanced:10 K Ohm
- AC Line Voltage and Frequency Configuration ( 10%):
- 120V~ 60Hz
- 220V~ 50/60Hz
- 230-240V~ 50/60Hz
- Width: 19 in. (48.3cm)
- Height: 3.5 in. (8.9cm)
- Depth: 12.4 in. (31.5cm)
- Weight: 25.1 lbs (11.4kg)
Warranty
Crown products are covered by a 6 Year Warranty
The XLi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification.
- 1